I bought a 3TB hard drive for my gf and did a fresh install of Windows 7. When I was creating the first partition the Win7 install auto created two more volumes, both labeled as Unalloated. I thought nothing of it as I figured I would be able to merge/create my second partion with the remaining space once Windows was up and running. However, to my dimay I can not create a partition on one of those random Unallocated volumes. I've tried to delete all partition but the one that my OS is running on and I've tried to create two then merger but when I right-click on the second (first one works) volume the option t create a simple volume is greyed out.
Yesterday I tried making partitions in my hard disk, and I failed Here's what I did:
1. run compmgmt.msc
2. Shrink C: drive
3. my hard disk' capacity shrunk from 451GB to 260GB
4. an error window appeared ("I/O device error" I think)
5. it left me no unallocated space to create partition
using compmgmt I can't extend my hdd back to 451GB, so I used MiniTool partition wizard to restore it (btw, shrinking with MT PartitionWiz resulted the same, no unallocated space)
I have 500 GB harddisc on my laptop with three partitions. I wanted to split the 400gb into 300 + 100 GB. So, I went to disc management and shurnk the volume to 300GB. I saw 100GB unallocated space. But, when I try to create a new partition with that unallocate space, I get a message that 'media not writable' and the 100gb remains unallocated. I have used a software called 'MiniTool Partition Wizard Home Edition'. But, it couldn't apply the changes either.
how can I create a new partition with my 100gb unallocated space.
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
New to the forums and need some help here as I'm lost. I just got my new laptop and noticed that the C drive (O/S) was getting full and wanted to add more space. I deleted the recovery partition of 25GB so I could extend my C partition.
However, I do not have the option to expand my C drive, see the print screen link below:
I also tried using minitool partition wizard which looked to be successful but upon reboot I got an error.
my pc hard disc is 0f 500 GB.....the problem is that when i go to disk management option there is no unallocated space...which i can use to create new driveas my c drive is of 451 Gb...how to get unallocated space??
I currently just set up my new build. I decided to go with Western Digital Caviar Green 3TB for my hard drive. However, I split the hard drive into two parts: 2 TB and roughly about 770 GB unallocated space. I installed Window 7 on 2TB partition. Now, I decide to use the rest of 770 GB of unallocated space. I tried to use Computer Management, but it doesn't give me the option to create a new volume from unallocated space. Similar thing happened with EaseUS Partition Master. With Acronis Disk Director, it doesn't even recognize the unallocated space at all!!! So how can I create a new volume or even merge it with my C drive? Do I have to reformat my hard drive and split them again and do a clean installation again?
Note:I already checked, my BIOS recognizes my hard drive with 3 TB. The unallocated space is right after my C drive. There is only 1 primary MBR partition (C drive), and 100 MB system files right before it.
When I run out of disk space and Disk Cleanup only removes small amount of MB, can I expand my C: partition? Because I have 200 GB unallocated space on my HDD and it's unused.
Previously my machine was dual-booting Windows 7 and Ubuntu. It worked fine with no problems until I decided that I didn't use nor want Ubuntu on my machine. Disk space was getting low for my primary partition and I decided it was time to let Ubuntu go. Anyhow long story short I cleared the two partitions that Ubuntu was using through the 'disk management' tool in windows. I didn't think at the time that GRUB would be stored within these partitions and that lead to the problem of being unable to boot anything.
I made and used a repair disc via another machine and then restored the bootsector code with it. That fixed the problem of being unable to boot. Now my problem is that I'm left with around 3-4 GB of wasted space in a partition. I was wondering if this 3-4 GB could be added to my primary storage partition? I've looked everywhere in the disk manager but I can't find anything there. I'm unsure as to if there is some 3rd party software available that could fix this? That 70GB partition shall remain undisclosed.
I read up a bit on this on other threads but none of them are exactly specific to my issue.I need to expand my C partition by utilizing the free unallocated space on disk D (a separate disk) that I just made by deleting the only partition on there.I guess this is not possible through windows disk management tools but I didn't want to start downloading any 3rd party software for this before I got some guidance from here. lease take a look at the following screen and let me know if using the 238.38GB of unused (unallocated space) I can extend the C partition without having to delete that partition, having to backup the files on it or making images. I already backed up everything I had on the D partition and then went ahead and deleted it through the computer management tool.
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.
I am unable to install windows 7 whenever I try to install I get this error: "Setup was unable to use existing System partition because it does not contain the required free Space."
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
Ive bought A lenovo g580(?) with 7 pre installed. There is four partitions preinstalled on the hdd. I've understod that You can not delete any of these, in order to keep the recovery system working. Four partitions is the Max number of such.Is it possible to Get an extra data partition?If not, should i store my user data on c? What if win7 crashes,then i Will loose everything on c
Ive bought A lenovo g580(?) with 7 pre installed. There is four partitions preinstalled on the hdd. I've understod that You can not delete any of these, in order to keep the recovery system working. Four partitions is the Max number of such.Is it possible to Get an extra data partition?If not, should i store my user data on c? What if Windows 7 crashes,then i Will loose everything on c
I am unable to install windows 7 as , when I start the install and click on install it shows that setup was unable to create a new partition or locate an existing system partition.I have 2 hard disks , one of size 75 gb & other of 320 Gb..Previously , OS was installed on 320 gb , but i have formatted that drive before installing windows 7...
now my 75 gb hard disk is empty & one drive of 320 gb is also empty..It shows that 320 gb hdd ia on disk 0 & 75 gb on disk 1.I want to install Os in any of the above mentioned HDD.It shows that-> 1. all drives of 320 gb HDD as Logical & 75 gb HDD drives as Primary..
I'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
I built a new pc and i want to put windows 7 pro on it. When i try to install i got the message "setup unable to create a new system partition or locate an existing one". How do I fix this?
This is a fresh Windows 7 install on a 500GB HDD (previously used under XP) In the BIOS the Storage is configured as: Raid. Obviously I have the right raid ICH10R drivers from Asus (they are on a USB drive) Installation starts, Windows sees the disk, I specify the drivers, BUT when I click Next, I get: Setup was unable to create a new system partition. I can delete the partition, create a new one, format it, BUT when I click Next, I get: Setup was unable to create a new system partition. I used Gparted to delete the partition, and tried again - I used Seagate tools to zero the disk (sort of low level format) - If I try to install on a brand new 1TB HDD following the same steps, it installs fine... Both drives are Sata II and I used the same Sata port (only one disk at a time)
while installing windows 7 from the installation DVD, everything works fine till the screen where it asks me to select the partition on which i would like to install Windows. When I select Partition 4 and click Next it gives me an error saying "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have only one HDD and no external USB's or drives attached to my CPU.
Yesterday i want to install windows 7 on my laptop but when i format Local disk C and click next it says setup was unable to create a new system partition.I boot through Pen Drive. I dont have a dvd rw(not working) and i have Data on other drives[/COLOR]...without wiping data and with wiping data.
So i'm trying to do a clean install on windows 7, i've tried to format and then do the install but it still says setup was unable to create a new system partition
I have a set up with one SSD for windows 7 x64 and two Seagate Barracuda Green ST1500DL003 1.5TB HDD 3.5"
Without raid0 all is going well, when I raid0 the two Barracuda I have better performance but I have a huge unallocated space of 746.53 GB On Windows 7 disk management the I do not have any option for the unallocated space, as all options are grey out when I right click.
When I log off windows and delete the raid0, I can see all 2795 MB of the space, if I raid them again I end up with 746 GB space which I cannot add as a simple volume nor expand the other volume.
I just recently purchased a new internal hard drive, which will be used as storage alongside my main hd, and for some reason it has two unallocated spaces (see picture).I've looked around the forums and tried creating the partition on the first unallocated space and trying to extend it but the option isn't shown.
I'm using windows 7 home basic 32 bit.For some reasons I need to reinstall it a few weeks ago.At the time of installation I deleted 'system reserved' & 'local disk C' partitions & install new version of windows.After installation there is 3mb unallocated space.