Created New Partition And Made It Primary - NTLDR Missing On Boot Up

Aug 31, 2010

I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.

View 4 Replies


ADVERTISEMENT

Ntldr Is Missing Boot From Usb

Feb 13, 2012

I have used wintoflash to make a bootable usb to install win 7 but when I restart the pc to begin the installation I received the messege ntldr is missing

View 1 Replies View Related

Ntldr Is Missing In Dual Boot Xp?

Mar 1, 2012

I have two disks 0 & 1 in my PC & each has two partitions. I had first installed Win xp on 1st Partition of Disk1 & checked the system is running perfectly. Afterwards I installed Win7 on 1st Partition of Disk 0 & checked the system booting/working in Win7 perfectly but now I can't acces my Winxp. Whenever I try to boot from Disk 1 it gives a message "NTDLR missing".

View 3 Replies View Related

Windows 7 Wont Boot, Says NTLDR Is Missing On Startup?

Dec 3, 2012

So I recently upgraded from windows xp to windows7, I went about installing well the wrong way. I Installed windows 7 from the downloaded file onto a empty hard drive I had attached to my computer. I did this all while xp was still running. Anyway it worked and windows 7 always booted up and worked just fine. But NOW!! I removed the attached hard drive where xp was installed and I try to use win 7 but it says NTLDR is missing at startup

View 7 Replies View Related

Remove The PATA, Change The Boot Order From It To The SSD - NTLDR Missing?

Mar 11, 2012

Well, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP

View 3 Replies View Related

How To Recover A Primary Boot Partition ?

May 27, 2009

I have Windows XP64 and XP 2005 installed on adjacent partitions on an 80 GB IDE hard drive. I had been accustomed to using BIOS to choose the drive and EasyBCD to choose the OS. A few days ago I was unable to boot into this drive because I kept getting the error "NTLDR missing (press Ctrl-Alt-Del)." I tried using Microsoft's BCSetup2 (I think that's what it's called) but couldn't get a floppy disk to boot.

Being that there wasn't much on this hard drive, other than the Windows OS's, I decided to reinstall the Win64 on the first partition. I find now that EasyBCD does not install on my XP64, so evidently I must have had it installed on the XP MCE partition. I'm wondering now how I can go about accessing the MCE on that other partition, or finding or remaking the boot loader.

View 3 Replies View Related

Partitioning - Created A Partition And Can't Boot

Oct 20, 2009

I put a clean install of Win 7 onto my laptop and all was well. I went into disk management and shrunk my C: partition a bit to create a new partition.

Having done that, I now cannot boot up. It would seem that something I've done has caused the system reserved partition to become my C: drive and what was C: is now D:! Windows 7 attempts a repair when I boot up, but this fails due to a corrupt registry.

I've put the disk back in to see what that offers and it's here that I noticed that Windows is now on the D: drive. Opening a command prompt confirms how the drive letters have been reassigned.

I'm not 100% sure but assume that it's trying to boot from the system reserved partition and not liking it? I only just installed yesterday so don't mind doing a reinstall if that's the easiest fix, but just wonder if anyone knows what I can do to ensure this doesn't happen again? I presume my partitioning shenanigans are to blame somehow?

View 2 Replies View Related

Format Primary Dual Boot Partition?

Sep 26, 2010

Can i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work

View 1 Replies View Related

Set Blank Partition To Active Primary On Accident, Now Won't Boot?

Jun 7, 2012

I just bought a cheap laptop from Walmart yesterday with windows 7. I am not a fan of it so I wanted to see if I could dual boot windows xp. Luckly it is a IDE machine not sata. So I Downloaded a copy of windows xp (I have a license key for all the people who would shun me for it, it is paid for). Well when I was making a new partition to install windows xp on I set the new partition to active, rebooted and wala, my computer won't boot because I'm a bone head sometimes. I have access to another windows 7 comp that is Extremly slow and I put emphasis on Extremly

View 4 Replies View Related

Delete Dual Boot Ubuntu Partition And Convert To Primary Hard Drive C:?

Mar 14, 2012

I installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.

View 3 Replies View Related

Boot / Crash Dump And Primary Partition - System Recovery Option Incompatible

Jul 22, 2012

I have a brand new Windows 7 64bit build with a clean install from an Upgrade CD and noticed in BIOS that my 1st boot device must be "Windows Boot Manager" or it asks for the CD. I only have 1 storage device (SSD) in the system and when I look under Disk Management in windows, it shows a 100MB "EFI System Partition" in addition to the primary partition (which is labeled "Boot, Crash Dump, and Primary Partition" - so it seems to have the boot files on it).

My components are:
Intel i5 3570K
Gigabyte Z77-DS3H mainboard
16GB Crucial Ballistix
Intel 520 180GB SSD
LG BD optical drive
GTX 560ti

As I only have the one non-optical storage device I did not set any partition parameters at install. I Attempted to do a Startup Repair with the windows disc to maybe try and delete the EFI partition and got the "... System Recovery Options is incompatible with the version you are trying to repair" error. Not sure what that is. If Disk Management shows a healthy partition with "Boot" listed as being contained, why can I not select the SSD as boot device #1? I can boot perfectly fine with the Windows Boot Manager listed as boot device #1 and the SSD as #2, however it's not ideal.

View 9 Replies View Related

USB Windows 7 Boot "ntldr Is Missing Or Corrupt"

Dec 21, 2012

I want to install Windows 7 home premium and got the ISO done with windows 7 usb download tool and unetbootin. When i try booting the USB i get "ntdlr is missing or corrupt press ctrl alt delete to restart"

I swiped the whole HD so there is no current partition on it. The usb is new and fat32 formatted with the 3GB windows 7 iso imgage on it..

View 1 Replies View Related

Created Boot Partition Manually / Service Pack Update Error 0x800F0A12

Jul 28, 2012

I reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.

View 6 Replies View Related

"Select Proper Boot Device" Now "NTLDR Is Missing"

May 5, 2012

Computer Specs:
CPU: I5-2400
MB: Asus Pz868
Ram: Corsair 8GB Vengeance LP
Using on board VIdeo For now
Maxtor HD Sata
WD Raptor Sata
HP Lightscribe DVD-r Drive Sata

Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select proper boot device, and now it states ntldr is missing. From what I have been reading it seems as if my partition with my windows 7 install is not set active. I do not have my windows 7 DVD only my old vista DVD. I tried to boot into it to make use of CMD and attempt to make my partition active but I was unsuccessful to even get into CMD. I went into bios and forced booted from the drive with the OS and still same error, also I attempted to disable the other sata and run the computer again with no success also. Look forward to hearing from someone soon. I will be sitting by my laptop all night until this computer gets running.

View 5 Replies View Related

How To Create A Logical Partition Inside Existing Primary Partition

Oct 19, 2012

I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.

View 6 Replies View Related

NTLDR Missing During Install?

Sep 7, 2010

I've just recieved Windows 7 Ultimate but when I try and boot it from the CD it comes up with the error message'NTLDR is missing press ctrl alt del to restart'.The confusing part of this is that I've not yet installed the OS, this is after I select which drive to boot from, but before the Install page comes up.I've also tried installing from my current Windows XP OS, but when I do so it comes up with the error code 0x80070490 ~ which means it can't 'Find a location to store temporary installation files.'[code] It's not a matter of me burning a bad .iso file as I bought the DVDs whole from Microsoft, so I neither downloaded or burnt them.

View 9 Replies View Related

NTLDR Is Missing In Windows 7?

Jun 27, 2011

I have 3 physical hard drives, we'll call them A, B, and C. Hard Drive A has a partition for Windows 7, a NTFS partition for storage, a EXT3 (Linux), and swap (Linux). Hard Drive B has 1 NTFS for storage. Hard Drive C has 1 NTFS for storage. I am trying to replace Hard Drive B (with nothing related to Windows 7 on it) and when I try to boot into Windows with my new blank drive installed I get "NTLDR is missing." From what I've read NTLDR was only used up to Windows XP. The drive I am trying to remove isn't even associated with Windows 7 anyway. When I put Drive B back in everything works fine again. why I cant remove drive B even though it has nothing to do with the physical or logical drive containing Windows 7?

View 4 Replies View Related

NTLDR Is Missing At Bootup?

Aug 16, 2011

I installed Windows 7 again after a couple months on XP, and I was just getting everything moved and copied from my secondary hard drive which stores my Acronis backups, and all of my data.The last thing I did was install Acronis, which wanted me to restart my PC. No problem, it worked just fine. Made a backup, and turned on Acronis Startup Recovery Manager (ASRM)... Everything worked perfect until I restarted for some reason, I don't remember what it was... I got NTLDR Is Missing, press Alt+Ctrl+Del to restart So I did, and it came up again, and couldn't find a way to fix it...Even trying to use "fixmbr" from a Win2000 disc's console didn't work, which usually, it fixes things like that.... I set it down for the night...Woke up, and had the strange idea of unplugging and removing the hard drive that contains my data files and Acronis Secure Zone.... And wow, It worked...how can I plug my hard drive back in and be able to boot up? Remove Acronis? Turn off ASRM?

View 3 Replies View Related

Created A 20gb Partition On External Hard Drive / No Longer Require Partition

May 9, 2011

I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.

View 1 Replies View Related

Windows 7 Installation NTLDR Missing?

Nov 14, 2011

I'm trying to install win7 from a usb (created from windows 7 usb dvd download tool) onto a formatted drive. I keep getting ''NTLDR is missing press ctrl + alt + delete to restart'' on my screen. Every 'solution' i've come across so far requires me to have some sort of boot disk or a previous version of windows on the drive. neither of which I have.

View 1 Replies View Related

NTLDR File Missing In Bootable DVD

Feb 28, 2010

i prepared a boot-able win 7 dvd, but while booting NTLDR file is missing is shown.

View 3 Replies View Related

Computer Won't Start - Ntldr Is Missing

Sep 1, 2012

Computer wont start ntldr is missing

View 6 Replies View Related

NTLDR Is Missing Press CTRL + ALT + DEL?

Nov 12, 2012

I used Active @ KillDisk to wipe the hard drive completely clean on a machine that was running Windows 7. After ejecting the Active @ disc, I restarted the machine with the Windows 7 disc in the cd/dvd drive, after already having changed the boot order to boot from the cd/dvd drive, and recieved the infamous "NTLDR is missing Press CNTRL + ALT + DEL" message.

I've tried multiple Windows discs (Xp, Vista, AND 7) to no avail. Still receiving the same error message. I can't even get to the stage of being able to run the Windows repair.

View 21 Replies View Related

Formatted HD, Trying To Reinstall Windows 7 - NTLDR Is Missing?

Apr 26, 2011

put together my barebones system, installed Windows 7, and everything was great.Then Iinstalled Sony Vegas 10. The next time I tried to boot up, I got several BSODs and couldn't boot in any mode. Everything was not so great.After trying a few things, I formatted the HD in the hopes of starting fresh.Upon first bootup, I got a message saying that "NTLDR is missing."I've tried using the boot CD & USB method described [URL]but it hangs up in a DOS-looking screen on a line that says "[0.762735][<c01034a7>] kernel_thread_helper+0x7/0x10"So that's where I am right now.

View 14 Replies View Related

I Made C: Partition Too Small

May 25, 2009

I installed Win 7RC 32 onto a 160 GB hard disk which I partitioned. I allocated about 25 GB to C: system, and formatted the rest on to a D: drive for data. I've found that this may have been a mistake, as getting program installations to default over to D: are problematic (and not recommended by Microsoft, as per some previous threads I've read here).

And so I am running out of C space, and have several programs "manually" installed over to D. Quite frankly this is a pain, and I am about ready to throw in the towel and just try to extend the C drive. But maybe there is a way to avoid?

My question is this: what's my best approach to correct all this? Specifically, I'd like (if it is possible) for all my libraries/directories to default to D: so that I can readily reinstall Windows 7 (or downgrade) the C: System drive should it become necessary. This was my original goal and hope. I was able to have this with XP, although that was some time ago and I forgot the steps.

Anyone have an good suggestions for me, or should I just extend C: and give up this idea?

View 9 Replies View Related

Windows 7 WD ESATA Hard Drive Crash NTLDR Is Missing

Jan 13, 2012

Had a dual-boot system (Win 7 on drive 1, XP on drive 2) installed. Got an NTLDR is missing error on the primary WD drive on which Win 7 was installed. XP wouldn't boot either because the MBR is on the primary drive. So, I had to reinstall XP and all the software on the 2nd drive and test in original and another computer. Worked fine. When plugged into the motherboard, the Win 7 eSATA drive is not recognized by either of the 2 computers in the BIOS. It won't boot and I can't even look at the drive to see the contents - it's a non-entity as far as Windows is concerned. I plugged it into a Mac with an external eSATA to USB adapter and the Mac saw the drive but said that it was unreadable and asked if I wanted to format the drive. Since I thought I might want to try to recover files, I didn't. Anyway to see the contents of this drive with Windows and recover them or does it seem to be dead from the description?

View 1 Replies View Related

Undo A Partition Made In Windows XP?

Feb 7, 2013

When I open a PDF file using Adobe, only one page opens, not the entire document. To access the next page, I have to open a new window. On my Vista computer, the entire document will open. How do I fix or change so the entire document opens?

View 1 Replies View Related

Cannot Boot To Windows / BOOTMGR Missing / Partition

Sep 12, 2012

i cannot boot my Windows 7 64 bit Dell Studio 1558.Cannot boot to Windows.Error(s)BOOTMGR IS MISSING , CTRL + ALT + DEL TO RESTART. Description:

1. Initally had two partitions .. C and D ..
2. Tried to merge C and D to make C more by using Partiton Wizard.
3. Computer Restarted.
4.BSOD at Starting windows logo
5. Stuck at boot.
6. Launched Windows repair.
7. Unable to do repairs.
8. Dell restore unable to locate present installation. ( "current installation : (Unknown) at Unknown drive)
9. Checked partitions using DISKPART at command prompt.
10. Tried to change active partition . Restarted.
11. BOOTMGR MISSING ERROR. Dont even go to startup repair.
12. DVD DRIVE of LAPTOP NOT WORKING so made Windows Startup repair USB bootable.
13. Now have Access to Recovery Menu.
14. Made Partition Wizard Bootable USB . Now have access to Partition Wizard Also.
15. Tried installing Windows 7 using USB. Got error "installation error. verify windows sources are accessible Windows 7 Instalation Problem - Error Code 0xC0000005.
16. Stuck at boot now.

I checked OS drive in partition wizard bootable , it is intact..Windows installation is there....Every drive is ok but somehow booting not from that drive.I will attach photographs of Partition Wizard Partiton status.

View 2 Replies View Related

Delete A Primary Partition?

Aug 2, 2012

I have two primary partitions and I want to delete one of the and completly expand the other. When i get in my computer/manage/disk management if i right click a partition it won`t let me le delete it or expand it. How can I have A SINGLE hard drive completly expanded ?

View 8 Replies View Related

Can'T Format A Primary Partition

May 28, 2009

I want to format my D: drive to clear some space. Thing is my D: used to be my C: drive under XP when i was dual booting so its showing as an active primary partition and Windows 7 wont let me format it.

Ive tried deleting everything but some things are refusing to go (like the file boot which i assume is to do with dual booting).

View 9 Replies View Related

How To Create More Than 3 Primary Partition

Jul 29, 2012

I reach my limit and have 3 primary partition but I want to create one more. So is there any software or method to create a primary partition?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved