"setup Was Unable To Create A New System Partition Or Locate An Existing Partition"
Jun 8, 2011
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies
ADVERTISEMENT
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jul 15, 2010
So I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
View 4 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Aug 13, 2012
Last night after 8 hours of toil, I finally completed a clean install using a usb drive on my asus ux32vd using the brand new SSD drive I had just bought. The reason it took so long was I kept getting this error -> "Setup was unable to create a new system partition or locate an existing system partition." What I did to finally get it to install was get to the c prompt during the installation and run diskpart and make the integrated 32GB SSD 'offline' and then I selected the SSD and used the 'clean' command and left the SSD unpartitioned and raw. I had read that with SSDs on a clean install you should leave it raw and windows will install on it. And it worked. Now here's problem number 2, which feels worse than problem number 1. After installing everything went swimmingly. I started updating drivers, etc. I got to the point where I needed to do a Windows Update. There were 91 things that needed to be updated/installed. So I ran update with all 91 and that went fine until it went to restart - it wouldn't boot into windows. Instead it kept going into that startup restoration program over and over saying it couldn't fix the problem. I tried to delete the updates manually through cprompt by running dism, but this failed and I figured to hell with the hassle I'll just reinstall Windows since I know how now and then update windows one update at a time. BIG MISTAKE. I tried doing EXACTLY what I had done before - doing diskpart, offlining the integrated SSD, etc - however this time the error isn't going away. It's still saying "Setup was unable to create a new system partition or locate an existing system partition." I don't get it. I'm doing exactly what I did when I got it to work, but it's not working now. I can only surmise that the system is still recognizing the integrated SSD somehow.
View 9 Replies
View Related
Aug 13, 2012
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
View 4 Replies
View Related
Dec 6, 2012
Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"
I've tried to do some procedures, but also can not create partition, do not know what else to do.
View 3 Replies
View Related
Jan 27, 2012
I built a new pc and i want to put windows 7 pro on it. When i try to install i got the message "setup unable to create a new system partition or locate an existing one". How do I fix this?
View 9 Replies
View Related
Aug 4, 2010
This is a fresh Windows 7 install on a 500GB HDD (previously used under XP) In the BIOS the Storage is configured as: Raid. Obviously I have the right raid ICH10R drivers from Asus (they are on a USB drive) Installation starts, Windows sees the disk, I specify the drivers, BUT when I click Next, I get: Setup was unable to create a new system partition. I can delete the partition, create a new one, format it, BUT when I click Next, I get: Setup was unable to create a new system partition. I used Gparted to delete the partition, and tried again - I used Seagate tools to zero the disk (sort of low level format) - If I try to install on a brand new 1TB HDD following the same steps, it installs fine... Both drives are Sata II and I used the same Sata port (only one disk at a time)
View 2 Replies
View Related
Aug 29, 2009
Clean install of windows 7 on 2 160gb sata HDD's set up for a raid 0
when i select a partition to install the OS onto it gives me the error
"Setup was unable to create a new system partition or locate an existing system partition. see the Setup log files for more information."
any suggestions?
View 5 Replies
View Related
Dec 24, 2012
Yesterday i want to install windows 7 on my laptop but when i format Local disk C and click next it says setup was unable to create a new system partition.I boot through Pen Drive. I dont have a dvd rw(not working) and i have Data on other drives[/COLOR]...without wiping data and with wiping data.
View 9 Replies
View Related
Oct 27, 2012
So i'm trying to do a clean install on windows 7, i've tried to format and then do the install but it still says setup was unable to create a new system partition
View 14 Replies
View Related
May 4, 2009
When I try and install Windows 7 64-bit on my hard drives I get the fallowing error.
Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information.
Its doing this with vista now.
View 9 Replies
View Related
Nov 5, 2011
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
View 3 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
View 9 Replies
View Related
Sep 8, 2009
I have two identical sata drives. They were previously configured at raid 0 so
reset and removed the raid config in my bios. I have a Asus p5wd2 Premium mobo.
When I try to install I get this error message
"Setup was unable to create a new system partition or locate existing system partition"
I also do not see my other sata drive detected In Win 7 set up.
I tried to load some drivers from disk and from usb but it says no signed drivers were found. I am also unsure what drivers I need.
View 2 Replies
View Related
Nov 21, 2012
I am having a problem with installing Windows 7 on my netbook (Novero Solana). I did a clean install (wiped out Windows 8) and when using a USB boot install of Windows 7, I encountered the following error (Disk 0 Unallocated Space): "Windows 7 install Error "Setup was unable to use existing system partition because it does not contain the required free space". The other partition on my netbook is System Reserved (Disk 0 Partition 1: System Reserved), but I don't want to touch it, as I have heard it contains important files e.g. bootup. Attached is the screenshot of the "Install Windows" screen displaying the partitions.
View 2 Replies
View Related
Jun 4, 2009
whenever i try to install win 7 rc1 64bit on a freshly "formatted" partition (as windows doesn't seem to fully format them prior to selecting them) i get the above error message
i am running on a GA-M55plus-S3G
2 samsung spinpoint sata hardrives and an athlon x2 64 4200+
edit: okay so what i did now was to install an older IDE hard drive and create a new partition on there
it created 2 partitions in total
one was 100MB in size and labelled as system partition the other was the rest of the disk size (it's a 200GB WD caviar) i could start installing win 7 on the larger partition without problems
it's not the best solution as i wanted to run Windows 7 with a raid0 sata array with a new drive i am about to buy but i guess i'll have to bear for now.
View 9 Replies
View Related
Dec 18, 2012
I recently put together my first build and am currently trying to install Windows 7 onto it.
My school offers Windows OS for free so I downloaded a .iso file of Windows 7 Professional 64-bit onto a USB drive.it starts up just fine, leads me to install Windows, agree to terms, but when I go to set up the drive it gives me the message, "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
View 19 Replies
View Related
Oct 19, 2012
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies
View Related
Jul 30, 2012
I am unable to install windows 7 as , when I start the install and click on install it shows that setup was unable to create a new partition or locate an existing system partition.I have 2 hard disks , one of size 75 gb & other of 320 Gb..Previously , OS was installed on 320 gb , but i have formatted that drive before installing windows 7...
now my 75 gb hard disk is empty & one drive of 320 gb is also empty..It shows that 320 gb hdd ia on disk 0 & 75 gb on disk 1.I want to install Os in any of the above mentioned HDD.It shows that-> 1. all drives of 320 gb HDD as Logical & 75 gb HDD drives as Primary..
View 9 Replies
View Related
Sep 9, 2012
while installing windows 7 from the installation DVD, everything works fine till the screen where it asks me to select the partition on which i would like to install Windows. When I select Partition 4 and click Next it gives me an error saying "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have only one HDD and no external USB's or drives attached to my CPU.
View 5 Replies
View Related
May 5, 2009
I'm getting this error when trying to install windows 7 rc x64:
"Setup couldn't create new system partition"
Then it asks me to check the setup log, but I don't know how.
Trying to install onto the 2nd partition of a 160 gb drive, split in half. It's disk 0, the first partition is active primary and has XP. The second partition is formatted ntfs primary and when I select it in windows setup, that's when I get the error message. I let windows 7 delete it and create a new partition and formatted it, but when I select it to install windows onto, it give me the above message.
It's a SATA drive running in native IDE mode on an AMD790GX board with a Phenom II X4 940 and 4 GB RAM.
It doesn't seem like it would be a drivers issues, since Windows sees the drive and both partitions, allows me to delete, create and format partitions, just won't let me install onto it. Any ideas?
View 5 Replies
View Related
Jan 16, 2013
I tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
View 10 Replies
View Related
Nov 11, 2011
I have made a reformat on my hdd to install Win 7. But during install this message comes" Setup was unable to create a new system partiton or locate an exsisting system partiton" And if I start my computer without a DVD this message comes in the end "BOOTMGR IS MISSING"
View 1 Replies
View Related
Mar 27, 2011
After 8 long years I've finally upgraded my wheezy old pc, and now am drooling to play with this beastly new machine I've just assembled. My system specs should be in my sig below.But after 12 long hours of trying to install windows 7 pro, I'm more kinds of frustrated than there are words for.As in the topic title, I'm up against the "setup cannot find or create a system partition" error. My machine has a single 2 TB Hitachi Sata 3 hard drive, so there is no raid to muck things up, which seems to have been the primary cause of everyone elses troubles with this error. Using my old rig, I partitioned the new drive and transferred all the data from the old drives, leaving the first 75 GB partition empty and waiting for windows 7.
Then "the troubles" began. Research ensued.First thing I tried was to load updated sata 3 drivers from the mobo install disk. No help.Then I tried downloading the latest drivers from Asus and loading them from a flash drive during installation. No dice.Then I tried changing bios settings from Sata to IDE. No dice.Tried all of the above again with minor tweaks. Using the setup tools, I deleted that first partition and tried to make it again but setup gives me the title error.Well, of course I need that partition back so after some more research, I downloaded gparted, booted it up, but the video output is messed up and impossible to read.Then I slept for 6 hours. I woke up, tenacious and desperate, and figured I'd try diskpart (well above my paygrade) to make the first partition active and/or primary. Diskpart won't allow it? I disassembled my new system, plonked the old system back into the case, booted up into winxp off the old hard drive and with Easus partition manager and tried the same thing as with diskpart, but with the same results. No dice.Then, clearly somewhat crazy at this point, I put the new machine back in the case and tried ALL OF THE ABOVE AGAIN. No dice.Upon boot, POST sees the hard drive, but its not detected in bios. I don't know whether this is a hard drive problem, a mobo problem, a configuration problem, or completely normal for my gear. In any case, windows setup lists all the partitions.
View 5 Replies
View Related
Aug 15, 2012
I'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
View 3 Replies
View Related
Oct 13, 2012
My driver are combined into one drive. I install my os too. I need a tool to partition that drive.
View 3 Replies
View Related
Sep 19, 2012
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
Oct 25, 2012
Ive bought A lenovo g580(?) with 7 pre installed. There is four partitions preinstalled on the hdd. I've understod that You can not delete any of these, in order to keep the recovery system working. Four partitions is the Max number of such.Is it possible to Get an extra data partition?If not, should i store my user data on c? What if win7 crashes,then i Will loose everything on c
View 9 Replies
View Related
