"Setup Was Unable To Use Existing System Partition Because It Does Not Contain The Required Free Space"
Nov 21, 2012
I am having a problem with installing Windows 7 on my netbook (Novero Solana). I did a clean install (wiped out Windows 8) and when using a USB boot install of Windows 7, I encountered the following error (Disk 0 Unallocated Space): "Windows 7 install Error "Setup was unable to use existing system partition because it does not contain the required free space". The other partition on my netbook is System Reserved (Disk 0 Partition 1: System Reserved), but I don't want to touch it, as I have heard it contains important files e.g. bootup. Attached is the screenshot of the "Install Windows" screen displaying the partitions.
View 2 Replies
ADVERTISEMENT
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jul 24, 2011
I am unable to install windows 7 whenever I try to install I get this error: "Setup was unable to use existing System partition because it does not contain the required free Space."
View 7 Replies
View Related
Jul 15, 2010
So I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
View 4 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Jun 8, 2011
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
Aug 13, 2012
Last night after 8 hours of toil, I finally completed a clean install using a usb drive on my asus ux32vd using the brand new SSD drive I had just bought. The reason it took so long was I kept getting this error -> "Setup was unable to create a new system partition or locate an existing system partition." What I did to finally get it to install was get to the c prompt during the installation and run diskpart and make the integrated 32GB SSD 'offline' and then I selected the SSD and used the 'clean' command and left the SSD unpartitioned and raw. I had read that with SSDs on a clean install you should leave it raw and windows will install on it. And it worked. Now here's problem number 2, which feels worse than problem number 1. After installing everything went swimmingly. I started updating drivers, etc. I got to the point where I needed to do a Windows Update. There were 91 things that needed to be updated/installed. So I ran update with all 91 and that went fine until it went to restart - it wouldn't boot into windows. Instead it kept going into that startup restoration program over and over saying it couldn't fix the problem. I tried to delete the updates manually through cprompt by running dism, but this failed and I figured to hell with the hassle I'll just reinstall Windows since I know how now and then update windows one update at a time. BIG MISTAKE. I tried doing EXACTLY what I had done before - doing diskpart, offlining the integrated SSD, etc - however this time the error isn't going away. It's still saying "Setup was unable to create a new system partition or locate an existing system partition." I don't get it. I'm doing exactly what I did when I got it to work, but it's not working now. I can only surmise that the system is still recognizing the integrated SSD somehow.
View 9 Replies
View Related
Aug 13, 2012
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
View 4 Replies
View Related
Dec 27, 2009
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.
View 9 Replies
View Related
Dec 6, 2012
Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"
I've tried to do some procedures, but also can not create partition, do not know what else to do.
View 3 Replies
View Related
Jan 27, 2012
I built a new pc and i want to put windows 7 pro on it. When i try to install i got the message "setup unable to create a new system partition or locate an existing one". How do I fix this?
View 9 Replies
View Related
Aug 4, 2010
This is a fresh Windows 7 install on a 500GB HDD (previously used under XP) In the BIOS the Storage is configured as: Raid. Obviously I have the right raid ICH10R drivers from Asus (they are on a USB drive) Installation starts, Windows sees the disk, I specify the drivers, BUT when I click Next, I get: Setup was unable to create a new system partition. I can delete the partition, create a new one, format it, BUT when I click Next, I get: Setup was unable to create a new system partition. I used Gparted to delete the partition, and tried again - I used Seagate tools to zero the disk (sort of low level format) - If I try to install on a brand new 1TB HDD following the same steps, it installs fine... Both drives are Sata II and I used the same Sata port (only one disk at a time)
View 2 Replies
View Related
Aug 29, 2009
Clean install of windows 7 on 2 160gb sata HDD's set up for a raid 0
when i select a partition to install the OS onto it gives me the error
"Setup was unable to create a new system partition or locate an existing system partition. see the Setup log files for more information."
any suggestions?
View 5 Replies
View Related
Dec 24, 2012
Yesterday i want to install windows 7 on my laptop but when i format Local disk C and click next it says setup was unable to create a new system partition.I boot through Pen Drive. I dont have a dvd rw(not working) and i have Data on other drives[/COLOR]...without wiping data and with wiping data.
View 9 Replies
View Related
Oct 27, 2012
So i'm trying to do a clean install on windows 7, i've tried to format and then do the install but it still says setup was unable to create a new system partition
View 14 Replies
View Related
May 4, 2009
When I try and install Windows 7 64-bit on my hard drives I get the fallowing error.
Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information.
Its doing this with vista now.
View 9 Replies
View Related
Nov 5, 2011
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
View 3 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
View 9 Replies
View Related
Nov 19, 2009
I have a smooth running Windows 7 system. I want to convert it to a Raid 1 system. I have a ASUS Rampage Formula motherboard with a Intel X48 chipset and ICH9R installed. It has 4gb memory, Core 2 Quadand a WD 640 gb drive. I have purchased another WD 640 to setup the Raid 1 array. I cannot find anyone who has installed it on a running system, they all build a new system. Can you install Rain 1 on a running system? If so how do you do it?
View 14 Replies
View Related
Apr 20, 2011
I have installed 7 SP1 32bit on my Dell Inspiron 1520. My installation drive C is totally 18.5 Mb and have 4.5 M.b free space. Is that enough free space or should I increase the size of the drive ?
View 2 Replies
View Related
Dec 31, 2012
I bought a 3TB hard drive for my gf and did a fresh install of Windows 7. When I was creating the first partition the Win7 install auto created two more volumes, both labeled as Unalloated. I thought nothing of it as I figured I would be able to merge/create my second partion with the remaining space once Windows was up and running. However, to my dimay I can not create a partition on one of those random Unallocated volumes. I've tried to delete all partition but the one that my OS is running on and I've tried to create two then merger but when I right-click on the second (first one works) volume the option t create a simple volume is greyed out.
View 7 Replies
View Related
Aug 14, 2011
New to the forums and need some help here as I'm lost. I just got my new laptop and noticed that the C drive (O/S) was getting full and wanted to add more space. I deleted the recovery partition of 25GB so I could extend my C partition.
However, I do not have the option to expand my C drive, see the print screen link below:
I also tried using minitool partition wizard which looked to be successful but upon reboot I got an error.
View 9 Replies
View Related
Mar 10, 2011
I recently (~2-3 months ago) installed windows 7 on a brand new 1TB hard drive. This hard drive is broken into two partitions - C & G. Windows 7 is installed on C; and G is only for data storage etc. Here is the description of partition C from Disk Management:
C: Simple Basic NTFS Healthy (Boot, Page File, Active, Crash Dump, Primary Partition) 98 GB
Unfortunately, "System" is missing from that description. Somehow "System" ended up on hard drive L - an old 80GB IDE drive that has migrated from build-to-build. This drive has just started on the *hopefully* slow road to death. I decided to retire this drive when I discovered I couldn't securely erase it because it is the System partition (there is only one partition on this drive).
So, how I can relocate the system drive data to another drive (preferably C) in the safest way possible. I found a solution here: [URL]. But I don't want to copy the entire contents of L to a new drive, all I want is the data needed for booting, and to securely erase everything else on L. Looking around, it seems I may be able to boot from a Windows 7 repair disk and recreate the system files on C, but this seems risky and likely to require a full re-install if something goes wrong.
View 4 Replies
View Related
Oct 20, 2012
in my lenevo laptop I had 4 drives, but Partition disappeared while in use... now shows as free space? How to recover my data...
View 1 Replies
View Related
Jun 26, 2011
I have a partition set at 237 GB. I have 161 GB of free space left and want to move more out of the partition. But it would not let me move more out. Is this a bug or something?
View 2 Replies
View Related
Feb 19, 2013
there is a free space partition on the hard disk got created which i am not able to use it can't be located on the drive also please provide any suggestion
View 1 Replies
View Related
Mar 12, 2011
My mom got her laptop from Best Buy, and it came with Geek Squad optimization. They made it so the C: drive is around 58GB, and the D: is the other GBs which add up to 500GB. She is practically out of room on her C: and the computer is almost unusable. I already deleted the D: partition, but the partition manager in Windows 7 won't let me extend the partition to fill up all of the space. The option to extend it is just grayed out.
View 2 Replies
View Related
Jul 30, 2012
I am unable to install windows 7 as , when I start the install and click on install it shows that setup was unable to create a new partition or locate an existing system partition.I have 2 hard disks , one of size 75 gb & other of 320 Gb..Previously , OS was installed on 320 gb , but i have formatted that drive before installing windows 7...
now my 75 gb hard disk is empty & one drive of 320 gb is also empty..It shows that 320 gb hdd ia on disk 0 & 75 gb on disk 1.I want to install Os in any of the above mentioned HDD.It shows that-> 1. all drives of 320 gb HDD as Logical & 75 gb HDD drives as Primary..
View 9 Replies
View Related
Sep 9, 2012
while installing windows 7 from the installation DVD, everything works fine till the screen where it asks me to select the partition on which i would like to install Windows. When I select Partition 4 and click Next it gives me an error saying "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have only one HDD and no external USB's or drives attached to my CPU.
View 5 Replies
View Related
Jan 16, 2013
I tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
View 10 Replies
View Related