Since the time I have purchased my laptop, I have a single C Drive of 288GB (the specs say 320 GB). Now I'm planning to install Windows 8 beta (in future) on my system without losing my data.Will creating a partition of my disk I want to have two drives. One just for the OS and the other for my files, so that whenever I want to install a new version of Windows, I just need to format one drive without the loss of any data.
View 5 Replies
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
I just purchased a new computer with windows 7 installed. So far all I have done is hooked it up and turned it on and it did it's thing for the first time. Before I go any further, I would like to partition the 1tb hard drive into several drives. I have no idea how to do this.Everyone I have contacted, is a charge support. I can't go that way
View 14 Replies View RelatedNow that I have formatted my hard driver, how do I partition and format them from the command prompt?
View 9 Replies View Relatedhow to get partition the hard drive in hp laptop?
View 1 Replies View Relatedshould I partition my hard drive to have one with applications and other with data. C & D drive
View 1 Replies View RelatedI have windows 7 and have 2 internal hard drives, the main hard drive is C, the second hard drive for storage was partioned into 2 drives, letters D and G, drive G is not visible anymore and when i go to disk management on drive D is visible how do i get drive G back as i had data on that drive
View 1 Replies View RelatedI have a 500 GB Western Digital Hard Drive, I can't access one of its partitions, it says access denied, and I have the ownership and all security stuff is marked for my account and system. Still can't access it, while I can when I boot from my other hard drive which have windows XP.
View 3 Replies View RelatedMy Drive E just lost from my computer! I don't know how did it happen. I try to search through google but I can't find a solution.
View 9 Replies View RelatedI run the system recovery with the build in recovery partition from Sony but the installation cannot be completed due to the hard disk failure. I want to replace with a new hard drive but also want to keep the original recovery partition because there is some useful software that is included. I have a external adapter to connect my hard drive through USB to my computer and have a software to recover the data in the recovery partition.
View 9 Replies View RelatedI used MiniTool Partition Wizard Professional edition to merge two partitions and now my daughter's computer won't start.I installed a new 750 gb hard drive to replace her 320 gb drive. Everything was fine, but when I cloned her 320 gb hard to the 750 gb drive, it partitioned the drive so that 320 was allocated to the active boot system and the other 400-some were unallocated. I needed to merge both partitions so that all the space would be usable. This is how the drive was partitioned.B: System 199 MB --> C: Bootable Active 285 GB --> D: System Recovery 12 GB --> Unallocated 400 GB..MiniTool Partition Wizard will only allow you to merge two partitions that are next to each other, so in order to merge partition C with the unallocated partition I had to delete partition D.Everything was fine, but then MiniTool said it couldn't finish the merge process because partition C was in use. It told me to restart my computer to finish the merge process.I restarted the computer and now it won't boot. I download a Windows 7 64 bit recovery ISO and burned it to disk then popped it in the drive and restarted the computer but it still won't boot. I even went into BIOS settings and made sure that the CD/DVD drive is first in line in the boot order. It still won't boot.Not sure what to do from here. I'm a Mac user, my daughter has the Windows 7 computer, so I'm not exactly very well-versed in that operating system. Upgrading the hard drive on my Mac was very easy, no merging of partitions needed. How do I get my daughter's computer running and get the partitions merged?
View 6 Replies View RelatedI have an Eternal Hard Drive (Transcend), partitioned. I want to set a password for a specfic partion (not for the whole hard drive)!
PS: TSElite was installed on the hard drive, if it is of any use!
I have download windows 7, backed up all my drivers and copied all my important info onto my external Hard drive and am about to try and clean install windows 7.
But do i have to partition the hard drive? My Dell laptop has a 110GB hard drive which came already partitioned. 10GB is called 'Recovery', do i need to do the same and make a larger partition and install Windows 7 or just leave it as it is?
How to Partition the Hard Drive in a Windows 7 Install ?
View 0 Replies View Relatedwant to just re partition the computer but the computer keeps saying unable to talk to hard drive due to me getting rid of a certin partition
View 1 Replies View RelatedI bought new hp laptop.. it came with 500 GB harddisk, windows 7 home basic, I didn't get any windows cd apart from recovery in hard disk. My windows is installed in c: and that is the only drive that it have... now the situation..
1) I want to partition my harddisk without losing windows means I don't want to format C: drive
2) I also want to install linux in dual mode with windows..
Second question is related to first one because I don't need any method that may lead to situation like I can't install any other operating system.
I created a new partition and formatted it into Fat32 so my PS3 could recognize it. Now I don't need it. I now have a 30 GB and a 100 MB partition, and I don't know how to get rid of them.
View 1 Replies View RelatedHow I could partition my internal hdd without wiping all data from it, and then sharing the partitioned drive within my home network. Also, I was wondering how I could tell what drive letters are already assigned to my laptop's usb ports.
View 2 Replies View RelatedI was wondering if this would work as a poor man's backup system for Windows 7.
1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).
2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.
Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??
I just reinstalled Windows 7 on a new hard drive and during the installation process, I split the disk into two equal partitions of 500gb. In 'My Computer' I can only see one partition which is the C drive but not the other partition. Looking in Disk Management, the other partition seems to be labelled as 'Unallocated'. How can I allocate this into a usable D drive? I would have expected this to happen automatically during the installation process.
View 1 Replies View RelatedI've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 Replies View RelatedI've had my partitions over several drives set for many months. Suddenly on boot this morning, one of the partitions isn't recognized by Windows (7 64-bit). My partition software (EaseUS Partition Manager Pro) does "see" it and shows the correct division of used and unused space. This is an NTFS partition with 11.86 GB capacity and 2.50 GB used. The status is None and the type is logical.The error message box title is "Location is not available". The message is:H: is not accessible.The file or directory is corrupted and unreadable.I've had no activity in this partition for several days. The partitions on either side are fine (fingers crossed they stay that way!). They same the same characteristics (although obviously different capacities) as the missing partition.
View 1 Replies View Relatedlock a hard drive partition and make it read-only?
View 1 Replies View RelatedConsidering a self build project : Intel E5700 CPU 2 X 2 Gig Ram 1 TB SATA HDD. What would be the optimum partition size for the Windows 7 Home Premium 64bit OS
View 8 Replies View RelatedAs some of you may know i encountered the infamous "BOOTMGR MISSING" error which i could find no fix for and decided to do a fresh install of the OS.
Now at the Windows 7 Installation i selected the language and then selected Custom install and get a page asking which hard drive partition i would like to install the OS on. Now here is where somethings wrong. The only thing listed is the 100mb System reserved partition. How do i get the other partitions listed.
i want to create another partition, which can be bootable. so that i will be able to boot from ubuntu as well as windows 7....
View 3 Replies View Relatedi bought a used computer from a pawn shop with windows xp and windws 7. I boots up 7 but is to slow. windows xp has a password needed to open that i dont know. how can I dump 7 and open xp without the password.
View 1 Replies View RelatedI'm trying to install a new hard drive and retire my current one to backup and data storage purposes.
The problem is that I've installed Windows 7 on a hard drive with 2 partitions, an old XP partition (D:) and the new W7 partition (C:). At the moment the disk management screen looks like this:
What I am trying to do is delete the D: partition, and then copy/resize the C: partition including Windows 7 installation to my new hard drive (F:)
If I ignore the new hard drive and just try to migrate to a single partition, I can never get it to boot. I tried using Partition Wizard to set the C: as a primary, active partition, copied over the bootmgr and boot directory, then used bootrec /fixmbr and bootrec /fixboot to try to make Windows 7 bootable from just the C:, but it didn't work. All I got was "disk read error" whilst the PC was trying to boot off the C: (this is with all other drives disconnected...).
I could try to migrate to a single bootable partition from a 'dual boot' configuration?? I tried this video's advice and did everything as instructed but got the disk read error problem.
