Slow Startup After Upgrade From Build 7022 To 7057
Mar 14, 2009
After I upgrade Windows 7 from build 7022 to 7057 my startup now is really slow. I see boost-screen 4 minutes. Restart was 405 sec. I removed unnecessary services, startup programs, defarg my registry, did a clean install, but nothing of that works.
Can someone confirm that it's a general problem or have I just got a bad D/L.
If I try and UPGRADE from Windows 7 build 7048 X-64 to Build 7057 X-64 it starts OK but after a while (during the expanding files stage) I get error -- some necessary files for installation cannot be copied ??
Clean install seem to wok.
HA1 and checksums of my iso seem correct.
Actually upgrading from a beta to another beta is not a goood idea anyway but I want to make sure that I haven't got a bad D/L before I try an upgrade from a Vista installation.
Installed the update (not a clean install). After about 1.5 hours, everything was back up and went into 7MC. Asked if I wanted to use previous settings, I said yes. Get a Playtime install screen, then get error (although playtime was already installed). Went to the next screen and get my PID key request, type it in and says error (I know which keys to use, installed it about 5 times now).
Try several different options as far as uninstalling playtime, try going through 7MC setup, continue to get the error.
My question is, will the PID registration automatically fail if Playtime is not installed. I'm worried that I now have a useless PID as some others have reported. Installing Windows Vista Home Premium from the reinstall disks hoping I can get the PID to work.
Im running build 7057 on my Asus G50vt-X1 laptop and for some reason when I go to shutdown it will freeze on the shutdown background and not shut down. I'm not quite sure why. I have manually changed the logon and shutdown backgrounds via a regedit but it wouldn't complete the shutdown long before that. Any ideas?
I've upgraded windows 7 from build 7000 to build 7057 (totall reinstall not just upgraded). My pc is connected to the TV (for movies and such), when the computer boots both displays work fine. After logon however I cannot get the second display to work. I can expand them all I want but, it simply won't work.
If you really dislike the pale blue logon screen with that ridiculous "Peace Dove" (ZAP it someone) please then GOOD news.
Stardocks LOGONSTUDIO works on both X-86 and x-64 versions of Windows 7 including build 7057 (which is the one with the hideous Dove on it and the pale blue insipid colour).
Whilst the supplied screens aren't very adventurous you can download others or "Roll your Own".
Maybe we should have a competition here -- It's a bit difficult to post the image as one hasn't logged in yet --so you can't capture the screen.
I might have a go by using a VM and then capturing the Virtual Machine image from the Host OS.
Are branch builds of RC1 capable of using windows update to bring it up to the later RC builds? or will it be like the beta's and require a fresh install or upgrade?
I ask, because if 7057 is a RC branch build, then it would be convenient if I could just use windows update the rest of the time until the full version is released.
If you want to revert back to build 7048 without having to do a fresh install and re-install all your programs you CAN actually do an "Update" from Windows 7 7057 to 7048.
You'll just get a Warning that the version is older than your current and that a device or two might not work --mine indicated the Motorola sm56 fax modem -- but I've got the driver for that anyway if I want to use it.
This leads creedence to the fact tha 7057 was "an Interim" build never intended for serious development use whereas build 7048 was actually part of the "True" development cycle.
Maybe my English might be mis-understood here -- I am NOT implying that build 7057 is a FAKE but just that it is a "testing" type build designed to check out certain parts of the process -- for example a lot of people experience longer install times before the Language menu comes up (perversly the better your gear the longer it takes to "start").
My advice would be that if you haven't installed 7057 don't bother --stay with 7048 until the next decent "leaked build" or the official RC1.
At least you won't have to look at the HIDEOUS logon screen.
I tried installing the upgrade build 7057 over 7000 (x86) and it seemed to work fine. But then Windows 7 boots into the message "preparing your desktop for first use". It follows the message "Setup will continue after restarting your computer" and after ca. 1 Minute it restarts and does exactly the same. I tried that for about 5 times and it keeps doing that. No error messages.
Did anybody have this problem as well? Any ideas for troubleshooting?
Addition: I have just seen that people have problems with Norton 360, which I have installed, too. Maybe I can boot into safemode and remove Norton - I will try this tonight and report.
I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta?
I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand Opening.
Is it possible that all the updates that I have received equally add up to the newer build?
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
I just finally finished building my first gaming rig, everything on it is great and really fast. However, the windows boot has now got a lot slower. In the "Starting Windows" screen (the black one where it shows the colorful windows symbol) it now sits there for about a minute. This morning and yesterday it only took 5-10 seconds. I just built it, installed drivers, windows, etc., yesterday. Once I finished with those, I made a backup image. I then loaded more programs and games on today.
Then I restarted my comp and found it took a lot longer to reboot. I restored it back to the image in case I put on a bad program or something, but it still boots slow. What causes a brand new computer with an SSD shouldn't take this long to boot. I also installed the drivers for the MOBO from the CD, and I couldn't find any firmware update for the SSD (the software Magician that came with it said there weren't any)
It's also Windows 7 Professional 64 bit. Here is my build: [URL]
So after I got my stuff all installed and things are working well, I hooked up my router to the new computer and the connection is significantly slower that it was before.
My computer will boot up to the windows startup logo, and just when it should load my desktop, it flashes a blue screen, and re-boots into recovery mode.
I just built a new computer using the new Intel 1155 socket CPU. As you may or may not know, all 1155 socket motherboards were recalled due to issues with the SATA ports. Long story short, I got a refund for my H-series Biostar motherboard, and when the revised motherboards were made available, i bought a P-series Asus motherboard. All of the system hardware is the same, accept the motherboard.
The computer was running fine with the H-series Biostar motherboard, but now that i have swapped for the Asus, i seem to be running into problems. My first instinct is that the leftover H-series motherboard driver is messing with my new P-series build, but i can't get to the control panel to remove it. I have found a way to pull up windows explorer when i boot into recovery mode. Is it possible for me to remove my old motherboard drivers through windows explorer, or will i need to gain access to the control panel?
Computer Details: CPU: Intel i5 LGA 1155 MOBO: Asus P8P67-LE Memory: G Skill 2*2GB Video Card: PNY GeForce 9800 GT PSU: Tried 380W and 650W, made no difference
I recently built a new pc and I'm having some issues with Windows 7 which seems to freeze on start up. By this I mean at the "Starting Windows" screen the animation will start but will freeze after a couple of seconds. It usually takes me about 3 restarts to then get into windows. I haven't been using Windows Repair tool because the restore deletes all of the programmes that I've put on and the crashing continues to happen despite the changes. I'll list my specs below:
Windows 7 Home Premium 64-bit ASRock Pro3 Gen3 Z68 Intel Core i5 2500k currently @ stock speed Gigabyte 560Ti OC OCZ ZS 550w 8GB DDR3 Crucial Ballistix 1600mhz Kingston HyperX 120gb SSD (Boot Drive) Western Digital 1TB Caviar Blue (Overflow Drive)
I don't think the SSD is the problem because when I did the install on the WD HDD I still had the instability and the crashes.The drivers I have installed are: Realtek LAN drivers, Nvidia 500 series Graphics, Nvidia HD Audio and all of the "Important" Windows 7 updates.
I just put together a brand new PC. I used the HDD from my old PC in this one, it has Windows 7 32bit installed on it.I start up the PC, everything sounds fine, I hear one beep, the BIOS screen pops up. Then, I get to the "Windows Error Recovery" screen. If I select start windows normally, I see the starting windows screen, then a blue screen pops up with the usual "problem has been detected...shut down to prevent damage" stuff. The technical information it gives me is: Quote :*** STOP: 0x0000007B (0x80D86A58, 0xc0000034, 0x00000000, 0x00000000)
I have a couple of questions pertaining to my new pc build that is being shipped to me. I am building a new computer using a Corsair Force GT 120gb SSD as my boot drive and a Seagate Barracuda 1tb drive for files and whatever else.When installing the SSD (my EVGA Z68 SLI has SATA 3) is there anything special I need to do? I assume there isn't, other than just plug it into the SATA 3 port and go. Now, once the computer is up and running, what must I do to get windows to install on it? I have read about changing from IDE to AHCI (not sure if my BIOS will have that or not but I will find out soon). Is there anything else? I also read that changing the boot priority to dvd rom first, SSD second, then the HDD third will help as well. Both drives are brand new so no partitions or anything, clean install. Second part, I bought the upgrade version of Windows 7 professional 64 bit and to install it, can I just pull out my old retail copy of Windows XP and install that first, then once it gets me to the desktop, reboot and do it all over again, this time installing the Windows 7 upgrade over it? In theory, I imagine this is how I would have to do it, but I am not positive so that is why I am inquiring.
I am building a new computer and my old one has windows xp on it. can i use the xp sticker on the old one to upgrade to windows 7 ultimate on the new one? if i use the old hard drive?
My brand new computer I just built is crashing and restarting without a reason I can find. My System health report won't be very accurate because I need to run OCCT stress test in the background to slow down the amount of times it crashes.
I have run memtest for 12 hours - No errors. My CPU is cooled by a H100 - temps never go above 40c even under load. CPU - i5 - 2500k MOBO - Gigabyte GA-Z68X-UD3H-B3 PSU - Antec 750w
Even on a fresh install it will crash during the setup phase, like where you put in product code and username. Leading me to think its a Hardware issue.
Can I use a Windows 7 Pro Upgrade DVD key to re-build my PC from scratch? I have Vista Business and want to get Windows 7 Pro but don't want to upgrade on top of. I want to format and install Win 7 Pro from scratch.
I want to upgrade my w.7 from build 7100 to 7264 but I have photoshop and other programs installed on build 7100 and I want to know if these program will still work without any problems after upgrading.
I am curently running Windows 7 Build 7127. Then I dowloaded Build 7600 (should be). Tried to install it, there was opytion to upgrade. But, when I click upgrade it said that no possibility for it. means that I shoul install cleanly.
Can i upgrade from the 7000 build to a new buld without losing any installed program/drivers or anything like that? Currently, i can't get my computer to boot properly and i want to change to a later build of windows 7 anyway, so i can do it just by upgrading?