I created a new partition and formatted it into Fat32 so my PS3 could recognize it. Now I don't need it. I now have a 30 GB and a 100 MB partition, and I don't know how to get rid of them.
View 1 RepliesI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View RelatedI have an external 1 TB hard drive. Its usually connected to an XP machine, but I can move it to a Win 7 machine. I am unable to delete a directory. I got a hint to try using the CMD window. The top of the dir list is:Quote: K:>dir /XVolume in drive K is 1TB HD[CODE]
View 1 Replies View RelatedI just figured out that I can't delete files from my external hard drive. It's WD Elements 320GB. Only thing I did before this occured is that I converted file system from FAT32 to NTFS via command in cmd prompt, but I'm not sure if that showed up after that. So, I don't have "delete" or "rename" commands on right click. Backup of all files is a no go since I don't have so much free space atm. I use my user account which is also admin account.
View 1 Replies View Relatedhow do you delete old backups from maxtor external hard drive
View 1 Replies View Relatedi bought a used computer from a pawn shop with windows xp and windws 7. I boots up 7 but is to slow. windows xp has a password needed to open that i dont know. how can I dump 7 and open xp without the password.
View 1 Replies View RelatedI have an Eternal Hard Drive (Transcend), partitioned. I want to set a password for a specfic partion (not for the whole hard drive)!
PS: TSElite was installed on the hard drive, if it is of any use!
I have windows 7 on an AMD processor computer, it's a new computer with some upgrades. I'm trying to delete a folder on my external hard drive and it gives me this error message despite the fact that I am the administrator. You require permission from S-1-5-21-3908285926-3313324932-2694402914-1000 to make changes to this folder.
View 6 Replies View RelatedI installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.
View 3 Replies View RelatedThe situation is fairly simple. This morning i.1: Unmounted and unplugged my external drive which is a WD My Book Essential 2TB2: Took it to a colleague and tried to connect it to his IMac4 which has OS X3: Nothing worked, we could see the drive but couldn't access it even with the help of somme tools made for that.4: Took it back home, plug it in....nothing. It doesn't show in My Computer and according to Disk Management and Paragon Partition Manager the space is unallocated.What do you think is happening?
New to the forums and need some help here as I'm lost. I just got my new laptop and noticed that the C drive (O/S) was getting full and wanted to add more space. I deleted the recovery partition of 25GB so I could extend my C partition.
However, I do not have the option to expand my C drive, see the print screen link below:
I also tried using minitool partition wizard which looked to be successful but upon reboot I got an error.
I have a 5610Z Acer Aspire with Windows 7 (32 bit). I pulled a very boneheaded move getting to upgrade from Vista.
I deleted my D:drive (50 G). I back up to a 500 G external hard drive. Is there a way to add the 59G to C:drive where I could use the space.
How do I allocate part of my hard drive that is unallocated ? I have 128 gb allocated and 104 unallocated some please advise d davies
View 1 Replies View RelatedIs it possible to overwrite unallocated portions of your hard drive, primary drive with OS and files, without losing anything?
View 2 Replies View RelatedI have been running a Dual-Boot Setup of XP Pro and WIN 7 successfully for some weeks while I get familiar with Windows 7. Recently I have almost exclusively been booting into WIN 7. In this D.B. Setup The booted OS appears as Primary Partition on the C: drive with the non-active OS as "Unallocated Space " on the D: drive. This all happens on the No 1 Hard Drive. No 2 Hard Drive has been partitioned into several Partitions, the First one as a Primary Partition with the remaining Partitions as Logical drives.
Today , when I booted into WIN 7 , there was no sign of the second hard drive and its Partitions even although both drives (Serial Drives) were recognised in the initial part of the Bios screen during this bootup. When I looked in Disk Management, I saw that the first Partition on the second hard drive appeared normally as a Primary Partition but that all remaining space on this drive was shown as "Unallocated Space". I then re-booted into the XP OS . This showed the second hard drive and all its Partitions normally, i.e. with its first Partition as the Primary and all subsequent ones as Logical Drives.
I currently just set up my new build. I decided to go with Western Digital Caviar Green 3TB for my hard drive. However, I split the hard drive into two parts: 2 TB and roughly about 770 GB unallocated space. I installed Window 7 on 2TB partition. Now, I decide to use the rest of 770 GB of unallocated space. I tried to use Computer Management, but it doesn't give me the option to create a new volume from unallocated space. Similar thing happened with EaseUS Partition Master. With Acronis Disk Director, it doesn't even recognize the unallocated space at all!!! So how can I create a new volume or even merge it with my C drive? Do I have to reformat my hard drive and split them again and do a clean installation again?
Note:I already checked, my BIOS recognizes my hard drive with 3 TB. The unallocated space is right after my C drive. There is only 1 primary MBR partition (C drive), and 100 MB system files right before it.
I have a 500GB hard drive that has 2 unusable bits of space. My obvious question is.Can it be fixed so they can be used or is this stuck like this?
View 9 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedMy ATA external hard disk shows up on my computer, but some partitions on it aren't working. Says I need to format them before I could use them.
View 3 Replies View RelatedI have an .mkv file on two external (2tb)hard drives that i am unable to delete. I've tried unlocker(which actually shut down explorer) moveonboot doesn't work on external drives and a couple other "unlock" programs..
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, Intel64 Family 6 Model
[Code]....
I need to delete 100's of Gigabytes of info off of an external drive sometimes. But I cannot afford to do a quick format. It takes so long to delete that much info, even if I were to bypass the recycling bin. Isn't there a fast way? A quick format is very quick, but deletes everything.
View 3 Replies View RelatedI have a 500gb segate usb drive. I can't move or delete any size file. What can I do. It use to work ok on same system.
View 3 Replies View RelatedI've an 13MB unallocated partition:
And I'm thinking of recovering it to my D (logical) drive. I've did some Google-ing and found a similar post on this forum here.
However, I can't seem to do it. Whenever I right-click on my D drive, the Extend Volume is always disabled. (Means I can't click on it ).
I have an Iomega edternal 1tb drive attached to my laptop.NOW WINDOWS 7 does not show the main partition. It does show the second partition on which there is ther Windows 7 backup. All partitions appesar under Vista ultimate on the same machine. How can I get windows7 to show the missing poartition?
View 2 Replies View RelatedAfter a reinstall of windows home premium7(GA-P55A-UD4P MB, Seagate Barracuda 7200.12 HD,Bios setup for AHCI,(( regedit for AHCI done))windows didnot allow me to format the system partition(first time Ive experinced that). Everything seems to run great, so I dont know if "101MB Unallocated" also no drive letter is ok?
View 1 Replies View RelatedGA-P55A-UD4P MB,Seagate Barr7200.12 500gig.HD,4gigmem,AsusENGT430 videocard.while doing a reinstall 0f windows home prem 7,after deleting and formatting the partions, setup wouldnt allow me to format the new system partion so I went ahead and completed installation.In diskmanagement under volume it shows only 1 partion.Below,shows Disk0 a box-"101MB Unallocated" with a black bar accross the top,a second box-C: 465.66GB NTFS (healthy etc) with a blue bar above.
View 3 Replies View Related