When my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
I have been having some weird problems on my laptop. I first did a memtest using memtest86 4.0 and that came up clean. I am now doing a disk check and it was progressing fine till now. the screen says stage 5 of 5 97% (82135612 of 84678825 free clusters processed) for over and hour and the HDD light is no longer on. any advice as to what I should do? I have heard that forcing the system to reboot during a disk check can ruin your system so I don't want to do that.
I bought another pc today to replace my current work pc, now here is what it does since i pulled it out the box I have a ASUS CM687 it runs checkdsk every restart on D, which i think is where the recovery is at for the PC, now it trys to do it and says it was unsuccessful, thing is brand new out the box i am trying to understand why is it doing that and then saying there has been a problem trying to scan it then boots right into windows?
I wanted to do the checkdisk action for my computer, it fails, and saying I have to use system restore to get rid of a recent software package installation.
I do a fresh install of Windows 7 and I have purchased a new hard drive as well as tried it on 2 others. After I do the install odd things happen like long pauses when opening windows like control panel, IE and others. The real trouble begins win I reboot the Pc it then runs a check disk and finds and removes errors. Each time it reboots, check disk and loads windows it takes longer and longer until windows will not boot. I've tried loading all the drivers and none of them. I loading Windows 7 via the disk.
So I try to schedule Disk Check on my C: drive by going to Computer-> Right Click on C: -> go to properties -> Tools -> Error Checking -> Check now ->select both Disk options (1. Automatically Fix file system errors 2. Scan for and attempt recovery of bad sectors). Of course, it tells me that the disk is in use and asks me if I would like to check for disk errors the next time I start my computer. I click yes
I ran a disk check today. It seemed to go as normal, but when it finished my windows 7 pc didn't start. I restarted it, and same happened again - checkdisk had apparently been scheduled, ran, and - nothing. Tried restarting several times, but always the same.Hitting any key didn't stop checkdisk. PC won't start in safe mode. Recovery disk doesn't work. Can't get pc started at all.
My computer rebooted while I slept, so I went and checked the Windows Logs for my System. Found out it was KERNEL-Power but that appears to have also taken our router and my brother's computer so I can safely assume something went wonky with the power.However, I did notice a pair of errors, both occurring a little while before the reboot, for bad blocks on my harddisk. Obviously, I decided to do a disk check.I tried to run the first one on my primary partition, C, and for that had to reboot since it holds Windows. The check ran fine for a few moments, but got stuck on a certain point when processing index (Step 2). Rebooting so it would try again got to the exact same point and was stuck.Currently running on the other partition of my main harddisk. So far so good, but I'll update if that one gets stuck as well.
I just got a new MSI laptop a few days ago. I don't plug in my battery so I can reserve it for when I need it. 1 time I accidentaly unplug the power cord.. When I go to try to perform a disk check checking Automatically fix file system errors and Scan for and attempt recovery of bad sectors.. I reboot my laptop unplugged every usb attached and when it gets to the check menu it automatically cancel it.. what is happening.. I'm not pushing any keys or anything.
How can I solve the disk check at boost? I have used seagatetool to check disk but the result is PASS, the hard drive had no problem. I have format the disk and reinstalled Windows 7 but disk check still run.
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
My computer will not get past the file checking screen where it stops the countdown at 1 and does nothing. No matter what I press it won't boot up, it always freezes and does nothing. I went into startup options, and did every diagnostic test there, all came up 100% Ok, that took over 6 hours. And I still can't get past the screen. I have close to 1000 episodes of tv on there, I really don't want to lose everything...
'm having problem with windows 7. oftenly the DISK CHECKS appear before startup. i've reformatted my computer 3 times but this disk check problem is still there.
Though it was likely foolish of me to keep putting it off I can no longer run a disk check. The 10 second timer stops itself at 10 and proceeds to the log in screen. Not sure if it's important but my "l" key is broken and I was told that that key being broken may be counting as the "press any key to skip dick check". If that is the issue is there any way around it? And if that isn't it then why won't my disk check continue?
I've used the Win 7 built in Disk Defragmenter since day one. Noticed about two months ago that it is not checking C:. It checks the other included drives (an external HDD and a Recovery drive) on schedule. I have tried unchecking and rechecking and changing scheduled times all to no avail. As a workaround I manually analyze the drive...when I remember.
I have a drive that is a 15 GB partition on a 80 GB disk. It is an old disk, so could be failing, but action is strange. Other partitions on the drive succsessfully completed the checking disk procedure, but the 15 GB partition is taking an enourmous amount of time for each file after a swift run of the first 300 files. After that, I'm estimating it takes 10 minutes per file and has been running since 11AM yesterday. It is now near 8AM and it is still only at file 781. Is it possible for a failing disk to manifest itself in one partition before the others? Or is there some other possibility that I should examine.
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I used to have that annoying check for disk consistency thing when you boot up so I just let it go and afterwards now programs like Itunes Rhapsody and some other programs just wont open. I click on them and the mouse pointer goes into loading icon like its about to open but then nothing opens.
Anyways, every time I try to schedule a "Check Disk" it NEVER starts on a restart. I already did the "sfc /scannow" command on the cmd prompt. In fact it said it was UNABLE to fix some problems. I have attached a file of my "SFC scan log". Inside it says it was unable to fix "Chkdsk.exe" Go figure. Alright, just some extra information. I also think my computer is confused of itself . I mean, it seems to not know if its a 64 bit or a 86 bit! I was told to install a hotfix for "Chkdsk.exe" here [URL]. But it did NOT work. I attempted to install both 64 bit AND 86 bit hotfixes, and yes they were both windows 7 (Chkdsk.exe) hotfixes.
My system specs: - Toshiba Qosmio X505 Laptop- Windows 7 64bit (Yes it says 64 bit but I've tried to install other kinds of hotfixes for both 64 and 86 bits and none of them worked!) Intel Core i5 4gb Ram Nvidia Geforce GTS 360M
I have a Toshiba laptop with W7 upgraded to SP1.I noticed that it adds autocheck autochk /r ??C: to the default autocheck autochk * in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession Manager in regedit.Even if I modify it manually to autocheck autochk * it still adds autocheck autochk /r ??C,I don't think this is an administrator issue as my other laptop with W7 SP1 (SP1 included) does not have this problem.
So i recently added ram to my computer, this is DDR2 RAM, so i took out 2 old sticks that were 1 gig each and put in two 2 gig sticks. Therefore all 4 of my slots are full and i have 6Gigs in total. When i tried to start up my computer i pressed F1 to save the new memory amount (This amount was indeed correct), and my computer rebooted but then stopped at a disk check. I allowed it to run the disk check for about 10-15 seconds. In this short amount of time it was displaying a bunch of corrupted files and attempting to resolve them i am guessing, but suddenly my computer restarted around 5 times in a row in 5-10 second intervals then i got the error saying: 2233 - HECI error during MEBX execution. ME BIOS Extension Module halted. Update BIOS or ME Firmware if problem persists.I have only found onereference of this on uring-MEBX-execution/td-p/4490533 which seems like it was a faulty motherboard. What i did was i took out the new sticks of RAM and put in the old sticks of RAM and tried my computer again. This time I got all the way to the disk check again and this time i skipped it. Windows started up fine but with some other issues. When i started Google Chrome, it said that my internet explorer.lnk file was corrupted. Also if i tried to reinstall internet explorer, it would fail installation near the end. (by fail i mean i would get a window saying Internet Explorer could not fully install). Next i tried Microsoft excel, and it failed saying i did not have enough memory even though my computer stated i had 6 gigs but 5.7 something usable RAM. I tried word and it instantly "Stopped Working" as windows put it. So i uninstalled microsoft office to try an reinstall it but I rebooted my computer after I uninstalled it.
A couple of weeks ago i started receiving an error on startup saying that Disk C: needed to be checked for constancy, Type of file is NTSF, Cannot open Volume for Direct Access due to a recent software package installation, please use system restore to a point prior to the software installation. There is not a restore point available to access as far back as i need to go. What do i need to do fix this problem??? Plus is there any way to figure out what program is causing this issue, so i can uninstall it??
I periodically get notices from Windows 7 that I need to run the disk check utility. This is usually after a BSOD. These events have been occurring from the day I bought this laptop and I have posted them here in the past. This time, the disk check utility changed names on at least 12 files. I don't know WHAT files, because the utility said the file names were corrupted. After the reboot, I found that my Libraries were missing from the file manager. My Documents, Pictures, Videos and Music were gone. If I looked by clicking on C: and then navigating to them, I could find them, but the file manager could not. Also, clicking on the Start button, then All Programs, gave me an empty screen. All the shortcuts were gone. Many of the shortcuts on my Task Bar are missing their Icons, but they work. Many of my music files will not play because the file extension is now m4p. Changing the file extension to mp3 or mp4 does not work, the system sees them as an unknown file type. I ran Microsoft Security Essentials, a FULL SCAN, and it scanned about 86,000 files. That was all it could find. I have attached images that show the start menu and virus scan results as well as the usual dump files. The images show a black desktop, but I corrected that by re-choosing the custom theme I had made. I tried to use Restore, but the restore points have disapeared, and I cannot restore to before this event.
