Check-disk Fails At Windows Startup?
Oct 29, 2012I wanted to do the checkdisk action for my computer, it fails, and saying I have to use system restore to get rid of a recent software package installation.
View 3 RepliesI wanted to do the checkdisk action for my computer, it fails, and saying I have to use system restore to get rid of a recent software package installation.
View 3 RepliesMy computer will not get past the file checking screen where it stops the countdown at 1 and does nothing. No matter what I press it won't boot up, it always freezes and does nothing. I went into startup options, and did every diagnostic test there, all came up 100% Ok, that took over 6 hours. And I still can't get past the screen. I have close to 1000 episodes of tv on there, I really don't want to lose everything...
View 3 Replies View Related'm having problem with windows 7. oftenly the DISK CHECKS appear before startup. i've reformatted my computer 3 times but this disk check problem is still there.
View 9 Replies View RelatedAnyways, every time I try to schedule a "Check Disk" it NEVER starts on a restart. I already did the "sfc /scannow" command on the cmd prompt. In fact it said it was UNABLE to fix some problems. I have attached a file of my "SFC scan log". Inside it says it was unable to fix "Chkdsk.exe" Go figure. Alright, just some extra information. I also think my computer is confused of itself . I mean, it seems to not know if its a 64 bit or a 86 bit! I was told to install a hotfix for "Chkdsk.exe" here [URL]. But it did NOT work. I attempted to install both 64 bit AND 86 bit hotfixes, and yes they were both windows 7 (Chkdsk.exe) hotfixes.
My system specs:
- Toshiba Qosmio X505 Laptop-
Windows 7 64bit (Yes it says 64 bit but I've tried to install other kinds of hotfixes for both 64 and 86 bits and none of them worked!)
Intel Core i5
4gb Ram
Nvidia Geforce GTS 360M
My Windows 7 needs to getting past a blue screen at start-up after I restarted during a slow diskcheck I scheduled. The screen suggests disabling or uninstalling any anti-virus, disk defragmentation or backup utilities. It says to run CHKDSK /F to check for hard drive corruption and then restart the computer. I already tried safe mode but even that gives me the same blue screen. I assume the computer wants me to continue the disk check it started, but how? Restarting doesn't continue the disk check because it's been canceled with ESC. Is there any way for me to enter a command prompt so that I can type CHKDSK /F? I just want to cancel any problems causing this blue screen, whether that means forcing a disk check somehow or turning it off somehow. The stop number is 0x00000024.
View 4 Replies View RelatedI have an WD external hard disc,its showing data error (cyclic redundancy check) and its also showing to format the disc.
View 4 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 240 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 2815 Mb
[code]....
Antivirus: The Shield Deluxe Antivirus, Updated and Enabled DISPLAY MODEL: All I got with it was mouse and power cord On Startup, I get icons for the Administrator and Standard user. Clicking on the Administrator gives me a desktop with an on-screen keyboard; the computer keyboard disabled, and a panel saying,"FAILED, The application has failed to start." Going back and clicking on the Standard User icon gets me running for the most part. Here's the BIG problem. Every time I try to install any program, the User Account Control box drops down and asks for the Administrator Password, plus the question,"Do you want to allow the following programs to make changes to your computer?" You click "Yes", but, since no one is in the Administrator office, your installation comes to a halt. This blocks "Install" and "Uninstall". I get lots of messages I need Adobe Flash Player. I've trie over and again to install it, going to Windows 32 bit, but can't uninstall my previous tries. It will always download, and that's all. I've tried to install my digital camera's CD, but can't.
Laptop configuration:
Windows 7 64 bit Professional
Linux 11.04 (dual boot)
i7, 2Gb RAM.
The computer has been running fine for the last year. I am giving the series of events below:(Please note that linux is still running fine, so this cant be a hardware problem)##Today, when I started my laptop, it failed to start. It showed no error, its just that after the windows logo comes, it froze in a black screen with mouse cursor visible.###I forced restart, and then it gave me the option to repair, because windows was unable to start. ###I chose repair, and the repair program started "detecting problems". Then it gave me the option to either do a system restore or cancel. I chose system restore. ###I let it run for 3 hrs., but it seemed to make no progress, so I forced restart. (It didnt let me cancel also, said that current recovery process cannot be canceled)###I tried to enter safe mode this time, and was successful. I went to system restore, where it showed me an option to restore to an older point where I hadnt uninstalled a game (Assassin's creed Revelations)### For some reason, I didnt restore the system. I thought that maybe all this was a temporary problem. So I restarted normally, and tried starting windows the normal way. It failed. After the windows logo comes, there is a black screen with mouse pointer for a few seconds, then it automatically restarts. (this is what happened then, and also happens now)### I tried entering safe mode, but failed. Same thing started happening in safe mode also. Even though I opened safe mode successfully just a while ago.### I tried many times to start windows in safe mode and all its variants, but to no avail.### I tried many times with the startup repair option, but also to no avail. It always seemed that it would go on forever.
I dont have the windows 7 installation Cd or even the recovery CD. (how bad is that?). So I borrowed a recovery CD from a friend, who also has windows 7 64 bit, and booted from it. It said that the driver windows/system32/driver/isapnp.sys was missing or corrupt. It says that I need the installation CD and select repair. But I dont have the installation CD from which my windows was installed. I have two questions:
1. If I somehow ask around and get someone else's windows 7 64 bit installation disk, will it work? (Someone else's disk, from which my windows was not installed). I dont need to put in the key or something, do I? I dont even know the key. The laptop came with windows installed and everything.
2. Can I simply replace the file isapnp.sys in windows/system32/drivers folder through linux? I asked my friend to give me his isapnp.sys file (which was of the same size as mine, he also ran win7 64 bit). Replaced it, but it doesnt work. Is there some other place I should replace it too, or this method is not supposed to work?
I have been having some weird problems on my laptop. I first did a memtest using memtest86 4.0 and that came up clean. I am now doing a disk check and it was progressing fine till now. the screen says stage 5 of 5 97% (82135612 of 84678825 free clusters processed) for over and hour and the HDD light is no longer on. any advice as to what I should do? I have heard that forcing the system to reboot during a disk check can ruin your system so I don't want to do that.
View 7 Replies View RelatedI bought another pc today to replace my current work pc, now here is what it does since i pulled it out the box I have a ASUS CM687 it runs checkdsk every restart on D, which i think is where the recovery is at for the PC, now it trys to do it and says it was unsuccessful, thing is brand new out the box i am trying to understand why is it doing that and then saying there has been a problem trying to scan it then boots right into windows?
View 1 Replies View RelatedAfter rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER, so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.. what to do from Safe Mode to return my boot up back to normal?
View 4 Replies View RelatedWhen my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
View 1 Replies View RelatedThis issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies View RelatedI do a fresh install of Windows 7 and I have purchased a new hard drive as well as tried it on 2 others. After I do the install odd things happen like long pauses when opening windows like control panel, IE and others. The real trouble begins win I reboot the Pc it then runs a check disk and finds and removes errors. Each time it reboots, check disk and loads windows it takes longer and longer until windows will not boot. I've tried loading all the drivers and none of them. I loading Windows 7 via the disk.
View 1 Replies View RelatedAfter running on the main hard drive, is there a log that saves?
View 1 Replies View RelatedSo I try to schedule Disk Check on my C: drive by going to Computer-> Right Click on C: -> go to properties -> Tools -> Error Checking -> Check now ->select both Disk options (1. Automatically Fix file system errors 2. Scan for and attempt recovery of bad sectors). Of course, it tells me that the disk is in use and asks me if I would like to check for disk errors the next time I start my computer. I click yes
View 9 Replies View RelatedHow to Run Check Disk in Windows 7 ?
View 0 Replies View RelatedI ran a disk check today. It seemed to go as normal, but when it finished my windows 7 pc didn't start. I restarted it, and same happened again - checkdisk had apparently been scheduled, ran, and - nothing. Tried restarting several times, but always the same.Hitting any key didn't stop checkdisk. PC won't start in safe mode. Recovery disk doesn't work. Can't get pc started at all.
View 5 Replies View RelatedMy computer rebooted while I slept, so I went and checked the Windows Logs for my System. Found out it was KERNEL-Power but that appears to have also taken our router and my brother's computer so I can safely assume something went wonky with the power.However, I did notice a pair of errors, both occurring a little while before the reboot, for bad blocks on my harddisk. Obviously, I decided to do a disk check.I tried to run the first one on my primary partition, C, and for that had to reboot since it holds Windows. The check ran fine for a few moments, but got stuck on a certain point when processing index (Step 2). Rebooting so it would try again got to the exact same point and was stuck.Currently running on the other partition of my main harddisk. So far so good, but I'll update if that one gets stuck as well.
View 3 Replies View Relatedcan i check everything when i run Disk Cleanup?
View 1 Replies View RelatedI just got a new MSI laptop a few days ago. I don't plug in my battery so I can reserve it for when I need it. 1 time I accidentaly unplug the power cord.. When I go to try to perform a disk check checking Automatically fix file system errors and Scan for and attempt recovery of bad sectors.. I reboot my laptop unplugged every usb attached and when it gets to the check menu it automatically cancel it.. what is happening.. I'm not pushing any keys or anything.
View 1 Replies View RelatedHow can I solve the disk check at boost? I have used seagatetool to check disk but the result is PASS, the hard drive had no problem. I have format the disk and reinstalled Windows 7 but disk check still run.
View 6 Replies View RelatedHow to Reset Check Disk to Not Run at Startup ?
View 0 Replies View RelatedMy hp dv3t has been giving a message about checking a disk for consistency every time I reboot(ed) for about a week now, but today it froze after the countdown reaches zero (for bypassing the procedure)�nothing I do can get it past this step. What do I do? I tried booting from Safe Mode, it listed a bunch of drivers but then froze.I'm using W7 64-bit Home Premium.
View 3 Replies View RelatedFujitsu Siemens laptop, Intel dual core, 1.75g ram. When I restart it, fails to load and doesn't even show to startup screen, nothing, just a black screen. so, I must shut it down from the power button. And if I start it rapidly, it's possible to not start from the first try. I made a fresh install of the OS, nothing. Can this be a hardware problem?
View 4 Replies View RelatedMy lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies View RelatedMy PC has decided to do a check disk every time it boots up, what is causing it.
View 5 Replies View RelatedThough it was likely foolish of me to keep putting it off I can no longer run a disk check. The 10 second timer stops itself at 10 and proceeds to the log in screen. Not sure if it's important but my "l" key is broken and I was told that that key being broken may be counting as the "press any key to skip dick check". If that is the issue is there any way around it? And if that isn't it then why won't my disk check continue?
View 3 Replies View RelatedHow long does a full disk check take? Just curious so I can plan my time.
View 9 Replies View RelatedI've used the Win 7 built in Disk Defragmenter since day one. Noticed about two months ago that it is not checking C:. It checks the other included drives (an external HDD and a Recovery drive) on schedule. I have tried unchecking and rechecking and changing scheduled times all to no avail. As a workaround I manually analyze the drive...when I remember.
View 5 Replies View RelatedAt the time of updating avg 2011 free version my pc is giving chkdsk error i have tried to uninstall but i could not do it.
View 1 Replies View Related