Unable To Install Windows 7 - Partition Does Not Contain Required Free Space
Jul 24, 2011
I am unable to install windows 7 whenever I try to install I get this error: "Setup was unable to use existing System partition because it does not contain the required free Space."
View 7 Replies
ADVERTISEMENT
Nov 21, 2012
I am having a problem with installing Windows 7 on my netbook (Novero Solana). I did a clean install (wiped out Windows 8) and when using a USB boot install of Windows 7, I encountered the following error (Disk 0 Unallocated Space): "Windows 7 install Error "Setup was unable to use existing system partition because it does not contain the required free space". The other partition on my netbook is System Reserved (Disk 0 Partition 1: System Reserved), but I don't want to touch it, as I have heard it contains important files e.g. bootup. Attached is the screenshot of the "Install Windows" screen displaying the partitions.
View 2 Replies
View Related
Dec 27, 2009
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.
View 9 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
Apr 20, 2011
I have installed 7 SP1 32bit on my Dell Inspiron 1520. My installation drive C is totally 18.5 Mb and have 4.5 M.b free space. Is that enough free space or should I increase the size of the drive ?
View 2 Replies
View Related
Mar 12, 2011
My mom got her laptop from Best Buy, and it came with Geek Squad optimization. They made it so the C: drive is around 58GB, and the D: is the other GBs which add up to 500GB. She is practically out of room on her C: and the computer is almost unusable. I already deleted the D: partition, but the partition manager in Windows 7 won't let me extend the partition to fill up all of the space. The option to extend it is just grayed out.
View 2 Replies
View Related
Dec 31, 2012
I bought a 3TB hard drive for my gf and did a fresh install of Windows 7. When I was creating the first partition the Win7 install auto created two more volumes, both labeled as Unalloated. I thought nothing of it as I figured I would be able to merge/create my second partion with the remaining space once Windows was up and running. However, to my dimay I can not create a partition on one of those random Unallocated volumes. I've tried to delete all partition but the one that my OS is running on and I've tried to create two then merger but when I right-click on the second (first one works) volume the option t create a simple volume is greyed out.
View 7 Replies
View Related
Aug 14, 2011
New to the forums and need some help here as I'm lost. I just got my new laptop and noticed that the C drive (O/S) was getting full and wanted to add more space. I deleted the recovery partition of 25GB so I could extend my C partition.
However, I do not have the option to expand my C drive, see the print screen link below:
I also tried using minitool partition wizard which looked to be successful but upon reboot I got an error.
View 9 Replies
View Related
Oct 20, 2012
in my lenevo laptop I had 4 drives, but Partition disappeared while in use... now shows as free space? How to recover my data...
View 1 Replies
View Related
Jun 26, 2011
I have a partition set at 237 GB. I have 161 GB of free space left and want to move more out of the partition. But it would not let me move more out. Is this a bug or something?
View 2 Replies
View Related
Feb 19, 2013
there is a free space partition on the hard disk got created which i am not able to use it can't be located on the drive also please provide any suggestion
View 1 Replies
View Related
Apr 27, 2012
i have what I consider a major problem with my desktop pc, the usuall thing happened switched mine off last night, today will not boot up, I have tried the usual repairs, tried to use the system held repair, unable to get the pc to load, I have tried to complete a new install but every one of my 3 hard drives comes up with the same thing "unable to install not enough space on chosen drive", I am completely stumped.
View 2 Replies
View Related
Sep 7, 2012
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
View 4 Replies
View Related
Jan 15, 2013
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
View 2 Replies
View Related
May 15, 2012
With Windows 7 I can't seem to figure out how much disk space i will need or tailor the selection for backup, I am using a HP utility...
View 8 Replies
View Related
Jan 16, 2013
I tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
View 10 Replies
View Related
Mar 29, 2012
I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk.
View 3 Replies
View Related
Oct 23, 2009
I've seen the upgrade requirements to upgrade from Vista 64 to Windows 7 64 and they call for 20GB of free hard drive space. Is this REALLY necessary? I currently have 9.47GB free right now, but can probably get that down a few gig more. Has anyone been able to upgrade with less than 20GB? Like others, I normally am a proponent of clean installs, but thought that I would give an upgrade install a try in order to not have to re-install everything that I already have installed. Vista 64 is running fine for me, but I really wanna get up to Windows 7. I'm interested to hear what others have experienced. Depending upon the feedback here, I may uninstall some STEAM games and then use a partitioning tool to rearrange my hard drive partitions to make the upgrade work. I have already backed up a majority of the files that I do not want to lose and will also do a FULL backup so that I can do a full restore in the event of catastrophic upgrade failure.
View 9 Replies
View Related
Sep 19, 2012
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies
View Related
Dec 3, 2009
I am working on windows 7 (64 bit ) . Can i have Ubuntu installed in another partition ? I tried to install ubuntu but unable to complete the process. Is it because Ubuntu works only on 32 bit ? or the installation CD corrupted ?
View 4 Replies
View Related
Dec 22, 2011
I'm using a Asus G60VX-RBBX05, and I'm trying to perform a clean install with its recovery partition, but F9 just takes me to the startup repair without the option of reinstalling. My dvd is corrupted due to moisture. A previous image and backup doesn't exist btw.
View 10 Replies
View Related
Dec 1, 2009
I'm trying to install Windows 7 Professional on a system with the 2nd hard drive partition - 100GB in size. I used Paragon Partition Manger to create the two partitions, formatting both as NTFS.
Windows XP isproperly installed on the first partition. When I try to install Windows 7 Pro on the second partition it extracts the files & installs fine right up to the point of rebooting, then gives me this error on rebooting:
File: windowssystem32winload.exe
Status: 0xc000000d
The selected entry could not be loaded because the application is missing or corrupt.
I've purchased four Win 7 Pro license keys from MS and already sucessfully loaded Windows 7 Pro on three computers with a single partition HDD, using the DVD (downloaded from digitalrivers) w/o any problems - so one would think the DVD itself is OK.
Any ideas why I can install Windows 7 Pro (using the same DVD) just fine on a single (simple) partition but get this error when trying to install on a seperate partition?
View 3 Replies
View Related
Jul 1, 2010
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
View 9 Replies
View Related
Nov 5, 2011
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
View 3 Replies
View Related
Jan 3, 2012
I want to upgrade a laptop from XP to 7. My current XP does not have the required 16GB in one partition, rather than getting a new drive I was going to eliminate the D partition as it is not used. What is the best way to do that? Do I need other software to increase the C partition from the deleted D partition or will windows 7 be able to expand the C partition?
View 4 Replies
View Related
Aug 12, 2012
I have Win7 installed as my OS. In my desktop I have 2 different physical hard-drives. First one is 40 GB which is whole C-Drive without any partitions. Now the other hard-drive is having capacity of 500 GB, which I had divided into 4 partitions namely D, E, F (each 100 GBs) and the last one is G-Drive with 200 GBs capacity. Now, 2 days back I had used Win 7's inbuilt Disk Management tool and had shrunk my D-Drive by 15 GBs. Hence, I had got a new partition with 15 GBs capacity which I named as Z-Drive (just to recognise it very easily).
Today my work was over and I had no need for that Z-Drive anymore so I just explored 'My Computer and formatted Z-Drive using right-click context menu. After formatting Z-Drive I started Disk Management tool. I just right-clicked Z drive and clicked 'delete volume' so that I may get that much space as 'Unallocated' and then I would again extend the D-Drive (or so I thought). But when I deleted my Z-Drive, don't know how but G-Drive also got deleted along with it and now both Z and G drives are shown by green color in Disk Management tool and they are showing their capacity (15 GBs and 200 GBs respectively) as free space!
I have a lot of crucial and important data and files on G-Drive. How this G-Drive got deleted automatically along with Z-Drive?? And I haven't formatted G-Drive, are my files and data still present on G-Drive? After all this I right clicked 200 GBs partition (G-Drive) and selected 'New Simple Volume' and followed the steps accordingly (I had checked 'Do not format partition' while creating 'New Simple Volume on that green colored 200 GBs space) but this tool waits for 3-4 minutes and gives error message as "The operation failed to complete because the Disk Management console is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer".
I had refreshed and restarted the computer several times after that and tried to create that 'New Simple Volume' but every time the same error-message pops up. Is my data still safe on that 200GBs space (as I had checked 'Do not format partition' while creating 'New Simple Volume')? How I can convert that 200 GBs space into G-Drive? I have a lot of important data and files on G-Drive!
View 5 Replies
View Related
Jun 26, 2011
It will get as far as "expanding files" then stop at 0%, with an error saying "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation." I have tried it with multiple iso burns on different dvds from the download I got of it, redownloading it from the official downloader, and now have tried the dvd that came in the mail, to no avail.
View 2 Replies
View Related
Jan 2, 2011
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
View 4 Replies
View Related
Jul 1, 2012
When I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
View 4 Replies
View Related
Mar 10, 2011
I recently (~2-3 months ago) installed windows 7 on a brand new 1TB hard drive. This hard drive is broken into two partitions - C & G. Windows 7 is installed on C; and G is only for data storage etc. Here is the description of partition C from Disk Management:
C: Simple Basic NTFS Healthy (Boot, Page File, Active, Crash Dump, Primary Partition) 98 GB
Unfortunately, "System" is missing from that description. Somehow "System" ended up on hard drive L - an old 80GB IDE drive that has migrated from build-to-build. This drive has just started on the *hopefully* slow road to death. I decided to retire this drive when I discovered I couldn't securely erase it because it is the System partition (there is only one partition on this drive).
So, how I can relocate the system drive data to another drive (preferably C) in the safest way possible. I found a solution here: [URL]. But I don't want to copy the entire contents of L to a new drive, all I want is the data needed for booting, and to securely erase everything else on L. Looking around, it seems I may be able to boot from a Windows 7 repair disk and recreate the system files on C, but this seems risky and likely to require a full re-install if something goes wrong.
View 4 Replies
View Related
Aug 18, 2012
I have searched high and low for a solution to this problem. I am running Windows 7. This error pops up in a window titled "fatal error" - "Unable to create an instance of required object". It happens in Firefox (14.0.1) and Word (Office 2010) usually when I'm trying to save or download a file. It then crashes the program and sometimes my entire computer.I've found tons of old references to problems relating to Allaire Homesite, but the page that windows support sends you to a Macromedia page that no longer exists as they were purchased by Adobe. At one point in the last year, I had started to install Homesite 5 but wasn't successful as I could not find my serial number. But that was long ago and this error just started happening now.
View 2 Replies
View Related