Though it was likely foolish of me to keep putting it off I can no longer run a disk check. The 10 second timer stops itself at 10 and proceeds to the log in screen. Not sure if it's important but my "l" key is broken and I was told that that key being broken may be counting as the "press any key to skip dick check". If that is the issue is there any way around it? And if that isn't it then why won't my disk check continue?
View 3 RepliesI just got a new MSI laptop a few days ago. I don't plug in my battery so I can reserve it for when I need it. 1 time I accidentaly unplug the power cord.. When I go to try to perform a disk check checking Automatically fix file system errors and Scan for and attempt recovery of bad sectors.. I reboot my laptop unplugged every usb attached and when it gets to the check menu it automatically cancel it.. what is happening.. I'm not pushing any keys or anything.
View 1 Replies View RelatedAnyways, every time I try to schedule a "Check Disk" it NEVER starts on a restart. I already did the "sfc /scannow" command on the cmd prompt. In fact it said it was UNABLE to fix some problems. I have attached a file of my "SFC scan log". Inside it says it was unable to fix "Chkdsk.exe" Go figure. Alright, just some extra information. I also think my computer is confused of itself . I mean, it seems to not know if its a 64 bit or a 86 bit! I was told to install a hotfix for "Chkdsk.exe" here [URL]. But it did NOT work. I attempted to install both 64 bit AND 86 bit hotfixes, and yes they were both windows 7 (Chkdsk.exe) hotfixes.
My system specs:
- Toshiba Qosmio X505 Laptop-
Windows 7 64bit (Yes it says 64 bit but I've tried to install other kinds of hotfixes for both 64 and 86 bits and none of them worked!)
Intel Core i5
4gb Ram
Nvidia Geforce GTS 360M
As you may see I am connected to the internet but I cannot see the signal bars on the taskbar.my laptop information:Toshiba Satelite M645 S4070Windows 7 Home Premium. 64-bitI also cannot do a system restore of the check disk error i am seeing.below is an image of the results:[CODE]
View 2 Replies View RelatedI have an WD external hard disc,its showing data error (cyclic redundancy check) and its also showing to format the disc.
View 4 Replies View RelatedI'm using a Asus G60VX-RBBX05, and I'm trying to perform a clean install with its recovery partition, but F9 just takes me to the startup repair without the option of reinstalling. My dvd is corrupted due to moisture. A previous image and backup doesn't exist btw.
View 10 Replies View RelatedRecently my PC's registry became corrupted, leaving me unable to boot. As I really want to keep my files, programs, settings etc I would much prefer to do an Upgrade install than perform a Custom one and wipe everything.
However, the Windows 7 disk insists I boot into Windows before performing the upgrade installation, which is the one thing I cannot do due to my corrupt registry. Compatibility Report is as follows:
Compatibility Report
The computer started using the Windows installation disk. Remove the installation disk and restart the computer so that Windows starts normally. Then, insert the installation disk and restart the upgrade.
This is a frustrating cycle. I can't boot Windows, so I try to perform an Upgrade Install, which I can't do because I have to boot Windows.
Things I've tried:
- Various chkdsk commands, none of which have worked due to my drive seeming to be write protected
- System restore, which I was unable to do as apparently System Protection must be enabled on the drive and I'm unsurehow to do this
- All of the registry repair tools on Hiren's boot CD, all of which are either irrelevant to the problem or have given me error messages
As I have Hiren's CD I can access my hard drive through Explorer, so would it be possible to use Mini XP to attempt the Upgrade Install? If this isn't possible, how else can I repair my registry?
I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.
This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.
After running on the main hard drive, is there a log that saves?
View 1 Replies View RelatedSo I try to schedule Disk Check on my C: drive by going to Computer-> Right Click on C: -> go to properties -> Tools -> Error Checking -> Check now ->select both Disk options (1. Automatically Fix file system errors 2. Scan for and attempt recovery of bad sectors). Of course, it tells me that the disk is in use and asks me if I would like to check for disk errors the next time I start my computer. I click yes
View 9 Replies View RelatedHow to Run Check Disk in Windows 7 ?
View 0 Replies View RelatedI ran a disk check today. It seemed to go as normal, but when it finished my windows 7 pc didn't start. I restarted it, and same happened again - checkdisk had apparently been scheduled, ran, and - nothing. Tried restarting several times, but always the same.Hitting any key didn't stop checkdisk. PC won't start in safe mode. Recovery disk doesn't work. Can't get pc started at all.
View 5 Replies View RelatedMy computer rebooted while I slept, so I went and checked the Windows Logs for my System. Found out it was KERNEL-Power but that appears to have also taken our router and my brother's computer so I can safely assume something went wonky with the power.However, I did notice a pair of errors, both occurring a little while before the reboot, for bad blocks on my harddisk. Obviously, I decided to do a disk check.I tried to run the first one on my primary partition, C, and for that had to reboot since it holds Windows. The check ran fine for a few moments, but got stuck on a certain point when processing index (Step 2). Rebooting so it would try again got to the exact same point and was stuck.Currently running on the other partition of my main harddisk. So far so good, but I'll update if that one gets stuck as well.
View 3 Replies View Relatedcan i check everything when i run Disk Cleanup?
View 1 Replies View RelatedHow can I solve the disk check at boost? I have used seagatetool to check disk but the result is PASS, the hard drive had no problem. I have format the disk and reinstalled Windows 7 but disk check still run.
View 6 Replies View RelatedHow to Reset Check Disk to Not Run at Startup ?
View 0 Replies View RelatedMy computer will not get past the file checking screen where it stops the countdown at 1 and does nothing. No matter what I press it won't boot up, it always freezes and does nothing. I went into startup options, and did every diagnostic test there, all came up 100% Ok, that took over 6 hours. And I still can't get past the screen. I have close to 1000 episodes of tv on there, I really don't want to lose everything...
View 3 Replies View RelatedMy PC has decided to do a check disk every time it boots up, what is causing it.
View 5 Replies View RelatedI have been having some weird problems on my laptop. I first did a memtest using memtest86 4.0 and that came up clean. I am now doing a disk check and it was progressing fine till now. the screen says stage 5 of 5 97% (82135612 of 84678825 free clusters processed) for over and hour and the HDD light is no longer on. any advice as to what I should do? I have heard that forcing the system to reboot during a disk check can ruin your system so I don't want to do that.
View 7 Replies View Related'm having problem with windows 7. oftenly the DISK CHECKS appear before startup. i've reformatted my computer 3 times but this disk check problem is still there.
View 9 Replies View RelatedI bought another pc today to replace my current work pc, now here is what it does since i pulled it out the box I have a ASUS CM687 it runs checkdsk every restart on D, which i think is where the recovery is at for the PC, now it trys to do it and says it was unsuccessful, thing is brand new out the box i am trying to understand why is it doing that and then saying there has been a problem trying to scan it then boots right into windows?
View 1 Replies View RelatedHow long does a full disk check take? Just curious so I can plan my time.
View 9 Replies View RelatedI've used the Win 7 built in Disk Defragmenter since day one. Noticed about two months ago that it is not checking C:. It checks the other included drives (an external HDD and a Recovery drive) on schedule. I have tried unchecking and rechecking and changing scheduled times all to no avail. As a workaround I manually analyze the drive...when I remember.
View 5 Replies View RelatedAt the time of updating avg 2011 free version my pc is giving chkdsk error i have tried to uninstall but i could not do it.
View 1 Replies View RelatedI have a drive that is a 15 GB partition on a 80 GB disk. It is an old disk, so could be failing, but action is strange. Other partitions on the drive succsessfully completed the checking disk procedure, but the 15 GB partition is taking an enourmous amount of time for each file after a swift run of the first 300 files. After that, I'm estimating it takes 10 minutes per file and has been running since 11AM yesterday. It is now near 8AM and it is still only at file 781. Is it possible for a failing disk to manifest itself in one partition before the others? Or is there some other possibility that I should examine.
View 4 Replies View RelatedI used to have that annoying check for disk consistency thing when you boot up so I just let it go and afterwards now programs like Itunes Rhapsody and some other programs just wont open. I click on them and the mouse pointer goes into loading icon like its about to open but then nothing opens.
View 2 Replies View RelatedI have a Toshiba laptop with W7 upgraded to SP1.I noticed that it adds autocheck autochk /r ??C: to the default autocheck autochk * in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession Manager in regedit.Even if I modify it manually to autocheck autochk * it still adds autocheck autochk /r ??C,I don't think this is an administrator issue as my other laptop with W7 SP1 (SP1 included) does not have this problem.
View 9 Replies View RelatedSo i recently added ram to my computer, this is DDR2 RAM, so i took out 2 old sticks that were 1 gig each and put in two 2 gig sticks. Therefore all 4 of my slots are full and i have 6Gigs in total. When i tried to start up my computer i pressed F1 to save the new memory amount (This amount was indeed correct), and my computer rebooted but then stopped at a disk check. I allowed it to run the disk check for about 10-15 seconds. In this short amount of time it was displaying a bunch of corrupted files and attempting to resolve them i am guessing, but suddenly my computer restarted around 5 times in a row in 5-10 second intervals then i got the error saying: 2233 - HECI error during MEBX execution. ME BIOS Extension Module halted. Update BIOS or ME Firmware if problem persists.I have only found onereference of this on uring-MEBX-execution/td-p/4490533 which seems like it was a faulty motherboard. What i did was i took out the new sticks of RAM and put in the old sticks of RAM and tried my computer again. This time I got all the way to the disk check again and this time i skipped it. Windows started up fine but with some other issues. When i started Google Chrome, it said that my internet explorer.lnk file was corrupted. Also if i tried to reinstall internet explorer, it would fail installation near the end. (by fail i mean i would get a window saying Internet Explorer could not fully install). Next i tried Microsoft excel, and it failed saying i did not have enough memory even though my computer stated i had 6 gigs but 5.7 something usable RAM. I tried word and it instantly "Stopped Working" as windows put it. So i uninstalled microsoft office to try an reinstall it but I rebooted my computer after I uninstalled it.
View 7 Replies View RelatedA couple of weeks ago i started receiving an error on startup saying that Disk C: needed to be checked for constancy, Type of file is NTSF, Cannot open Volume for Direct Access due to a recent software package installation, please use system restore to a point prior to the software installation. There is not a restore point available to access as far back as i need to go. What do i need to do fix this problem??? Plus is there any way to figure out what program is causing this issue, so i can uninstall it??
View 14 Replies View RelatedI wanted to do the checkdisk action for my computer, it fails, and saying I have to use system restore to get rid of a recent software package installation.
View 3 Replies View RelatedWhen my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
View 1 Replies View Related