After a reinstall of windows home premium7(GA-P55A-UD4P MB, Seagate Barracuda 7200.12 HD,Bios setup for AHCI,(( regedit for AHCI done))windows didnot allow me to format the system partition(first time Ive experinced that). Everything seems to run great, so I dont know if "101MB Unallocated" also no drive letter is ok?
View 1 RepliesI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
GA-P55A-UD4P MB,Seagate Barr7200.12 500gig.HD,4gigmem,AsusENGT430 videocard.while doing a reinstall 0f windows home prem 7,after deleting and formatting the partions, setup wouldnt allow me to format the new system partion so I went ahead and completed installation.In diskmanagement under volume it shows only 1 partion.Below,shows Disk0 a box-"101MB Unallocated" with a black bar accross the top,a second box-C: 465.66GB NTFS (healthy etc) with a blue bar above.
View 3 Replies View RelatedI'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I've an 13MB unallocated partition:
And I'm thinking of recovering it to my D (logical) drive. I've did some Google-ing and found a similar post on this forum here.
However, I can't seem to do it. Whenever I right-click on my D drive, the Extend Volume is always disabled. (Means I can't click on it ).
i have unallocated disc partition which i want to partition wat can i do to recover it which software can i use.
View 2 Replies View RelatedYesterday I tried making partitions in my hard disk, and I failed Here's what I did:
1. run compmgmt.msc
2. Shrink C: drive
3. my hard disk' capacity shrunk from 451GB to 260GB
4. an error window appeared ("I/O device error" I think)
5. it left me no unallocated space to create partition
using compmgmt I can't extend my hdd back to 451GB, so I used MiniTool partition wizard to restore it (btw, shrinking with MT PartitionWiz resulted the same, no unallocated space)
When I run out of disk space and Disk Cleanup only removes small amount of MB, can I expand my C: partition? Because I have 200 GB unallocated space on my HDD and it's unused.
View 1 Replies View RelatedI have 500 GB harddisc on my laptop with three partitions. I wanted to split the 400gb into 300 + 100 GB. So, I went to disc management and shurnk the volume to 300GB. I saw 100GB unallocated space. But, when I try to create a new partition with that unallocate space, I get a message that 'media not writable' and the 100gb remains unallocated. I have used a software called 'MiniTool Partition Wizard Home Edition'. But, it couldn't apply the changes either.
how can I create a new partition with my 100gb unallocated space.
I bought a 3TB hard drive for my gf and did a fresh install of Windows 7. When I was creating the first partition the Win7 install auto created two more volumes, both labeled as Unalloated. I thought nothing of it as I figured I would be able to merge/create my second partion with the remaining space once Windows was up and running. However, to my dimay I can not create a partition on one of those random Unallocated volumes. I've tried to delete all partition but the one that my OS is running on and I've tried to create two then merger but when I right-click on the second (first one works) volume the option t create a simple volume is greyed out.
View 7 Replies View RelatedI created a new partition and formatted it into Fat32 so my PS3 could recognize it. Now I don't need it. I now have a 30 GB and a 100 MB partition, and I don't know how to get rid of them.
View 1 Replies View RelatedNew to the forums and need some help here as I'm lost. I just got my new laptop and noticed that the C drive (O/S) was getting full and wanted to add more space. I deleted the recovery partition of 25GB so I could extend my C partition.
However, I do not have the option to expand my C drive, see the print screen link below:
I also tried using minitool partition wizard which looked to be successful but upon reboot I got an error.
I unexpectedly deleted a partition, now i want to recover data from it.
View 1 Replies View RelatedPreviously my machine was dual-booting Windows 7 and Ubuntu. It worked fine with no problems until I decided that I didn't use nor want Ubuntu on my machine. Disk space was getting low for my primary partition and I decided it was time to let Ubuntu go. Anyhow long story short I cleared the two partitions that Ubuntu was using through the 'disk management' tool in windows. I didn't think at the time that GRUB would be stored within these partitions and that lead to the problem of being unable to boot anything.
I made and used a repair disc via another machine and then restored the bootsector code with it. That fixed the problem of being unable to boot. Now my problem is that I'm left with around 3-4 GB of wasted space in a partition. I was wondering if this 3-4 GB could be added to my primary storage partition? I've looked everywhere in the disk manager but I can't find anything there. I'm unsure as to if there is some 3rd party software available that could fix this? That 70GB partition shall remain undisclosed.
I read up a bit on this on other threads but none of them are exactly specific to my issue.I need to expand my C partition by utilizing the free unallocated space on disk D (a separate disk) that I just made by deleting the only partition on there.I guess this is not possible through windows disk management tools but I didn't want to start downloading any 3rd party software for this before I got some guidance from here. lease take a look at the following screen and let me know if using the 238.38GB of unused (unallocated space) I can extend the C partition without having to delete that partition, having to backup the files on it or making images. I already backed up everything I had on the D partition and then went ahead and deleted it through the computer management tool.
View 3 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies View RelatedRecently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedThrough a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies View RelatedI have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies View RelatedI recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedI leave My PC turn on last night and today i go back and see my 2 drive disappeared.i use "Disk Management" but couldn't see them.then i use "Acronis Disk Director Suite" and see them "Unallocated" and joined together...!if i use "Create Partition" option in acronis , all my data will lost...my question is :how can i create partition without losing my data?
View 9 Replies View RelatedEarlier I had two partitions, D(logical) and C(system). Now, I have added a new HDD and I've made two new partitions, B(logical) and S(system), now I want to format C and install Windows in S partition.
View 4 Replies View RelatedI am using windows 7 64bit and I want to install Fedora along with the windows.I partition my drive D: to 100GB which is total of 238GB of size for fedora O.S I partition it by this process.My computer--> right click--> manage-->Disk management. And then I shrink the new volume. The new drive will be created as I:But when I am going to install fedora. It didn't show that newly created drive i.e I:Why it is happening. I format that drive many times but nothing works. All it shows me in fedora that 238GB drive.Is there is a mistake in partition?The partition format is NTFS?
View 4 Replies View RelatedI'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
I was trying to get a dual boot setup of Windows 7 and Ubuntu where I had 1 partition for Windows 7, another for Ubuntu, and a third neutral partition accessible from either OS where I would house all of my data. The problem is, my computer already had 3 partitions set up: Windows 7, the system boot partition, and one called PQService. Because I could not find a tutorial to delete pqservice, I decided to delete my system partition, even though this seemed a little more risky (apparently it was lol.) I used this tutorial: TeraByte Unlimited Knowledge Base to copy the boot files to the windows partition and delete it. I then booted into a Live CD of Ubuntu, and used Gparted to move my Windows 7 partition in order to get rid of the 100MB of unallocated hard drive space. I then attempted to restart my computer into Windows and i got an error saying that windows could not boot because of some recent hardware changes. Is there anyway I could get back into windows without reinstalling it? Do I need to figure out some way to restore my System partition? Is there someway I could get windows to boot without doing either of those?
View 8 Replies View Related