I'm trying to install win7 from a usb (created from windows 7 usb dvd download tool) onto a formatted drive. I keep getting ''NTLDR is missing press ctrl + alt + delete to restart'' on my screen. Every 'solution' i've come across so far requires me to have some sort of boot disk or a previous version of windows on the drive. neither of which I have.
View 1 RepliesI have 3 physical hard drives, we'll call them A, B, and C. Hard Drive A has a partition for Windows 7, a NTFS partition for storage, a EXT3 (Linux), and swap (Linux). Hard Drive B has 1 NTFS for storage. Hard Drive C has 1 NTFS for storage. I am trying to replace Hard Drive B (with nothing related to Windows 7 on it) and when I try to boot into Windows with my new blank drive installed I get "NTLDR is missing." From what I've read NTLDR was only used up to Windows XP. The drive I am trying to remove isn't even associated with Windows 7 anyway. When I put Drive B back in everything works fine again. why I cant remove drive B even though it has nothing to do with the physical or logical drive containing Windows 7?
View 4 Replies View Relatedput together my barebones system, installed Windows 7, and everything was great.Then Iinstalled Sony Vegas 10. The next time I tried to boot up, I got several BSODs and couldn't boot in any mode. Everything was not so great.After trying a few things, I formatted the HD in the hopes of starting fresh.Upon first bootup, I got a message saying that "NTLDR is missing."I've tried using the boot CD & USB method described [URL]but it hangs up in a DOS-looking screen on a line that says "[0.762735][<c01034a7>] kernel_thread_helper+0x7/0x10"So that's where I am right now.
View 14 Replies View RelatedSo I recently upgraded from windows xp to windows7, I went about installing well the wrong way. I Installed windows 7 from the downloaded file onto a empty hard drive I had attached to my computer. I did this all while xp was still running. Anyway it worked and windows 7 always booted up and worked just fine. But NOW!! I removed the attached hard drive where xp was installed and I try to use win 7 but it says NTLDR is missing at startup
View 7 Replies View RelatedHad a dual-boot system (Win 7 on drive 1, XP on drive 2) installed. Got an NTLDR is missing error on the primary WD drive on which Win 7 was installed. XP wouldn't boot either because the MBR is on the primary drive. So, I had to reinstall XP and all the software on the 2nd drive and test in original and another computer. Worked fine. When plugged into the motherboard, the Win 7 eSATA drive is not recognized by either of the 2 computers in the BIOS. It won't boot and I can't even look at the drive to see the contents - it's a non-entity as far as Windows is concerned. I plugged it into a Mac with an external eSATA to USB adapter and the Mac saw the drive but said that it was unreadable and asked if I wanted to format the drive. Since I thought I might want to try to recover files, I didn't. Anyway to see the contents of this drive with Windows and recover them or does it seem to be dead from the description?
View 1 Replies View RelatedI've just recieved Windows 7 Ultimate but when I try and boot it from the CD it comes up with the error message'NTLDR is missing press ctrl alt del to restart'.The confusing part of this is that I've not yet installed the OS, this is after I select which drive to boot from, but before the Install page comes up.I've also tried installing from my current Windows XP OS, but when I do so it comes up with the error code 0x80070490 ~ which means it can't 'Find a location to store temporary installation files.'[code] It's not a matter of me burning a bad .iso file as I bought the DVDs whole from Microsoft, so I neither downloaded or burnt them.
View 9 Replies View RelatedI installed Windows 7 again after a couple months on XP, and I was just getting everything moved and copied from my secondary hard drive which stores my Acronis backups, and all of my data.The last thing I did was install Acronis, which wanted me to restart my PC. No problem, it worked just fine. Made a backup, and turned on Acronis Startup Recovery Manager (ASRM)... Everything worked perfect until I restarted for some reason, I don't remember what it was... I got NTLDR Is Missing, press Alt+Ctrl+Del to restart So I did, and it came up again, and couldn't find a way to fix it...Even trying to use "fixmbr" from a Win2000 disc's console didn't work, which usually, it fixes things like that.... I set it down for the night...Woke up, and had the strange idea of unplugging and removing the hard drive that contains my data files and Acronis Secure Zone.... And wow, It worked...how can I plug my hard drive back in and be able to boot up? Remove Acronis? Turn off ASRM?
View 3 Replies View RelatedI have used wintoflash to make a bootable usb to install win 7 but when I restart the pc to begin the installation I received the messege ntldr is missing
View 1 Replies View RelatedI have two disks 0 & 1 in my PC & each has two partitions. I had first installed Win xp on 1st Partition of Disk1 & checked the system is running perfectly. Afterwards I installed Win7 on 1st Partition of Disk 0 & checked the system booting/working in Win7 perfectly but now I can't acces my Winxp. Whenever I try to boot from Disk 1 it gives a message "NTDLR missing".
View 3 Replies View Relatedi prepared a boot-able win 7 dvd, but while booting NTLDR file is missing is shown.
View 3 Replies View RelatedComputer wont start ntldr is missing
View 6 Replies View RelatedI used Active @ KillDisk to wipe the hard drive completely clean on a machine that was running Windows 7. After ejecting the Active @ disc, I restarted the machine with the Windows 7 disc in the cd/dvd drive, after already having changed the boot order to boot from the cd/dvd drive, and recieved the infamous "NTLDR is missing Press CNTRL + ALT + DEL" message.
I've tried multiple Windows discs (Xp, Vista, AND 7) to no avail. Still receiving the same error message. I can't even get to the stage of being able to run the Windows repair.
I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.
View 4 Replies View RelatedWell, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP
View 3 Replies View RelatedI want to install Windows 7 home premium and got the ISO done with windows 7 usb download tool and unetbootin. When i try booting the USB i get "ntdlr is missing or corrupt press ctrl alt delete to restart"
I swiped the whole HD so there is no current partition on it. The usb is new and fat32 formatted with the 3GB windows 7 iso imgage on it..
I just installed Windows 7 and everything seems fine so far.
The issue came when I reboot the machine where it stopped with the error "NTLDR is missing". Strange is it can boot up just fine if I put the Windows 7 installation DVD in the optical drive, even if the boot up was set to HDD as first in BIOS. Without the dvd in the drive, the boot up will stop again with "NTLDR is missing".
Tried the Startup Repair and some others but to no avail.
Iam trying to do a clean install of win 7 64 bit, onto a an ntfs re formattted hard drive. The bios is configured to boot up on cd drive. But all that happend is that i get the message "NTLDR is missing".
View 4 Replies View RelatedComputer Specs:
CPU: I5-2400
MB: Asus Pz868
Ram: Corsair 8GB Vengeance LP
Using on board VIdeo For now
Maxtor HD Sata
WD Raptor Sata
HP Lightscribe DVD-r Drive Sata
Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select proper boot device, and now it states ntldr is missing. From what I have been reading it seems as if my partition with my windows 7 install is not set active. I do not have my windows 7 DVD only my old vista DVD. I tried to boot into it to make use of CMD and attempt to make my partition active but I was unsuccessful to even get into CMD. I went into bios and forced booted from the drive with the OS and still same error, also I attempted to disable the other sata and run the computer again with no success also. Look forward to hearing from someone soon. I will be sitting by my laptop all night until this computer gets running.
While installing Windows 7 on a fresh formatted disk, I am getting this msg all the time. The installation disk wont boot. I can't access anything. No repair... Nothing. I've tried also my old windows XP disk to get it to boot, but same error msg... BOOTMGR missing...
View 3 Replies View Related1.I start installing a fresh copy of Win 7.2.At the point of installation which concerns partitions I delete my 2 old ones (had 2 partitions on 1 HDD) and create 2 new ones.3.I continue installation on the smaller partition (just for the OS purpose)
4.All done perfectly with installation.5.When I go to My Computer I am only showing drive C: (the smaller OS partition) and I don't see the second partition at all.
I have run the Windows 7 Compatibility Upgrade Advisor on my Vaio VGN-FZ190. I am getting that two drivers are not compatible with Windows 7:
1) The Nvidia GeForce 8400M GT has the latest that Sony publishes on its support web page for my laptop (Ver. 7.15.11.6760), dated 1/11/2008. On the Nvidia web site, it says that to get updates for my laptop "you must contact your computer vendor", so no updates are available there. Sony does not provide a newer Nvidia driver either.
2) The "Bluetooh Stack for Windows by Toshiba" Ver. 5.00.00. This is the most current driver that Sony publishes for this laptop model on the Vaio support web site.
I don't want to embark on the Windows 7 upgrade until I know I won't run into any critical issues that could lead me to who knows where.
I've had a problem with my computer booting up ever since I did a clean reformat.Whenever I turn on my computer, it goes to the black screen and says the default, "Bootmgr is missing, press ctrl alt delete to restart, blah blah blah".The only way to get it to work is I have to press F12, and select my HDD and pressenter twice. It then successfully loads and such and does fine from that point on.Problem is, it's kind of annoying and I want to rid of it.I'm currently at work, but when I get home I'll be more than happy to take some screenshots and stuff if th
View 14 Replies View RelatedI'm an IT proffesional, currently going learning for my Configuring Windows 7.I used windows 7 since the first beta came out, and I must say, I never was dissapointed by it.But because I am learning I am trying to get all the computers here running windows 7, and I have a computer in my office wich I am trying to install it on.There are a few problems thoug:The computer only has a CDrom player, and cannot boot from a usb device.When I first got it, windows XP was installed, and it only had 750 mb of memory. Stupid as I was, I decided to give it a try anyway installing windows 7 from inside Windows XP using an external DVD player connected with USB.This failed, and gave me lots of error so I tried the next step.
As It cannot find a network share I had to instal windows PE on a CDrom and from there I could acces my extrernal HDD where I had a clean copy of windows 7 on as INSTALL.wim. I cleaned everything, and created everything from scratch with succes. Image X worked, and BCDboot worked. So it seemed to go great.After restarting my system, it still will only give me, Missing operating system.I tried to search on the internet but couldn't really find something related to my problem.In the bios it says I can start from IDE CD-rom device, Diskette drive, Hard-Disk Drive c:, Integrated NIC (Disabled)I bought some different memory and I am now at 1.5 mb DDRIt is an Intel Pentium 4 processor 2.4 Ghz Level Cachge 512 Integrated.It's a DELL Optiplex Gx260 Series.
The boot menu gives me:. Normal2. Hard-Disk Drive C: (Wich I used for my 100mb) (And I used D for my big partition and with BCDboot I used D:WindowsSystem32cdboot d:windows /s D: ) Wich worked because he did copy the files.
A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies View Relatedi tryed reinstalling windows 7 and now when i turn it on no matter what sorces i use (usb or cd/dvd) it wont load the windows 7 disk to repair or install im stopped at BOOTMGR is missing press ctrl+alt+del to restart i pressed f2 to make it boot from cd and usb first and pressed f12 to try and boot directly but nether work?
View 2 Replies View RelatedI am trying to install windows, i have burned iso and all is good when booting from cd but there is some weird message about drivers what to do
View 9 Replies View Relatedduring OS installation missing BOOT MGR... so what can i do.....
View 1 Replies View Relatedwhere are the ntldr, boot.ini files located in windows 7, and windows vista? if there are no boot ini, where is the boot loader found in the c drive? do not need to know about bcdedit. i just need to know location of the ntldr file of windows 7 and vista. or any other files related to boot loading and startup.
View 7 Replies View RelatedI got an installation disk that actually has files on it and show up on my computer but I have a new problem now in which an error shows up saying that some of the neccesary files are not being found which is really unfortunate. The error code I am getting is:Ox80070017
View 8 Replies View RelatedI purchased a vizio all in one desktop model CA24-A2 , with windows 7 installed. I upgraded it to windows 8, but decided to return back to windows 7 because the Metro UI always crashes on me. I purchased a windows 7 disc and booted the computer off the disc. When the installation asks which drive to install it to, nothing appears. For some reason, the installation disc is not reading the drives. I've checked vizio's page, but didn't find any drivers for the hard drive that would work. I check the Bios menu and both drives appear. I've read on other forum about changing the bios mode (AHCI,IDE), but my bios menu is very restricted, and i dont have that option available. I used MiniTool Partition wizard on a bootable cd, and it was able to see my hard drives as well. I added some pictures below. When i try to boot windows with windows 8, "bootmgr is missing" error appears. After restarting my computer several times it seems i only have access to the bios menu f2, and not f8 for recovery.
View 4 Replies View RelatedBasically I put a new hard drive into my laptop and tried to install windows 7. It keeps saying bootmgr is missing, press ctrl + alt + del to restart. The OEM windows 7 disk is inside my cd-rom drive and I went to the bios and put the cd/dvd as first, and the hdd as second, pressed f10 (save and exit.) and still no luck.
View 3 Replies View Related