OK so I built a system and after a frustrating bout with BSODs caused by a bad mobo (replaced) i finally got it to work. However i was just browsing the interwebs and i got a bluescreen in fact ive gotten several 3 have been stop code 3b
Specs
Windows 7 Ultimate
AMD FX-4100
ASUS Sabertooth 990FX
8gb of ram
560 Ti 1gb
ran memtest for 12 or so passes while i was at work no issues with it did a sfc/ scannow and all that good stuff. driver scanner is turning up clean thinking this is beyond my knowledge they happen every 3-4 days and its quite irritating. all dumps as of late attached
I have a new custom built computer put together by someone I work with. I have been plagued with problems and I think it's hardware related. I got my friend to reinstall Windows but it crashed several times before install completed. He said he tried on my SSD and Samsung HD but still the same problems occur.Ran Memtest and passed several cycles but tried again and got errors. I removed a ram stick and it passed but got a BSOD after 30 minutes of browsing the web. Then the other stick had the same problems but passed Memtest for 20 minutes until the text on screen garbled where errors are usually listed. I reran test and it passed for a long time. I have no overclock and everything is running at correct voltage. Seems to be very random and can happen when purposely restarting my PC or doing barely anything at all.I'm starting to think it's either the RAM or motherboard causing the problems. Here are my components-
I've recently built a a computer for my sister out of spare parts. Every couple of hours it just seams to BSOD. I'm not the most skilled pc builder as I'm only 14. At first it just freezes but then it just goes to the blue screen. I have included a BSOD Dump and my system spec is as follows;
Motherboard: ASUS M3N HT Deluxe (MEMPIPE EDITION) CPU: AMD Phenom X4 9550 @2.2GHZ (not overclocked) Chip set: nForce 780a sli spp Ram:4gb OCZ DDR2 HDD: 1x80gb sata, 1x120gb ide GPU: ATI RADEON HD 4870 1gb
I am running a Windows 7 Ultimate 64 Bit and I have reinstalled it twice?
so i have come to conclude the blue screen happens when ever it wants and i took a picture on my phone so i have some info, (0x00000000000000000000041790, 0xFFFFFA80016A? after that i cant see any more cuz i had only a second to take the pic
also i attached the info suggested in the locked threads
I just purchased a new build, listed below, and cannot figure out why I am getting random hard freezes. There is no blue screen of death, just hard freeze required restart. I get about 3-5 a day.
GIGABYTE GA-H61MA-D3V LGA 1155 Intel H61 SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard Seagate Barracuda ST500DM002 500GB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Intel Core i5-2500 Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 Antec NEO ECO 620C 620W Continuous Power ATX12V v2.3 / EPS12V 80 PLUS Certified Active PFC Power Supply XFX AMD Radeon HD 6870 900M 1 GB DDR5 DUAL MINIDP HDMI DUAL DVI PCI-E Video Card (HD687AZHFC)
I am running low on time, as my one month for newegg returns runs out soon. I lost a week having to RMA the hard disk already, as the first one that came was DOA. I have performed furmark for 20 minutes, no failure. Memtest overnight, no failure. Seagate tools, passed test (didn't do thorough long test). Prime95 CPU small FFT for 8 hours, no problem. Prime95 CPU blend for 3 hours, no problem. I have tried reinstalling windows 7, and I have updated the BIOS.
I built a computer about a month ago and ever since the first attempt to install windows it has been giving me blue screens. The computer is working someone fine most of the time now, but still has a daily to twice a day blue screen error. I have done everything that google has said (Memtest, driver updates, HDD diagnostics, BIOS update, check registry, scan for virus, etc.)
I have been experiencing random reboots with my fresh Win 7 x64 build. I am suspecting either a bad ram sticks or ATI video card issue. I have attached the minidump and performance report logs.
Been having some crashes.At first they occurred on start up. Claiming the computer wasn't properly shut down. Now today, the other crashes started, with the first happening out of nowhere, the second happening upon starting a video game. I've been without crashes for a while now, only having used my browser(Opera) and copying some files to an external hard drive. As well as the SF tool.I only have 2 dump files available. SF tool file should be in attachments, unless I made a mistake somewhere
I reformatted my computer multiple times, yet my computer seems to BSOD randomly.What happenes is that everything becomes unresponsive; cant alt+tab, cant ctrl+alt+del etc etc. everything freezes randomly... then boom, BSOD. its happened twice, with no apparent pattern.And then, when it restarts, it tries booting but then it goes into the boot selection screen and my SSD is nowhere to be found. I have to power off then power on again for it to boot up and log in.
- System - Provider [ Name] Microsoft-Windows-Kernel-Power [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
- the original installed OS on the system? this is a built computer by myself. have had 64 bit forever on here
- an OEM or full retail version? oem
- What is the age of system (hardware)? memory is about 2 years old everything else is about 5 years old
- What is the age of OS installation (have you re-installed the OS?) os was installed a few months ago.attached is the info that was requested. these blue screens happen at completely random times. could be during boot up. could be just sitting in sleep and blue screen.
A couple weeks ago I started having random BSOD and restarts, I have researched several different solutions to no avail. At one point, I thought the problem was solved after restoring a restore point, however, the dreaded BSOD is back after a couple of days.
- Restored the earliest restore point - Ran chkdsk with no errors - Ran full scan AV (just in case) using MSSE. - Updated all Windows and drivers updates.
I believe this is related to a driver issue, however, I'm not sure which one.Attached is both the BSOD App and System Health data.
Basic specs:
- Windows 7 x64 - Original Install - OEM - System age: 6 months - OS install age: 6 months (not reinstalled)
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
I have built a computer almost exactly to the one that they had built for Jeff on Tested.com. Everything seemed to install fine and run smoothly. Recently, I have been getting BSODs and they seem to be somewhat random. Usually when I am watching movies/streaming online/listening to music in Zune or iTunes. I don't really understand why this is happening. I have been looking around the internet and many people say that memory could be the problem but I have tested it with the windows memory test tool, all results have come back with no errors. I for some reason cannot Memtest to run.
All of these components are less than days old, bought new and put straight into this build. Keep getting a BSOD so I guess I'll try to give as much information as I can and hopefully someone can give me a hand.It's also worth noting that it seems to occur more frequently while playing Star Wars the Old Republic but has also occurred while not doing so. [code]
Got to be quick because I've already had a BSOD trying to post this. This is a new build. All new components. All kinds of error codes contantly. I've updated Bios, SSD firmware, all drivers I can find, did a clean reinstall of Windows 7, ran memtest86 twice (20 passes total) on both sticks no errors, ran chkdsk -no errors although I see one today from my bios resetting defaults to IDE instead of ACHI - my fault. Ran Driver Verifier and came up with a violation in Event Viewer but I don't know how to read it. And yes I wear ESD straps etc. when I work on it.Also no overclocking / unlocking - everything is stock / default.
I built this rig 3 weeks ago. Never had any glitches or problems. Just randomly today while web browsing I got a BSOD. I don't know how to access the BSOD files to see the cause. Can someone please help me troubleshoot, i've never dealt with this before. I don't overclock just so everyone knows. I ran prime 95 for about an hour with all passes and perfect temps.
I have built a few computers over the years and this is the first one that has had an issue that has totally stumped me. I have built it for the parents. Now as far as i can tell everything is fine with the build, but the computer is randomly BSOD,especially when running the WINDOWS VERIFIER, to catch the error (BSOD on startup).I have used a program to analyze the results of the Verifier and this is the result:
On Wed 5/23/2012 9:14:30 AM GMT your computer crashed crash dump file: C:Windowsmemory.dmp This was probably caused by the following module: ndisrd.sys (ndisrd+0x266E) Bugcheck code: 0xC4 (0x40, 0x0, 0xFFFFF9800ED66C50, 0x0) Error: DRIVER_VERIFIER_DETECTED_VIOLATION
Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64 This is what what i got from my latest crash.
Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7600.2.0.0.256.1 ID:2068
It is a new build and it runs fine with 2Gb of memory installed, but as soon as i insert a second memory stick it goes through BIOS and 2-5 seconds of the Windows Logo before a bluescreen flashes by and the screen goes black. It will reboot and perform a Windows repair but with the same result. Same thing happens if I install my graphics card.
since running on 2Gb of memory and on-board graphics isn't my plan
I just put together my new computer and I started getting a few different BSOD's. The mostrecent was a Page_fault_in_nonpaged_area. A memory management one happened yesterday also. I'll include the dump files so someone can check them out
I've recently replaced my Win7 (7100) x32 with the x64 version in order to make use of more memory (not yet installed). However, although the rig I'm using had no problems in x32, it keeps BSODing in x64. Are there any commonly known reasons for BSODs in x64 when not in x32?
I have all drivers installed, updated and seemingly working. I get a BSOD within about 20 mins of booting usually. No temp issues with CPU - all under 30 idle and BSOD isn't necessarily when the CPU is stressed.
Specs:
Quad Core 2.4 Q6600 Asus P5K Mobo Asus 8800GTX 2*1Gb Corsair XMS2
I built this PC in February. From day one I have been getting random blue screen errors, with many different bug check and error codes. Bug check 109 seems to be the one I have seen the most. I have ran memtest on my RAM sticks, one came back clean after 8 passes, the other had errors. So I re-installed Windows with only the good RAM stick, and am still getting blue screen crashes. They are, however less frequent. I have downloaded and installed the latest drivers from the manufactures for all hardware components.
I haven't run into this much trouble setting up any of the other PCs I have built, so I am a bit lost trying to figure this out.
Here is a link to the minidump files that have been generated since my last Windows install. [URL] This is all the hardware in my system:
GIGABYTE GA-A75-UD4H socket FM1 motherboard AMD A8-3850 Llano 2.9GHz Socket FM1 100W Quad-Core Desktop APU Corsair Vengeance Blu 8 GB (2X4 GB) PC3-12800 1600mHz DDR3 240-Pin SDRAM Dual Channel Memory Kit CMZ8GX3M2A1600C9B Western Digital Caviar Blue WD5000AAKX 500GB LITE-ON DVD Burner - iHAS124-04 TP-Link TL-WN951N 300Mbps Wireless N PCI Adapter SIGMA Power Engine SP-535 535W ATX12V V2.01 Power Supply
I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later.Well; now is later and I can't figure it out.I've done a re-install of the OS (HP recovery)This system is about a year old and is an HP Pavilion dv6 laptop with AMD Phenom II N850 Triple Core @2.2 ghz 6 gig memory 64 bit Windows 7 Home Premium.
I've been getting a BSOD sometimes on start up or shortly after. I've used the debugger to check the dump file and the driver that would appear to be faulty is dtsoftbus01 which from what I read is daemon tools. I had daemon tools on this computer at one point in time but I've since reformatted my hard drive so daemon tools shouldn't still be installed.
I did my first build a while ago but kept getting the Blue Screen of Death. I got a tech guy in to look at how I built it, do mem tests and hard drive tests and he said that the motherboard must be faulty. I then sent the motherboard back and they gave me a replacement.I now have put it back together and am STILL getting BSOD's or my screen just freezes. It can run for quite a while without crashing if I am just using facebook or just cruising the web but when I start using skype or play games or have a few different programs open it is more likely to crash. However it does crash even when I am just using Chrome.
I've recently built a new PC, it's my first build and I've managed to solve most problems that have occurred but I'm stuck on this one. It will load games fine if i load them straight from turning on the PC but if i run it for a while then load a game it resets itself, and doesn't leave and mini/memory dumps. The system runs fine normally and even with some old games but if i load a new game such as civilization 5 on steam or try running examples in UDK it resets.
Specs:
Mobo: Asus Maximus IV Extreme CPU: Intel Core i7 - 2600k Ram: 8GB G.Skill RipjawsX Graphics: Sapphire Radeon HD 7970 3GB PSU: Antec High Current Pro HCP -750 SSD: Samsung 830 256GB HD: Seagate Barracuda 2TB Cooling: Antec Kuhler H20 920 OS: Windows 7 64bit Home Premium
At first i thought it was overheating but I've checked and the CPU and graphics card don't reach anywhere near a hot temperature before it crashes. I've also taken it to a local computer repair shop and the tests they ran all passed (i don't know what the tests they ran are but i'm going to call them tomorrow and find out / tell them it still crashes)
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.
Ran into issues on build day 2 days ago with crashing driver issues etc. installing drivers was actinglike fliles were corrupt even off the disks.I replaced cables on drives, swapped the Bios for the SATA ports to mimic IDE, installed new version of windows with the Seagate not plugged in. Installed drivers for Mother Board rebooted to Bios swapped back from IDE on the SATA.Puts around a bit no real issues, installed the data drive rebooted and started to install software from steam and origin as well as Windows updates.BSOD a few times,Logged off ran memtest over night passed all 7 tests, ran again on each stick all passed.Windows is freezing trying to install all the updates that is the latest bsod in the log file.the 2tb drive is still uninstalled but seems stable.Not sure what is causing this, I did run CCleaner a few mins ago and it puked a ton of registery errors cleaned them up ran again found more, cleaned now it says it is clean.Here is the zip I am at wits end and do not want to RMA the Seagate if i dont have to but willing to if you all think that is my problem.
