I'm using a Asus G60VX-RBBX05, and I'm trying to perform a clean install with its recovery partition, but F9 just takes me to the startup repair without the option of reinstalling. My dvd is corrupted due to moisture. A previous image and backup doesn't exist btw.
View 10 RepliesI had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies View RelatedI am sure this has been asked before, but I need to know if I get the upgrade disk and for whatever reason I have to do a clean install again, will the upgrade disk do that or will I have to load Windows XP back on then use the upgrade disk from there?
View 3 Replies View RelatedI originally did the upgrade install of Windows 7 from Vista to Windows 7. I am seeing that I now am running "ChkDsc" every time that my computer is shut down. I was told that I would be better off to do a clean install and reinstall programs and files. Can I do a clean install with my upgrade disc, or will I be creating additional problems ?
View 5 Replies View RelatedRecently my PC's registry became corrupted, leaving me unable to boot. As I really want to keep my files, programs, settings etc I would much prefer to do an Upgrade install than perform a Custom one and wipe everything.
However, the Windows 7 disk insists I boot into Windows before performing the upgrade installation, which is the one thing I cannot do due to my corrupt registry. Compatibility Report is as follows:
Compatibility Report
The computer started using the Windows installation disk. Remove the installation disk and restart the computer so that Windows starts normally. Then, insert the installation disk and restart the upgrade.
This is a frustrating cycle. I can't boot Windows, so I try to perform an Upgrade Install, which I can't do because I have to boot Windows.
Things I've tried:
- Various chkdsk commands, none of which have worked due to my drive seeming to be write protected
- System restore, which I was unable to do as apparently System Protection must be enabled on the drive and I'm unsurehow to do this
- All of the registry repair tools on Hiren's boot CD, all of which are either irrelevant to the problem or have given me error messages
As I have Hiren's CD I can access my hard drive through Explorer, so would it be possible to use Mini XP to attempt the Upgrade Install? If this isn't possible, how else can I repair my registry?
I'm currently running the 7100 build and I'm wanting to install 7127 using a new partition.
Basically my idea was to create a new partition and install 7127 on that and then uninstall 7100 but keeping my files so I can move then across to the new partition. Thus having a clean install but without losing any files.
Is this possible? Will I be able to uninstall the 7100 without deleting my files?
Also can I change the size of the new partition after I have made it - in order to resemble the set up I have now (ie: 2x 250GB).
before this i have post about my problem on installing Windows 7 on HP notebook. The error is 0x800057(partition Problem), i already got solve with the problem but after few month the problem came back and now i try t o clean format the notebook , using diskpart but still got same erro
View 2 Replies View RelatedI did a new build in Dec last year with Vista Ultimate on a WD 300 GB rapture drive. I partitioned the HD to 60 GB for the "C" drive thinking that I would not install "any" applications on the "C" drive. I would put the apps on the other partitions or another drive altogether. Games on the rapture drive, office productivity apps on another drive.
Apparently, some apps don't give the option to install anywhere else but the C drive. I can accept that but wish I had known that before partitioning.
I also created a "shared" folder on the desktop for moving large files from one networked PC to another. Well it didn't take long before the "C" drive was full. Raw Digital audio files are rather large and attempting to transfer files from one PC to the Vista Ult. PC choked the C drive.
In my next build I'm thinking it may be better to not partition the "C" drive at all. Give the operating system all 300 GB - room to breath for updates, etc.
Does anyone have any words of wisdom, thoughts, comments?
Once you get to the Custom (Advanced) tab of Windows 7 clean install there are options to delete the partition, format, etc. Assuming I want to delete all of my partitions so that I have one large volume C: is it best to delete the partitions first and then format? Why would someone do one over the other (or both?) Right now I have a C: partition and a D:RECOVERY partition. I want to delete the D: partition and combine it to the C: partition.Don't they do the same thing? Why do you need to format after you delete a partition ? Do I also delete the C: partition and "re-create" it? What about the term "Unallocated Space"
View 9 Replies View RelatedI have download windows 7, backed up all my drivers and copied all my important info onto my external Hard drive and am about to try and clean install windows 7.
But do i have to partition the hard drive? My Dell laptop has a 110GB hard drive which came already partitioned. 10GB is called 'Recovery', do i need to do the same and make a larger partition and install Windows 7 or just leave it as it is?
I want to do a clean install of windows 7 but every time the "expanding windows files" part of the installation gets stuck on 14%!
View 9 Replies View RelatedOn my home computer, I have 2 physical drives. One hard drive has a single partition (D:) and the other (newer) drive has two partitions (C: and E:). Unfortunately when I first purchased this computer, the technician mistakenly installed Windows XP onto my older hard drive (D:) rather than installing the OS onto the desired C: drive.
The main problem that I am having is: Can I perform a clean install of Windows 7 onto C: drive even though my current OS (Windows XP) is installed onto D: drive? P.S. I have already backed up all files that exist in all of my partitions and would like to format all of the drives (C, D, and E)
drive spaces: C: = 40gb D: 200gb E: 200g
I have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057
View 3 Replies View RelatedI'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
I currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:
View 11 Replies View RelatedThough it was likely foolish of me to keep putting it off I can no longer run a disk check. The 10 second timer stops itself at 10 and proceeds to the log in screen. Not sure if it's important but my "l" key is broken and I was told that that key being broken may be counting as the "press any key to skip dick check". If that is the issue is there any way around it? And if that isn't it then why won't my disk check continue?
View 3 Replies View RelatedI am working on windows 7 (64 bit ) . Can i have Ubuntu installed in another partition ? I tried to install ubuntu but unable to complete the process. Is it because Ubuntu works only on 32 bit ? or the installation CD corrupted ?
View 4 Replies View RelatedI'm trying to install Windows 7 Professional on a system with the 2nd hard drive partition - 100GB in size. I used Paragon Partition Manger to create the two partitions, formatting both as NTFS.
Windows XP isproperly installed on the first partition. When I try to install Windows 7 Pro on the second partition it extracts the files & installs fine right up to the point of rebooting, then gives me this error on rebooting:
File: windowssystem32winload.exe
Status: 0xc000000d
The selected entry could not be loaded because the application is missing or corrupt.
I've purchased four Win 7 Pro license keys from MS and already sucessfully loaded Windows 7 Pro on three computers with a single partition HDD, using the DVD (downloaded from digitalrivers) w/o any problems - so one would think the DVD itself is OK.
Any ideas why I can install Windows 7 Pro (using the same DVD) just fine on a single (simple) partition but get this error when trying to install on a seperate partition?
I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.
This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.
I am unable to install windows 7 whenever I try to install I get this error: "Setup was unable to use existing System partition because it does not contain the required free Space."
View 7 Replies View RelatedI am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
I tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedI have been running Win 7 and XP Pro in dual boot per Method Two of this tutorial, without any problems.When I tried to install SP1 of Win 7, it crashed and went back to the previous Restore Point which isworking OK for now. BUT--Windows Installer is now broken so I can't install anything from Windows Update,including taking another crack at SP1. Can I clean-reinstall Win 7 on its partition without hosing down XP?After the install I plan to run EasyBCD to re-connect XP to the initial boot menu. Does EasyBCD handle the writing of NST tldr and boot.ini to the right spots? Or do I have to save them somewhere?
View 2 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View Relatedtell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedI have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View Related