when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
View 2 RepliesI recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
I'm trying to install windows 7 onto my HP 6710b laptop. But keep getting same error come up. (this also happens with 2 older hp laptops I have!) From start of boot with disc I get the following... Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.
Status: 0xc00000e9
Info: An unexpected I/O error has occurred.
It doesn't have a recovery partition so I've burned the ISO and planned to use the Key on the OEM sticker on the bottom of the machine. However, when attempting to boot from the DVD I burned (got the ISO file from mydigitallife.info) the screen shows me the "Windows is loading files" then immediately gives me the following error.Windows has encountered a problem communicating with a device connected to your computer.This error...
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
I ran chkdisk /f with no bad sectors...I am at a loss here? I've also run AVG's Rescue CD to second check my guess that the hard disk is fine. I am not 100% sure that the CD drive is perfect, but also haven't had any issues running anything from the CD while in Windows either that I know of?
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
I have a yellow triangle on my laptop that says I need to troubleshoot it. When I open the devices and printers and click on troubleshoot laptop I keep getting the error message 0x80070057. It says "An error occurred while troubleshooting:"An unexpected error has occurred. The trouble shooting wizard can't continue.
View 3 Replies View RelatedI am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown
2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers)
3. Multiple Chkdsks
4. Checked system, power, performance, battery etc with Vaio Care
5. Tested it unplugged and plugged on battery
6. Toning down my power plan's maximum processor usage, changing system cooling policy
7. Reinstalling service pack
8. Cleaning out registry with CCleaner
9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies View Relatedi recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
I was unable to go on the internet for some reason.So i tired to use a trouble shooter.Then at one point it says "an unexpected error has occurred.The trouble shooting wizard can't continue"
View 4 Replies View RelatedProblem:
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
Shows as
Level: Critical
Source: Kernal-Power
Event ID: 41
Task Category: 63
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
I am trying to configure a wireless network on my desktop pc. I am using a IOGEAR Wireless-N USB 2.0 Adapter. The drivers are the latest ones. No wireless networks are showing up. Whenever I try to manually connect to a wireless network, I receive the message "an unexpected error has occurred". I am unable to troubleshoot it or continue. At first i thought it may be the adapter, but it works fine on other computers. I also tried a different adapter with the latest drivers installed; same problem. I tried a direct connection, and I am able to connect perfectly. It's solely a problem with the wireless and thus it leads me to believe that windows 7 is the problem. I'm running 32 bit windows 7. (the drivers are 32 bit for the adapter). Tried a fresh install as well. Same issue.
View 6 Replies View Related"an unspecified error occurred during system restore (0x8000ffff)"I made a restore disk on my 64bit Windows 7 desktop for my 64bit Windows 7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?
Quote: I have a normal stock dell desktop with windows 7. I borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ an Intel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computers? Forget the folders name)and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer manufacture screen, just the blank black screen with the blinking line.I have tried everything, cant seem to figure out how to even get it to open in safe mode. Only thing I can think of would be to use the restore disk which I dont have. Is there a way to legally make a restore disk on another PC to be used on the broken laptop?
i am trying to create a restore point in my system but everytime i am getting this message: Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022)." i've even run System File Checker [SFC] and scan it but it shows that there is no integrity error. but after that while creating a restore point same error message was there. so,how should i create a restore point?
View 2 Replies View RelatedI'm attempting to do an upgrade/update install of Windows 7 Professional over Vista Business. Everything checks out with the update advisor, the anti-virus and anti-spyware programs have been turned off (I have, however, left the Windows home-grown firewall on), but shortly after the temporary files have been copied and the setup begins, I received a dialog box saying that an unexpected error has occurred and that I should retry the installation.
My system is multi-boot with the first partition for Windows XP Professional, the second with Vista Business, and the third and fourth with OpenSuse Linux. I'm trying to upgrade/update the Vista partition. SP1 has been installed for Vista, and all of the updates contained in SP2 have also been installed.
Device manager shows hidden devices for Non Plug and Play Drivers marked with a yellow star ...My pc is suddenly super slow when I google search and will time out, then it says cannot display web page....system information has critical error control on 16 kernel drivers..Do I start or stop non plug and play? Or is the critical error control the reason my pc is crawling? I have checked for virus and malware...and there is none..Im using mcfee security suite.
View 4 Replies View RelatedI used to use Belarc Advisor but now it usually takes a minute to update and load. Is there anything faster to use?
View 3 Replies View RelatedI am using win 7 home basic edition.There was a power failure and could not shut down the system.when i started the system it gave me this error.Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond.i have also booted in safe mode and went to the command prompt in safe mode and did a netsh winsock reset.But still i am getting this error.
View 1 Replies View RelatedI have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies View Relatedi have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
View 1 Replies View Relatedi downloaded a trial progran and deleted it, then i had problems with windows, booted eventually after 6 minutes but no internet and i get this error message, windows cannot connect to systen event services,log in as admin and check what services fail to load, but it wont even do that. my system restore has also been disabled etc. i tried a repair but no joy, so i tried an upgrade but, because the installed version on the PC is newer than the CD version it wont do the upgrade. i am trying to avoid a clean install. how can i get past the "you have a newer version of windows" and do the upgrade,
View 1 Replies View RelatedI have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
I have on my computer XP pro installed on C:
Then I have a partion E: for the windos 7 beta 1 with 50 Gb
I started the computer with the WIndows 7 DVD and the win 7 start to install and extract the files and then restart and the follow error comes:
A disk read error occurred
Press CTRL+Alt+DEl to restart
But I can't do anything, the computer hangs
I must backup the xp, because the boot of xp was overwrite.
I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]
View 2 Replies View RelatedIt's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
View 9 Replies View Related"an unspecified error occurred during system restore (0x8000ffff)"I made a restore disk on my 64bit win7 desktop for my 64bit win7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?I have a normal stock dell desktop with windows 7 borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ anIntel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computersorget the folders name)and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer anufacture screen, just the blank black screen with the blinking line.
View 1 Replies View RelatedI am currently on Windows Vista Home Premium 32 bit and I have bought and downloaded Windows 7 Pro 64 bit.
I have used the upgrade adviser and it says: Information about upgrading to 64-bit Windows 7
System Details
Custom installation required You'll need to perform a custom installation of 64-bit Windows 7 and then reinstall your programs. Make sure to back up your files before you begin.
Go online to get important information about custom installation
Windows Mail and Parental Controls (Web Filtering) These features are no longer included in Windows 7. You can get similar programs for Windows 7 from other software manufacturers.
Go to the Microsoft website to learn more
More info from Dell Inc. Dell Inc. has a website that might give you more information about getting Windows 7 running on your PC.
Visit the Dell Inc. website
Windows Aero support Your graphics adapter supports the Windows Aero user interface.
Go online to learn more about Windows Aero
CPU speed: 2.7 GHz Your CPU meets the 1 GHz minimum requirement.
3.3 GB of RAM Your PC meets the 2 GB minimum requirement.
149.8 GB free space available on C: Your hard disk meets the minimum requirement of 20 GB free space for 64-bit Windows 7.
Now wants I start installing it fills up the green bar and then when there's just a bit left to go I get the error message:
An error has occurred. Unspecified error
Anyone got any idea of what's going on?
I was having problem running office 2007 on my windows 7 desktop hp machine. I uninstalled and wanted to install it again, this time i am getting this error message "error 1935. An error occurred during the installation of assembly component{4C0384C6-ED23-4E23-95F5-C812AAD8EFFE}. HRESULT: 0x8002802F"
View 1 Replies View RelatedI have a Toshiba Satellite C660 and it is failing to start up. A few days ago i was on my laptop and i turned it off, the next day when i turned it on it came up with an option to chose " launch start up repair" or "start windows normally" but when i chose either the same error message appears after 2-3 minuets of waiting.The error message says:"Windows has encountered a problem communicating with a device connected to your computer.This error can be caused by unplugging a removable storage device such as an external USB drive while the devise is in use, or faulty hardware such as a hard drive or CD- ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.If you continue to receive this message, contact the hardware manufacturer.
Status: oxc00000e9
Info: An unexpected I/O error has occurred."?
So yesterday in the early AM's I was browsing my internet and all the sudden, bam.i lost my internet.No reason at all, it just happened. This is only my computer, everything else works fine (If internet is out, our TV's don't work)When I go to my little internet icon in the taskbar, it says Unidentified Network and I have no internet access what so ever.When I run CMD and use ipconfig /release I get this:"An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified."I also got this error before:"An error occurred while releasing interface Local Area Connection : An address has not yet been associated with the network endpoint." Tech support kept telling me to use ipconfig /flushdns but whenever I entered it into CMD it gave me an error saying something along the lines of "command unrecognized" I cannot give you guys the full text of what CMD says since it's on a different computer.I am using a direct ethernet cord, not wireless.
* ipconfig /release and /renew and /flushdns
* Turn off firewall
* Update and Reinstall Driver
* Restarting my modem/router
* Restarting my computer
* Unplugging my ethernet cord and replugging it (also leaving it unplugged over-night)
* Manually assigning the 12 code I'm assuming IP
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
View 1 Replies View Related