Just got a 2nd monitor and was wondering if there is a way to make XP mode utilize dual displays? I use xp mode to log into a citrix server for work and it would be great to have my citrix be in dual display.
View 3 Replies
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
I have a desktop running Windows 7 Ultimate and a laptop running XP Pro. Is there any way to use the laptop as a second monitor? I know how to set it up physically but just don't know if the laptop has to be running the same OS or not.
View 2 Replies View Relatedis there a way to have a screen saver only on my 2nd monitor as i have it set up as extended display dual monitors?
View 1 Replies View RelatedIs there something built into Windows 7 that will do a screen saver of a library of photos, yet use *both* displays to show multiple photos? There are a couple in there, but they only seem to work on the primary display. Is there a way to enable multiple displays for these?
I have a nice 3rd party app I purchased in the XP days that does this, but was wondering if there was a way to get 7 to do it natively.
I have an external monitor, actually a TV connected via S-Video cable coming out of the back of my video card. My TV is my second desktop. All of that is fine. The problem comes in when I log off or "switch users" (there are no other user profiles on my computer - I only log off or switch user to make sure the kids can't get on without my permission - they don't know my logon code), the TV loses the picture and goes grainy, but when I log back in, the TV does not "kick in" again. The only way to get the TV to display the second desktop after logging out or switching users seems to be to restart the computer entirely. If it reboots, it picks up the TV as second monitor again.
If you simply log in again, it does not pick up the TV as second monitor. Is this related to some setting that says the TV should only be the second monitor on the admin's account and not for "all users" or something? It is annoying to always be restarting my computer to watch a video on my TV. By the way, in all cases, the "Display" settings in control panel show the TV as the second monitor. But looking at the actual TV, all you see is a grainy screen that obviously is not being fed any clear signal.
i'm running a vaio vgn nr21s/s (nvidia 8400MGT) with a samsung syncmaster 226bw ( 22') connected by a vga connector and i cant have my max resolution (1680/1050@60htz) in Windows 7 x64
i tried a dozens of drivers, the new and the old ones (laptopvideo2go, dox moddified...) for Windows 7 x64 and for vista x64... and still the same problem, still stuck at 1600/1024
i thought it could be the vga connector but im running xp pro 32bits too and theres no problem with that i can get the right resolution.
I had a hard disc crash, installed a new disk, upgraded to Windows 7 and now my dual monitors display the same image where before the crash they did not.
View 2 Replies View RelatedI have an Nvidia 9600M GT on my laptop and driver 186.03
The problem is, there is no option in my Nvidia control panel to select whether I want the mouse to go to the external display via the left side of my screen or the right side. It always was on the right side, but suddenly its on the left.
Any ideas?
I have a dual head setup that works ok. My issue though is that whenever I do a reboot, I have to go into display resolution settings and re-enable "extend" displays.
Is there a way to make this persistent? It's just annoying doing a reboot and having to spend time re-organizing your desktop every time.
what inexpensive video card for dual display?
View 9 Replies View RelatedI've upgraded windows 7 from build 7000 to build 7057 (totall reinstall not just upgraded). My pc is connected to the TV (for movies and such), when the computer boots both displays work fine. After logon however I cannot get the second display to work. I can expand them all I want but, it simply won't work.
View 1 Replies View RelatedI recently built a new computer (specs below) and have been having intermittent issues upon power on/restart with my monitor displaying 'Cannot Display This Video Mode' and above that 'Optimum Resolution 1920x1200 60Hz'. I may have to power off/power on the computer one or two times before the computer loads completely to windows 7 login. Other times - the computer starts completely fine. As this is a fresh build (1 week old), I have loaded all the newest drivers from the appropriate websites.I have no problem playing any games in their highest settings (SWTOR, BF3, WOW, ETC.) and have no issues with anything once I can make it to the windows login. I have been reading forum after forum to find a solution to my problem without any luck. I read that unplugging the monitor may help the issue, and the last time it gave me that video mode message, I tried that - and it worked. I am running the monitor (DELL EF248WFP in 1920x1200 resolution, 60Hz) through the DVI connector on my MSI HD 7970.
ASUS P8P67 Deluxe
Intel I5-2500K
Corsair Vengeance (4x4GB)
MSI HD 7970
125GB SSD (Windows 7 - Boot Drive)
1TB Seagate Barracuda 7200RPM
Monitor: Dell E248WFP
I have a strange problem with 2 displays connected to my ATI HD4770 Video Card running the latest 10.12 drivers and AMD Control Center.
I have 2 displays connected to the card.
The display 1 (Samsung Syncmaster 225BW) runs at 1680 x 1050 and is the Main display with the Windows 7 Start Menu.
The display 2 (Phillips Brillance 230W) runs at 1920 x 1200. Physically it is located on the left side of display one.
I arrange the display either by using the Display / Screen Resolution Control Panel Applet or the Catalyst Control Center Desktops & Displays Applet.
Both works fine (drag display 2 to the left side of display 1, chance resolution from 1680 x 1050 to 1920 x 1200.
But when I restart my machine, after the reboot has finished and the desktop appears, my display settings are exactly as before the reboot.
But when Catalyst Control Center loads, it switches the display and reduces the resolution of the bigger one to that of the smaller main display.
Every time I have to manually restore my custom display settings (Arrangement, different resolution) Is there someone in Windows 7 forum which is expert for ATI and CCC running multiple displays in handling those glitches?
Sometimes as an end mobile computing user, we may be too demanding especially when hoping to have a huge screen for multiple windows and applications running simultaneously but at the same time, we don’t want it to be too bulky for convenience when carrying along. However, with existing solution, we can’t go too far except relying on external LCD panel for display extension which is not always available.
Here is how the new innovative solution from gScreen that able to fill up the gap. Dubbed as Spacebook, it is claimed to be the first laptop model featured with dual 15.4-inch that can be slide out for display extension when necessarily. Read The Rest Here : GScreen Dual Display Spacebook Targets to Increase Productivity for Travelers » My Digital Life.
im running win 7 x86 in a vaio vgn nr 21s/s with a 8400mgt and i cant find a driver which displays my correct resolution in my external wide screen (22'' at 1680/1050)
all i cant get is 1600/1200 or above but not he optimal.
My dual screen has suddenly stopped working on my laptop. Now when I hit 'detect' my laptop screen goes black and I have to force restart the machine and disconnect the second laptop. Is this likely to be a hardware fault?
View 2 Replies View RelatedDisplay or video driver for Pentium dual core, provide a link..... Because of it the clarity of video is not good and I can't set a screensaver.
View 5 Replies View RelatedI brough a Samsung notebook recently and found that it will go to sleep mode automatically when I close the display. I tried to change the action of closing display in the power settings, however, I found that the options are dimmed and I cannot change it. Could anyone teach me how can I change it? My notebook is Samsung RF710, windows7 home premium 64 bits
View 3 Replies View RelatedWhy don't my enhancements work in "skin mode"? In "now playing mode" it will display but it won't stay. If you click on the screen in "now playing mode" the enhancement block goes away. Is this normal for WMP12?
View 6 Replies View RelatedI just built a new computer and first couple boot ups everything worked fine, but when I tried it the next day I got "Cannot Display Video Mode"and then after the system reset itself the screen looks all messed up with these weird vertical yellow dotted lines. I've tried reinstalling the drivers nothing works. System says Error 43 and it stopped the video card. There is no integrated video on my motherboard. After installing drivers it does the same thing before, I have tried doing clean installs.
View 4 Replies View RelatedI have been adjusting my DRAM timings in the BIOS and lose the ability to reboot onto Windows 7 64-bit. So, I power down and reboot and I get a black/blank screen and 2 beeps from the MB. So, I turn off my computer and I have to remove my Graphics card to access the OS again. Can anyone suggest an option or two that will help me restore to SLI mode?
View 8 Replies View RelatedMy old monitor has problems turning on, I can leave it on for 30hrs before it decides to display a picture, or I can manipulate it by unplugging the DVI cable from the back, but sometimes even that takes a few tries. It's off warranty and for reference it's a Samsung SyncMaster 226BW.So I bought a new monitor and I have it plugged in using HDMI, but a problem I get is that when both monitors are plugged in the HDMI has no display until it gets to Windows, so I cannot see the boot process of my PC, because my old monitor as explained above has problems turning on. Was a hindrance today when I was tinkering with my SSD and had to go to BIOS, and frankly I'd like to be able to see in case anything goes wrong, like a BSOD or Windows update etc.
View 5 Replies View Relatedhow can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies View RelatedI'm having a problem with my display, it's showing as if it were in safe mode, with the icons stretched out. However, it's not in safe mode I have started it in normal mode. The resolution is showing as 1024 x 768.
View 5 Replies View RelatedJust recently was doing some additional overclocking on my PC and had this happening just now. Whenever I resume my session out of sleep mode by hitting either a key on my keyboard or mouse, my PC fires up, but the display doesn't come back, almost as if I had pulled out the cable from the monitor. The PC is running normally as this is going on, and the only way for me to get my display back is to do a hard reset.
View 3 Replies View RelatedI know this is going to sound like a daft question but my father has a Radeon HD 3850 x2 from ASUS and it's a great card, but we're coming stuck about the actual display resolution of the card; it being a dual link I'm some what confused as to how you would go about calculating the actual maximum display resolution of the Dual Link ports to 2 SEPERATE monitors not to one! My father is planning on running two 22" at a display resolution of 1920x1080 at 60hz and the maximum display resolution of the Dual link ports is 2560x1600 at 85hz.. I'm not sure whether the card will run both at 1920x1080@60hz
View 2 Replies View RelatedI have just installed win 7 and got the dual boot with windows Xp, which I already had. now I want to do safe mode of windows Xp tapping the F8 during the boot, but nothing happens....no safe mode at all. What happened ???
I cannot rich the safe mode even in win 7. I don`t know why ???
I've got some minor problems but still I find them quite annoying.
First: When I'm running Win 7 my display is flickering. It just looks like bad reception on a TV station. When it gets too bad the display turns blak and after a second everything is fine and it starts all over again.
Second: After a while Windows states that there is a problem with the Nvidia windows kernel mode driver, version 186.81 and that it has been restored. (This info is given after the screen turns black).
I think that there is a connection between those two problems but I don't know how to solve it.
I've got a nVidia Geforce 9650m GT grafics card and after I installed win 7 downloaded and installed the driver.
It is even worse when aero is running.
In Vista everything was fine.
I'm having a problem with my notebook. It keeps turning display off after idle for 2 or 3 minutes and going into sleep mode around five minutes after that. I did change and set power system in control panel many times but it did not work. I'm running on Window 7 home basic 64 bit.
View 2 Replies View RelatedHow do I revert back to the standard windows 7 display mode? It's driving me crazy - is there any way to prevent this from happening?
View 2 Replies View Related
