I've upgraded windows 7 from build 7000 to build 7057 (totall reinstall not just upgraded). My pc is connected to the TV (for movies and such), when the computer boots both displays work fine. After logon however I cannot get the second display to work. I can expand them all I want but, it simply won't work.
View 1 RepliesThis is only occuring whilst using IE8, usually opening a new tab or clicking a link.....
Any ideas??
System spec is...
Processor: Intel Core2Duo T8300 (2.4Ghz) Chipset: Intel 965 Express (800Mhz FSB) (Inc: onboard 965 graphics) Memory: 2Gb OCZ PC2-6400 Network: Atheros AR5007EG (802.11g)
Is it possible to upgrade from 32 bit to 64 bit, I reckon the answer is no, due to the architecture change ?
Also if I was to change from 32 bit to 64 bit, what - In laymans terms - would I notice different?
All my hardware is fine, and I have 4gb RAM.
1. Is it Possible
2. Whats the Main Difference I will see.
Im running build 7057 on my Asus G50vt-X1 laptop and for some reason when I go to shutdown it will freeze on the shutdown background and not shut down. I'm not quite sure why. I have manually changed the logon and shutdown backgrounds via a regedit but it wouldn't complete the shutdown long before that. Any ideas?
View 4 Replies View RelatedIs this okay? Has anyone done this? I read some problems in general when upgrading one version of Windows 7 to another, but is this common?
View 9 Replies View RelatedDo any of creative's drivers work with this build? I can't seem to get any sound.
View 6 Replies View RelatedCan someone confirm that it's a general problem or have I just got a bad D/L.
If I try and UPGRADE from Windows 7 build 7048 X-64 to Build 7057 X-64 it starts OK but after a while (during the expanding files stage) I get error -- some necessary files for installation cannot be copied ??
Clean install seem to wok.
HA1 and checksums of my iso seem correct.
Actually upgrading from a beta to another beta is not a goood idea anyway but I want to make sure that I haven't got a bad D/L before I try an upgrade from a Vista installation.
when i right click "computer" and then choose "manage" i get the following error:
i went to the specified folder and the file opens OK from there.
also it's associated properly in the default programs control panel.
i must mention the i upgraded to this build from build 7000.
If you really dislike the pale blue logon screen with that ridiculous "Peace Dove" (ZAP it someone) please then GOOD news.
Stardocks LOGONSTUDIO works on both X-86 and x-64 versions of Windows 7 including build 7057 (which is the one with the hideous Dove on it and the pale blue insipid colour).
Whilst the supplied screens aren't very adventurous you can download others or "Roll your Own".
Maybe we should have a competition here -- It's a bit difficult to post the image as one hasn't logged in yet --so you can't capture the screen.
I might have a go by using a VM and then capturing the Virtual Machine image from the Host OS.
After I upgrade Windows 7 from build 7022 to 7057 my startup now is really slow. I see boost-screen 4 minutes. Restart was 405 sec. I removed unnecessary services, startup programs, defarg my registry, did a clean install, but nothing of that works.
View 4 Replies View RelatedWindows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
I have a desktop running Windows 7 Ultimate and a laptop running XP Pro. Is there any way to use the laptop as a second monitor? I know how to set it up physically but just don't know if the laptop has to be running the same OS or not.
View 2 Replies View Relatedis there a way to have a screen saver only on my 2nd monitor as i have it set up as extended display dual monitors?
View 1 Replies View RelatedJust got a 2nd monitor and was wondering if there is a way to make XP mode utilize dual displays? I use xp mode to log into a citrix server for work and it would be great to have my citrix be in dual display.
View 3 Replies View RelatedIs there something built into Windows 7 that will do a screen saver of a library of photos, yet use *both* displays to show multiple photos? There are a couple in there, but they only seem to work on the primary display. Is there a way to enable multiple displays for these?
I have a nice 3rd party app I purchased in the XP days that does this, but was wondering if there was a way to get 7 to do it natively.
I have an external monitor, actually a TV connected via S-Video cable coming out of the back of my video card. My TV is my second desktop. All of that is fine. The problem comes in when I log off or "switch users" (there are no other user profiles on my computer - I only log off or switch user to make sure the kids can't get on without my permission - they don't know my logon code), the TV loses the picture and goes grainy, but when I log back in, the TV does not "kick in" again. The only way to get the TV to display the second desktop after logging out or switching users seems to be to restart the computer entirely. If it reboots, it picks up the TV as second monitor again.
If you simply log in again, it does not pick up the TV as second monitor. Is this related to some setting that says the TV should only be the second monitor on the admin's account and not for "all users" or something? It is annoying to always be restarting my computer to watch a video on my TV. By the way, in all cases, the "Display" settings in control panel show the TV as the second monitor. But looking at the actual TV, all you see is a grainy screen that obviously is not being fed any clear signal.
i'm running a vaio vgn nr21s/s (nvidia 8400MGT) with a samsung syncmaster 226bw ( 22') connected by a vga connector and i cant have my max resolution (1680/1050@60htz) in Windows 7 x64
i tried a dozens of drivers, the new and the old ones (laptopvideo2go, dox moddified...) for Windows 7 x64 and for vista x64... and still the same problem, still stuck at 1600/1024
i thought it could be the vga connector but im running xp pro 32bits too and theres no problem with that i can get the right resolution.
I had a hard disc crash, installed a new disk, upgraded to Windows 7 and now my dual monitors display the same image where before the crash they did not.
View 2 Replies View RelatedI have an Nvidia 9600M GT on my laptop and driver 186.03
The problem is, there is no option in my Nvidia control panel to select whether I want the mouse to go to the external display via the left side of my screen or the right side. It always was on the right side, but suddenly its on the left.
Any ideas?
I have a dual head setup that works ok. My issue though is that whenever I do a reboot, I have to go into display resolution settings and re-enable "extend" displays.
Is there a way to make this persistent? It's just annoying doing a reboot and having to spend time re-organizing your desktop every time.
what inexpensive video card for dual display?
View 9 Replies View RelatedI have a strange problem with 2 displays connected to my ATI HD4770 Video Card running the latest 10.12 drivers and AMD Control Center.
I have 2 displays connected to the card.
The display 1 (Samsung Syncmaster 225BW) runs at 1680 x 1050 and is the Main display with the Windows 7 Start Menu.
The display 2 (Phillips Brillance 230W) runs at 1920 x 1200. Physically it is located on the left side of display one.
I arrange the display either by using the Display / Screen Resolution Control Panel Applet or the Catalyst Control Center Desktops & Displays Applet.
Both works fine (drag display 2 to the left side of display 1, chance resolution from 1680 x 1050 to 1920 x 1200.
But when I restart my machine, after the reboot has finished and the desktop appears, my display settings are exactly as before the reboot.
But when Catalyst Control Center loads, it switches the display and reduces the resolution of the bigger one to that of the smaller main display.
Every time I have to manually restore my custom display settings (Arrangement, different resolution) Is there someone in Windows 7 forum which is expert for ATI and CCC running multiple displays in handling those glitches?
Sometimes as an end mobile computing user, we may be too demanding especially when hoping to have a huge screen for multiple windows and applications running simultaneously but at the same time, we don’t want it to be too bulky for convenience when carrying along. However, with existing solution, we can’t go too far except relying on external LCD panel for display extension which is not always available.
Here is how the new innovative solution from gScreen that able to fill up the gap. Dubbed as Spacebook, it is claimed to be the first laptop model featured with dual 15.4-inch that can be slide out for display extension when necessarily. Read The Rest Here : GScreen Dual Display Spacebook Targets to Increase Productivity for Travelers » My Digital Life.
im running win 7 x86 in a vaio vgn nr 21s/s with a 8400mgt and i cant find a driver which displays my correct resolution in my external wide screen (22'' at 1680/1050)
all i cant get is 1600/1200 or above but not he optimal.
My dual screen has suddenly stopped working on my laptop. Now when I hit 'detect' my laptop screen goes black and I have to force restart the machine and disconnect the second laptop. Is this likely to be a hardware fault?
View 2 Replies View RelatedDisplay or video driver for Pentium dual core, provide a link..... Because of it the clarity of video is not good and I can't set a screensaver.
View 5 Replies View RelatedMy old monitor has problems turning on, I can leave it on for 30hrs before it decides to display a picture, or I can manipulate it by unplugging the DVI cable from the back, but sometimes even that takes a few tries. It's off warranty and for reference it's a Samsung SyncMaster 226BW.So I bought a new monitor and I have it plugged in using HDMI, but a problem I get is that when both monitors are plugged in the HDMI has no display until it gets to Windows, so I cannot see the boot process of my PC, because my old monitor as explained above has problems turning on. Was a hindrance today when I was tinkering with my SSD and had to go to BIOS, and frankly I'd like to be able to see in case anything goes wrong, like a BSOD or Windows update etc.
View 5 Replies View Relatedhow can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies View RelatedI know this is going to sound like a daft question but my father has a Radeon HD 3850 x2 from ASUS and it's a great card, but we're coming stuck about the actual display resolution of the card; it being a dual link I'm some what confused as to how you would go about calculating the actual maximum display resolution of the Dual Link ports to 2 SEPERATE monitors not to one! My father is planning on running two 22" at a display resolution of 1920x1080 at 60hz and the maximum display resolution of the Dual link ports is 2560x1600 at 85hz.. I'm not sure whether the card will run both at 1920x1080@60hz
View 2 Replies View RelatedMy current system was upgraded to windows 7 32bit from vista 32bit (I bought the windows 7 home premium upgrade disc when it was first released). I am going to build a complete new system. Can I install windows 7 64bit from the same windows 7 disc? Or do I have to buy a new windows 7 disc? Is there a way around buying a whole new disc?
View 1 Replies View RelatedI know that the Windows 7 Homegroups only work with other PC with homegroup.But I'm trying to find my other computers running XP with my windows 7 laptop.
View 9 Replies View Related