I have a 500 GB Western Digital Hard Drive, I can't access one of its partitions, it says access denied, and I have the ownership and all security stuff is marked for my account and system. Still can't access it, while I can when I boot from my other hard drive which have windows XP.
View 3 RepliesI've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 Replies View RelatedHow to partition hard disk 500gb
View 2 Replies View RelatedIm trying to partition the drive but I cant make the C drive less than 500gb. I followed this guide How to Resize Disk Partition in Windows 7. How do i make it smaller. I wanted to make C for Windows 7 and extra, but not half the hard drive.
View 1 Replies View RelatedIomega eGo 500GB External Hard Drive isn't recognized
View 1 Replies View RelatedAs written above, my external (WD) harddisk drive cannot be accessed. At first it ask me to format my drive but i clicked no. then i used testdisk to write to the table. and then i restarted my computer. but then now it says drive is not accessible?
View 1 Replies View RelatedI got pop up in utorrent says a directoy is corrupt, I start to run chkdsk on that drive. in this case in have drive letter E.I click on computer, then go to the drive, right click, properties, tools, check now.
it says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidently closed because I was switching between several programs. I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadabe.' I tried to start pc 2 times, still same.
I am running Windows 7 Pro (64). I have 2 hard drives installed. The (C) keeps my system and program files. A second 1GB hard drive is used for back-ups, pictures, music, etc. I checked and recked all permissions, and they are in order. There is only one user on the computer, Admin. I was able to access the drive up until a few weeks ago. I am able to scan the drive with Microsoft Security Essentials. I am able to access the drive while in safe mode, but for some reason I get this message while attempting to access it while in normal mode.
Location is not available
F: is not accessible
Access Denied
I have a Verbatim/SmartDisk USB 2.0 Firelite external drive. The drive is recognized by the system and shows up in the Device and Printers management tool. While I can see the drive, I cannot view the data on it.
I have another external USB drive by Western Digital and it is fully recognized and accessible from Win7 RC1. The Firelite is recognized and accessible on a WinXP system. It was working on Win7 Beta.
I am running Win7 RC1
Thoughts?
Im attempting to retrieve my data on my old hard drive. I have an external usb sata connector. When I attempted to open the drive I was given this message : "G: is not accessible. Access is denied." After looking around the web, I tried to take ownership of it but I have not prevailed in accessing the hard drive.
View 1 Replies View RelatedI have windows 7 32 bit on a toshiba laptop. I am posting becuase this is a strange situation. I have a goflex exteral terrabyte. The computer recognizes it, lists it in the device manager and claims that it is working properly. However, I can't access it, I can't save anything to it, or get anything from it, or even see the files on it.
Now, I have a mac and a pc, the drive said it could be used on both. So i first used it on the mac (and it works perfectly) but not on the pc. It there a share error maybe?
I am an editor and I was hoping to be able to easily move from my computer (mac) to my clients (pc).
I have a Hitachi 2TB Hard drive with about 1.2 TB worth of data (it was my data drive for my SSD). I've recently had to temporarily move motherboards (from a Z77 Motherboard to a Dell Foxconn from 2007). However, I can't use my SSD on the Foxconn (G33M) so I made a 500GB partition to use for WIn7 until I get my mobo back. However, I can't install because Windows keeps saying I can't install on a GPT partition. Before I would just change the mboo into EFI/UEFI mode to fix it, but my 2007 board doesn't support it.
View 3 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies View RelatedI have an external western digital HD which is 2x 500gb sata drives that mount to 1tb, I assume there bridged to make the 1 TB possible my question is that ive decided to put these in my pc case(couldnt do it before) as media drives etc, I put both in, but my pc only sees the one 500gb drive is there anything I can do for me to see both.
EDIT also ive just noticved I can actualy see the non working drive in BIOS.
I just purchased a new computer with windows 7 installed. So far all I have done is hooked it up and turned it on and it did it's thing for the first time. Before I go any further, I would like to partition the 1tb hard drive into several drives. I have no idea how to do this.Everyone I have contacted, is a charge support. I can't go that way
View 14 Replies View RelatedNow that I have formatted my hard driver, how do I partition and format them from the command prompt?
View 9 Replies View RelatedI really like Norton ghost for system images because I don't need a USB or CD. I do but its super convenient its on computer. Was wondering if there's a partition program that would add an entry. So long I don't wipe Is should be usable.
Another thought is it possible to copy contents of a bootable usb whatever it may be to the drive and manually create an entry or does it not work that way?
Since the time I have purchased my laptop, I have a single C Drive of 288GB (the specs say 320 GB). Now I'm planning to install Windows 8 beta (in future) on my system without losing my data.Will creating a partition of my disk I want to have two drives. One just for the OS and the other for my files, so that whenever I want to install a new version of Windows, I just need to format one drive without the loss of any data.
View 5 Replies View Relatedhow to get partition the hard drive in hp laptop?
View 1 Replies View Relatedshould I partition my hard drive to have one with applications and other with data. C & D drive
View 1 Replies View RelatedI have windows 7 and have 2 internal hard drives, the main hard drive is C, the second hard drive for storage was partioned into 2 drives, letters D and G, drive G is not visible anymore and when i go to disk management on drive D is visible how do i get drive G back as i had data on that drive
View 1 Replies View RelatedMy Computer indicates only 35Gb free on my drive, and dropping daily. WinDirStat shows 400Gb of 'unknown' files which I'm unable to delete (option greyed out). I have used various drive cleaners, done a chkdsk & a full system virus scan to no avail.
View 5 Replies View RelatedNeed a WDC RE3 SATA Driver for a DC7100 and a Windows 7 ICH6R Controller Compatibility Issue
I'm trying to install a Western Digital RE3 500GB SATA Drive on to the System but the Latest Version 2.15A of the 786C1 Bios is listing the drive at 0.0 MB and Windows 7 doesn't see the drive at all. I'm trying to install Windows 7.
The WDC Site recommends that I contact my motherboard manufacturer, so I'm following their recommendation and posting my request for a DC7100 SATA Driver for a WDC RE3 Drive here.
I've been to the Intel site and there doesn't seem like there is a proper Windows 7 Update for the ICH6R Controller since the Intel® 82801 FB/FR I/O controller has been discontinued.
I want to download the Intel® Matrix Storage Manager Floppy Configuration Utility dated 7/2009 from the Intel site, but I need confirmation from HP Support that this utility will work with a DC7100 with he Latest Version 2.15A of the 786C1 Bios for a Win 7 install.
My Drive E just lost from my computer! I don't know how did it happen. I try to search through google but I can't find a solution.
View 9 Replies View RelatedI run the system recovery with the build in recovery partition from Sony but the installation cannot be completed due to the hard disk failure. I want to replace with a new hard drive but also want to keep the original recovery partition because there is some useful software that is included. I have a external adapter to connect my hard drive through USB to my computer and have a software to recover the data in the recovery partition.
View 9 Replies View RelatedI used MiniTool Partition Wizard Professional edition to merge two partitions and now my daughter's computer won't start.I installed a new 750 gb hard drive to replace her 320 gb drive. Everything was fine, but when I cloned her 320 gb hard to the 750 gb drive, it partitioned the drive so that 320 was allocated to the active boot system and the other 400-some were unallocated. I needed to merge both partitions so that all the space would be usable. This is how the drive was partitioned.B: System 199 MB --> C: Bootable Active 285 GB --> D: System Recovery 12 GB --> Unallocated 400 GB..MiniTool Partition Wizard will only allow you to merge two partitions that are next to each other, so in order to merge partition C with the unallocated partition I had to delete partition D.Everything was fine, but then MiniTool said it couldn't finish the merge process because partition C was in use. It told me to restart my computer to finish the merge process.I restarted the computer and now it won't boot. I download a Windows 7 64 bit recovery ISO and burned it to disk then popped it in the drive and restarted the computer but it still won't boot. I even went into BIOS settings and made sure that the CD/DVD drive is first in line in the boot order. It still won't boot.Not sure what to do from here. I'm a Mac user, my daughter has the Windows 7 computer, so I'm not exactly very well-versed in that operating system. Upgrading the hard drive on my Mac was very easy, no merging of partitions needed. How do I get my daughter's computer running and get the partitions merged?
View 6 Replies View Related