I installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.
View 3 RepliesIs it possible to dual boot windows 7 and ubuntu, with ubuntu on a external hard drive? I can connect my external hard drive via USB 2.0, USB 3.0 or E-SATA. I want windows 7 as my main OS.
View 8 Replies View Relatedi bought a used computer from a pawn shop with windows xp and windws 7. I boots up 7 but is to slow. windows xp has a password needed to open that i dont know. how can I dump 7 and open xp without the password.
View 1 Replies View RelatedCan i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work
View 1 Replies View RelatedI have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.
My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.
My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?
Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?
I am thinking about dual-booting my system with Windows 7 as the main OS, and linux ubuntu as a secondary. I have a few questions:
1. How much space should I leave for ubuntu's partition?
2. How do I make a swap partition (or whatever it is called, for swapping files between OS's)?
3. Can I set it up to automatically boot into windows unless I am holding down a specific key, or something similar?
BTW, my HDD is ~500gb, but my current (factory) windows partition is 450gb.
I've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 Replies View RelatedI've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedI have a Toshiba laptop that came with a preinstalled copy of Windows-7 (64 bit) version purchased in July 2010. No setup disk came with the laptop, but there is a "Toshiba recovery media creator" utility. Now, I want to format my laptop, and here I have few queries regarding this:
[1] What is the better option for formatting my drive? Should I use the Toshiba media-creator or install a clean version of Windows-7 from an ISO download (am I allowed to do that? If so, what is a good site to download?) There is a "sticker-certificate" on the bottom of my laptop with a product-key. Will it work with the new install?
[2] Do I have the option of installing a 32-bit version of Windows-7 instead of 64-bit with the above license? The reason is that most applications I use are 32-bit and hence a 32-bit OS is better suited for me. But does the license allow me to do that?
[3] (The tricky part) - Since I have a good 320GB HDD, I want to dual-boot by creating two partitions - with a linux distribution (Ubuntu/openSuse) running on the second partition? Assuming I don't have the option of clean-install, will I be able to create the extra partition for linux using the Toshiba utility?
I have two primary partitions and I want to delete one of the and completly expand the other. When i get in my computer/manage/disk management if i right click a partition it won`t let me le delete it or expand it. How can I have A SINGLE hard drive completly expanded ?
View 8 Replies View RelatedI am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies View RelatedI created a new partition and formatted it into Fat32 so my PS3 could recognize it. Now I don't need it. I now have a 30 GB and a 100 MB partition, and I don't know how to get rid of them.
View 1 Replies View RelatedI lost access to my windows 7 drive (Dual-boot windows 7 & Ubuntu). every time I try to run Windows 7 I get the message: Bootmgr is compressed, Press CTRL_ALT-DEL to restart. I could run Bootrec /fixmbr or diskpart or attrib to rebuild my mbr table through DOS command window using my windows 7 recovery CD. The problem I cannot access drive C: where my windows 7 are. I get the error message: Cannot open volume for direct access or system cannot find the drive path or specified. I still can access all my windows folders and files through home folder in Ubuntu. I don't want to reformat and reinstall windows. Is there is a way to run the DOS commands within Ubuntu
View 3 Replies View RelatedIts possible to move my Primary partition to another Hard disk? I have 160GB seagate and i want to buy 80GB hard disk to move my Primary partition(160GB seagate) in 80GB hardisk?
View 3 Replies View RelatedI have a desktop that I installed Windows Server 2008 Web Edition on, and then later added Windows 7 Pro on a separate physical drive.
Server 2008 is C:
Windows 7 is Z:
I used bcdedit to delete the boot entry for Server 2008, and now I'd like to remove the install of Server 2008 and reformat the drive. However, I am not able to delete the volume or format the c drive.
I currently have a system running XP with two IDE hard drives and 3 partitions.
I have taken Windows 7 as a chance to get myself some much needed extra space! and purchased a new 1tb SATA drive.
I really dont want to lose the exisitng data I have so my original plan was to take my main IDE harddrive with most of my data stick it in an external USB carrier and then start fresh in the system with the 1tb and Windows 7.
What would be cooler would be if I could add the 1tb to the exisiting system and install Windows 7 on that (ideally with that as C and either then have much quicker access to transfer data to the new drive or even dual boot with XP at first incase I have any issues with Windows 7. Can anyone advice me on how easy/risky this is? And what they would suggest to someone trying to maximise the uptime of their PC?
The motherboard died on my 3-year-old Compaq, so I just ordered a new computer that comes preloaded with Win7Home Prem x64. It was from Dell Outlet so I couldn't choose the OS. I've been using MCE (XP pro 32-bit) for several years and love it.I'm worried about program and hardware compatibility with Windows 7 x64. I don't use very graphics-heavy apps like CADD, Photoshop, etc. I only plan to do a little video editing with my .avi clips. I also have an older version of Replay AV that I use to record live streaming radio. I don't want to buy a new scanner (Canoscan LiDE 20 - no x64 drivers!) so here are my options:
A-Partition the new 1TB drive for dual boot setup with Windows 7 Home x64 / WinXP Pro (32-bit). I would buy the XP Pro OEM Branded DVD.
B-Install my old 200GB SATA Seagate Barracuda 7200 as a second drive and run XP programs and scanner from that.
C-Buy Win 7 Pro 32-bit OEM Branded discs, remove Windows 7 home x64, and do a complete new install with the new discs, and hope that my XP programs work with XP Mode. (new i5 processor supports virtualization)
I have Windows XP64 and XP 2005 installed on adjacent partitions on an 80 GB IDE hard drive. I had been accustomed to using BIOS to choose the drive and EasyBCD to choose the OS. A few days ago I was unable to boot into this drive because I kept getting the error "NTLDR missing (press Ctrl-Alt-Del)." I tried using Microsoft's BCSetup2 (I think that's what it's called) but couldn't get a floppy disk to boot.
Being that there wasn't much on this hard drive, other than the Windows OS's, I decided to reinstall the Win64 on the first partition. I find now that EasyBCD does not install on my XP64, so evidently I must have had it installed on the XP MCE partition. I'm wondering now how I can go about accessing the MCE on that other partition, or finding or remaking the boot loader.
I have a new Laptop with Windows 7 Home edition (factory installed). It has only primary C: partition.
Is there any tweak to partition the HDD directly using windows without re-formatting the HDD
I have a Dell Inspiron 1440 laptop with Windows 7 Home Premium 64bit. Some of my older applications do not support this platform. My processor does not support Window Virtual PC and Windows XP mode so I was hoping to add XP as a dual boot. Is it possible to boot XP from an external harddrive or USB instead of having to partition the internal hard drive. Or do you have any suggestions on how I can load XP after Windows 7 is already loaded.
View 2 Replies View Relatedcan I dual boot using an ext. Hard drive. I found an old 250gb phanton hd I've never used. Figured I could throw it in there. Would vista dual boot to that. Or no??
View 2 Replies View RelatedI just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
View 9 Replies View RelatedHere's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
I have recently partitioned my c drive, to create a new drive g, i installed w7 on g and its fine and works...
c drive did have a version of vista on, i planned on downgrading it to xp...
i messesd something up trying to install xp over vista so booting up using w7, i manually deleted all the files from the c drive.... now its totally fubar, it wont let me install anything on it atall...
how can i format the c drive which is my primary partition... or so something with it? combine it back into the g partition or anything..???
i can only access my pc booting up using w7, which is running on the g partition..
I have a 300gb harddrive that i shrank by 50gb to make room for a windows 7 rc1 32 bit dual boot. I now need to extend the partition because i have almost filled it up. When i shrink the main partition (the 238gb one) that has vista on it, it won't let me extend the windows 7 partition onto it.
This is what it looks like in diskmgmt.msc
Vista (188gb)/Unallocated space (~50gb)/Windows (50gb)/HP_RECPVERY (9.91gb)
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies View RelatedI setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedI read that if you have Windows 7 installed, it ruins Ubuntu. I want my computer to have both, so I was wondering, how can I dual boot them without them clashing? I don't want to use Wubi, by the way.
View 4 Replies View RelatedI just bought a cheap laptop from Walmart yesterday with windows 7. I am not a fan of it so I wanted to see if I could dual boot windows xp. Luckly it is a IDE machine not sata. So I Downloaded a copy of windows xp (I have a license key for all the people who would shun me for it, it is paid for). Well when I was making a new partition to install windows xp on I set the new partition to active, rebooted and wala, my computer won't boot because I'm a bone head sometimes. I have access to another windows 7 comp that is Extremly slow and I put emphasis on Extremly
View 4 Replies View RelatedI can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View Related