I've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 RepliesI have a 500 GB Western Digital Hard Drive, I can't access one of its partitions, it says access denied, and I have the ownership and all security stuff is marked for my account and system. Still can't access it, while I can when I boot from my other hard drive which have windows XP.
View 3 Replies View RelatedI installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.
View 3 Replies View RelatedI am running Windows Ultimate 32 bit. I have 2 SATA Hard Drives (one with OS), 2 SATA DVD and Blu-Ray Drives and 1 IDE Hard Drive which is configured as a slave.Second - I needed to do some hard drive trouble shooting for another computer that had a (possibly) dead IDE Hard Drive. To do this I shut down my computer, and attached the (supposedly) dead IDE Hard Drive in its place.Now - all the trouble began.After booting into the Bios, I noticed the supposedly dead hard drive did not register even though it was spinning. I kept booting into the OS to see if it would be recognized in any case - it was not.I put my working IDE Hard Drive back in - after shutting down and removing the dead IDE Hard Drive.I booted back into the BIOS and noticed my good IDE Hard Drive wasn't being recognized either. I then went into advanced Bios settings and walla - it saw my hard drive but said I needed to reboot.After rebooting I noticed the same thing with the Bios, but this time proceeded to boot into the OS.After signing on, I noticed my Good Hard Drive was no longer recognized in Explorer. I went into Administrator and Computer Management and then into Disk Management.
View 2 Replies View RelatedIts possible to move my Primary partition to another Hard disk? I have 160GB seagate and i want to buy 80GB hard disk to move my Primary partition(160GB seagate) in 80GB hardisk?
View 3 Replies View RelatedAs written above, my external (WD) harddisk drive cannot be accessed. At first it ask me to format my drive but i clicked no. then i used testdisk to write to the table. and then i restarted my computer. but then now it says drive is not accessible?
View 1 Replies View RelatedI have a new Laptop with Windows 7 Home edition (factory installed). It has only primary C: partition.
Is there any tweak to partition the HDD directly using windows without re-formatting the HDD
I just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
View 9 Replies View RelatedHere's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
I have recently partitioned my c drive, to create a new drive g, i installed w7 on g and its fine and works...
c drive did have a version of vista on, i planned on downgrading it to xp...
i messesd something up trying to install xp over vista so booting up using w7, i manually deleted all the files from the c drive.... now its totally fubar, it wont let me install anything on it atall...
how can i format the c drive which is my primary partition... or so something with it? combine it back into the g partition or anything..???
i can only access my pc booting up using w7, which is running on the g partition..
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedI got pop up in utorrent says a directoy is corrupt, I start to run chkdsk on that drive. in this case in have drive letter E.I click on computer, then go to the drive, right click, properties, tools, check now.
it says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidently closed because I was switching between several programs. I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadabe.' I tried to start pc 2 times, still same.
I want to delete the hidden primary partition that came by default from transcend 4 GB pen drive model TS4GJFV30. It is preventing the drive to boot with windows 7. Also it is not allowing the drive to play media files on media peripherals.
View 3 Replies View RelatedI am running Windows 7 Pro (64). I have 2 hard drives installed. The (C) keeps my system and program files. A second 1GB hard drive is used for back-ups, pictures, music, etc. I checked and recked all permissions, and they are in order. There is only one user on the computer, Admin. I was able to access the drive up until a few weeks ago. I am able to scan the drive with Microsoft Security Essentials. I am able to access the drive while in safe mode, but for some reason I get this message while attempting to access it while in normal mode.
Location is not available
F: is not accessible
Access Denied
I have a Verbatim/SmartDisk USB 2.0 Firelite external drive. The drive is recognized by the system and shows up in the Device and Printers management tool. While I can see the drive, I cannot view the data on it.
I have another external USB drive by Western Digital and it is fully recognized and accessible from Win7 RC1. The Firelite is recognized and accessible on a WinXP system. It was working on Win7 Beta.
I am running Win7 RC1
Thoughts?
i had windows 7 OS in drive c . while i was partitioning drive c using disk management, disk 0 which has all recovery image drive c were converted to simple type.
View 5 Replies View RelatedIm attempting to retrieve my data on my old hard drive. I have an external usb sata connector. When I attempted to open the drive I was given this message : "G: is not accessible. Access is denied." After looking around the web, I tried to take ownership of it but I have not prevailed in accessing the hard drive.
View 1 Replies View RelatedI have windows 7 32 bit on a toshiba laptop. I am posting becuase this is a strange situation. I have a goflex exteral terrabyte. The computer recognizes it, lists it in the device manager and claims that it is working properly. However, I can't access it, I can't save anything to it, or get anything from it, or even see the files on it.
Now, I have a mac and a pc, the drive said it could be used on both. So i first used it on the mac (and it works perfectly) but not on the pc. It there a share error maybe?
I am an editor and I was hoping to be able to easily move from my computer (mac) to my clients (pc).
I have two other hard drives in my computer. My operating system now is on "E" drive. I'm wanting to replace my "E" drive with a larger and faster drive.
I am currently backing up my entire "E" drive on my "C" drive.
Is it possible to simply pull out my current "E" drive and install a new "E" drive and then restore my backup to my new "E" drive? Or is it more complicated than that?
So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
View 12 Replies View RelatedI've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedI bought a new 2 Tb hard drive because my primary one was getting full. I would like to do a fresh install on the primary drive once I have moved over all the games, videos, pictures, etc. that I don't want to lose. I can format the primary drive and reinstall windows without affecting the content on the second drive, correct? Is there anything I need to know?
View 7 Replies View RelatedWhat is the best way to recover data from a healthy drive that has a failed motherboard? (SATA drive - desktop internal - from Win 7 OS environment)
View 14 Replies View RelatedI'm having an BSOD error, and it also refuses to write a minidump and kerneldump. So I can`t use any analysis tools. And yes, it's enabled!
Stop message: *** STOP: 0x00000F4 (0x0000000000000003, 0xFFFFFA800F209B30, 0xFFFFFA800F209E10, 0xFFFFF80003787240)
After restart it sometimes does not find the primary hard drive. The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all. I did a checkdisk and it turned out clean.
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View RelatedI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
I have two primary partitions and I want to delete one of the and completly expand the other. When i get in my computer/manage/disk management if i right click a partition it won`t let me le delete it or expand it. How can I have A SINGLE hard drive completly expanded ?
View 8 Replies View Related