Software Installation Fails Because Of Missing MSXML4
Oct 28, 2011
The thing is I have installed the latest update to MSXML4 SP3 - in fact WU did it for me, but there is no MSXML4.dll in Windows/System32. 3 and 6 are there OK.I can't figure out why this is as I haven't done any registry cleaning.Tried sfc /scannow, it finishes OK but it says some files are corrupted.This is my spare Windows 7 Ultimate SP1 on Disk 1 partition 1 - in other words the 4th in a row of multi-boots with the boot files residing in Vista on C: (It goes C:, D:, then on the next disk L: and M:Dare I stick a Win 7 SP1 installation disk in and do an upgrade/repair install? Will that lose me my mutli-boot? I checked both my Windows 7 installations on my main PC and the one on my Netbook and neither one carries it. Neither do any of my Vista installations. But they all have the MSXML 4 SDK installed by Windows Update - but that installs into Program Files (x86) not the Systemroot.Perhaps there is a glitch in the installer as it seems to be thinking everyone has XP, as it has all - MSXML2,3, 4, and 6 DLL's in that exact location.
View 1 Replies
ADVERTISEMENT
Sep 29, 2010
I have a netbook that came with the starter edition. I am trying to install the pro edition over it. The install dies and tells me I cannot install it and I need to select Windows Anytime Upgrade instead. However, that will not accept my license key from my pro edition. Am I stuck with a disk I cannot use now?One of the install choices was to do a clean install and lose all of my files, applications, and settings. Is that my only choice?
View 6 Replies
View Related
Jun 8, 2011
I'm back with another issue. I'm setting up a PC for recording TV and it needs Windows 7 or Vista as the OS (since they come pre-installed with Media Center). This is the PC.The specs are also included: Shuttle XPC Barebone.It contains 2GB DDR2 ram and a 500GB Seagate HDD.During the windows installation (either Windows 7 or Vista) three things can, happen,-When the disc boots up, the GUI of the installation freezes and hangs. indefinitely.-When windows begins to install and expand the files, the PC will reboot randomly.-During install, the screen will go black with only a few red pixels present.*This happens with both 32/64bit installations.I tried putting in a different video card to see if that was the issue, but no dice. Also, I know this system can run windows vista/7 because my father is using the same exact PC model (SN68SG2) and is running Vista ultimate 32bit just fine.I have already diagnosed the RAM and HDD and they are in working order.For some reason, the only OS that installs without issues is XP. Worse case scenario, I can get XP media center edition, but I'd have to obtain a disc or iso to even test it out.
View 9 Replies
View Related
Feb 20, 2012
i try for 3 days to install Windows7 on my OSZ Vertex SSD. As installationsource i use a usb disk.The Setup starts fastly withput andy problems, but hang at expanding files(70%-90%). I tested the setup with my old sata hdd and the installation passes without any problems.
View 2 Replies
View Related
Aug 23, 2012
my Windows 7 Ultimate Installation is hanging an "Expanding Files".. But wait, I don't think its a Windows issue. I have read and read some more on how to fix this and have tried (1) to change the SATA ports on the drives, both HD and DVD-ROM (2) to change hard-drives (both new) (3) to switch out 3 different DVD drives to ensure the drive wasn't failing (4) to check the BIOS settings (5) to remove the bios battery and hold down the power button the erase the CMOS Memory (6) to use different OS Discs (7) to use completely different operating systems- Windows 7, Windows XP, Linux, ReactOS (8) to remove memory and swap with memory that I know is good.The ultimate object is to successfully install Windows 7 on this machine; but with all of the above being done and it still hanging on "Expanding Windows Files" and getting stuck to the point that I cannot move my mouse, I am unsure of what to do at this point.
View 4 Replies
View Related
Sep 13, 2012
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies
View Related
Dec 7, 2009
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive.
It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems.
Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems.
View 2 Replies
View Related
Jan 13, 2013
My windows 7 fails on my pc after successful installation, and also successful installation of drivers.How it goes :1. I set up windows 7 from USB. I clean format the entire hard disk.2. Windows successfully installed. Works great. 3. Install drivers. All successful. Works great. Restart after the driver is being installed.Successful.4. Works fine on day 1.5. Next day when I start, windows starts drive C: for disk check consistency. After checking the windows fails.6.Starts automatic repair and fails to do so. Nothing works."Automatic repair cannot repair your computerThis is what keeps on going on since the past last week. I kept automatic updates off. I even removed the RAM and the cell and motherboard and fitted it again
View 11 Replies
View Related
Apr 5, 2011
It fails on "Expanding Windows Files" (Or something like that) with a clean install.The error I'm getting is:Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x0070017.
View 4 Replies
View Related
Mar 10, 2011
i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
View 6 Replies
View Related
Jul 24, 2010
This issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies
View Related
Aug 2, 2010
I am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
View 9 Replies
View Related
Jun 24, 2012
I'm trying to repair my Windows 7 ultimate installation. When the procedure reaches its final step, I keep getting a message that the repair failed and that my system is being restored to its former state.Is there a way to depict the cause of this failure? Does Windows 7 keep a log? Is it accessible?Do you know of any other method to overcome this obstacle?
View 8 Replies
View Related
Jul 4, 2012
So, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
View 9 Replies
View Related
Oct 9, 2009
sql server installation fails on windows 7.
View 9 Replies
View Related
Apr 27, 2010
During expansion of Windows files the upgrade aborts with 'device driver missing' - no other info is displayed. Had upgraded all my drivers before commencing the upgrade.
View 5 Replies
View Related
Feb 9, 2010
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive
using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
View 9 Replies
View Related
Dec 9, 2010
The notorious (or at least I think it is,) "Copying-files-phase-instantly-cuts-to-100%-then-gets-stuck-at-expanding-files-0%-and-fails-after-some-time" bug.I'm almost to the point of challenging my computer fist to a fist-fight.The story: I ordered my Gateway M285-E Monday, and I just got it today. I was so happy to see that it already had Windows XP Tablet Edition installed. Of course, I'm one of those "f*** that noise" kind of people. I formatted the hard-drive from the Windows 7 installer, and upon starting the actual installation process, "Copying Files" jumped to 100%, and went directly to Expanding Files......which hung at 0%, until it gave me the usual error telling me that the needed installation files couldn't be found / located etc.
So I thought, why not install Windows XP? Didn't work either. The installer wouldn't recognize the hard-drive. Wonderful. So I sat in angst, staring at the beautiful machine that had just ruined my day....I installed Ubuntu 10.10; worked fine. Absolutely flawless.I CANNOT install ANY version of Windows. It just seems impossible. Windows 7: Failed.Windows XP: Failed.Windows ME (I was desperate):Failed.And after formatting again, Ubuntu 10.10:Worked.System specs:Core Duo @1.86ghz1gb RAM (soon to be 2gb)60gb HDDATi Radeon x1400 graphics
View 1 Replies
View Related
Sep 2, 2011
1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
View 1 Replies
View Related
Oct 29, 2011
I'm doing a new OS install, using my the same Windows 7 64 install disk as before. I do have new drives, but they are just newer versions of my old drives (which died) - and they are pretty standard HP slim drives.
For some reason, the OS install will not complete. It's saying that an optical drive driver is missing, and wants me to install it manually.
these drives did NOT come with any driver cd, nor is there a driver available on the HP support site. They must be plug&play.
View 4 Replies
View Related
Mar 18, 2012
Laptop configuration:
Windows 7 64 bit Professional
Linux 11.04 (dual boot)
i7, 2Gb RAM.
The computer has been running fine for the last year. I am giving the series of events below:(Please note that linux is still running fine, so this cant be a hardware problem)##Today, when I started my laptop, it failed to start. It showed no error, its just that after the windows logo comes, it froze in a black screen with mouse cursor visible.###I forced restart, and then it gave me the option to repair, because windows was unable to start. ###I chose repair, and the repair program started "detecting problems". Then it gave me the option to either do a system restore or cancel. I chose system restore. ###I let it run for 3 hrs., but it seemed to make no progress, so I forced restart. (It didnt let me cancel also, said that current recovery process cannot be canceled)###I tried to enter safe mode this time, and was successful. I went to system restore, where it showed me an option to restore to an older point where I hadnt uninstalled a game (Assassin's creed Revelations)### For some reason, I didnt restore the system. I thought that maybe all this was a temporary problem. So I restarted normally, and tried starting windows the normal way. It failed. After the windows logo comes, there is a black screen with mouse pointer for a few seconds, then it automatically restarts. (this is what happened then, and also happens now)### I tried entering safe mode, but failed. Same thing started happening in safe mode also. Even though I opened safe mode successfully just a while ago.### I tried many times to start windows in safe mode and all its variants, but to no avail.### I tried many times with the startup repair option, but also to no avail. It always seemed that it would go on forever.
I dont have the windows 7 installation Cd or even the recovery CD. (how bad is that?). So I borrowed a recovery CD from a friend, who also has windows 7 64 bit, and booted from it. It said that the driver windows/system32/driver/isapnp.sys was missing or corrupt. It says that I need the installation CD and select repair. But I dont have the installation CD from which my windows was installed. I have two questions:
1. If I somehow ask around and get someone else's windows 7 64 bit installation disk, will it work? (Someone else's disk, from which my windows was not installed). I dont need to put in the key or something, do I? I dont even know the key. The laptop came with windows installed and everything.
2. Can I simply replace the file isapnp.sys in windows/system32/drivers folder through linux? I asked my friend to give me his isapnp.sys file (which was of the same size as mine, he also ran win7 64 bit). Replaced it, but it doesnt work. Is there some other place I should replace it too, or this method is not supposed to work?
View 16 Replies
View Related
Dec 20, 2011
Zebra barcode code printer s600 there is no usb port,iam using usb to serial converter,PL-2303 USB-to-Serial Adapter is already installed,in windows 7 64 bit pc.In the device manager we can see in ports prolific usb to serial to serial comm port 2 is installed correctly,but when i start installing the printer driver the USB virtual port is not available for installing the driver,is it possible to install printer by usb to serial cable,please give some valuable comments.
View 3 Replies
View Related
Mar 28, 2012
My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies
View Related
May 11, 2012
I am trying to install windows, i have burned iso and all is good when booting from cd but there is some weird message about drivers what to do
View 9 Replies
View Related
Dec 11, 2012
during OS installation missing BOOT MGR... so what can i do.....
View 1 Replies
View Related
May 9, 2009
I got an installation disk that actually has files on it and show up on my computer but I have a new problem now in which an error shows up saying that some of the neccesary files are not being found which is really unfortunate. The error code I am getting is:Ox80070017
View 8 Replies
View Related
Aug 1, 2011
While installing Windows 7 on a fresh formatted disk, I am getting this msg all the time. The installation disk wont boot. I can't access anything. No repair... Nothing. I've tried also my old windows XP disk to get it to boot, but same error msg... BOOTMGR missing...
View 3 Replies
View Related
Jun 20, 2010
1.I start installing a fresh copy of Win 7.2.At the point of installation which concerns partitions I delete my 2 old ones (had 2 partitions on 1 HDD) and create 2 new ones.3.I continue installation on the smaller partition (just for the OS purpose)
4.All done perfectly with installation.5.When I go to My Computer I am only showing drive C: (the smaller OS partition) and I don't see the second partition at all.
View 3 Replies
View Related
Nov 14, 2011
I'm trying to install win7 from a usb (created from windows 7 usb dvd download tool) onto a formatted drive. I keep getting ''NTLDR is missing press ctrl + alt + delete to restart'' on my screen. Every 'solution' i've come across so far requires me to have some sort of boot disk or a previous version of windows on the drive. neither of which I have.
View 1 Replies
View Related
Feb 26, 2011
I have run the Windows 7 Compatibility Upgrade Advisor on my Vaio VGN-FZ190. I am getting that two drivers are not compatible with Windows 7:
1) The Nvidia GeForce 8400M GT has the latest that Sony publishes on its support web page for my laptop (Ver. 7.15.11.6760), dated 1/11/2008. On the Nvidia web site, it says that to get updates for my laptop "you must contact your computer vendor", so no updates are available there. Sony does not provide a newer Nvidia driver either.
2) The "Bluetooh Stack for Windows by Toshiba" Ver. 5.00.00. This is the most current driver that Sony publishes for this laptop model on the Vaio support web site.
I don't want to embark on the Windows 7 upgrade until I know I won't run into any critical issues that could lead me to who knows where.
View 1 Replies
View Related
Nov 7, 2012
I purchased a vizio all in one desktop model CA24-A2 , with windows 7 installed. I upgraded it to windows 8, but decided to return back to windows 7 because the Metro UI always crashes on me. I purchased a windows 7 disc and booted the computer off the disc. When the installation asks which drive to install it to, nothing appears. For some reason, the installation disc is not reading the drives. I've checked vizio's page, but didn't find any drivers for the hard drive that would work. I check the Bios menu and both drives appear. I've read on other forum about changing the bios mode (AHCI,IDE), but my bios menu is very restricted, and i dont have that option available. I used MiniTool Partition wizard on a bootable cd, and it was able to see my hard drives as well. I added some pictures below. When i try to boot windows with windows 8, "bootmgr is missing" error appears. After restarting my computer several times it seems i only have access to the bios menu f2, and not f8 for recovery.
View 4 Replies
View Related