I'm trying to install windows 7 onto my HP 6710b laptop. But keep getting same error come up. (this also happens with 2 older hp laptops I have!) From start of boot with disc I get the following... Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.
Status: 0xc00000e9
Info: An unexpected I/O error has occurred.
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
It doesn't have a recovery partition so I've burned the ISO and planned to use the Key on the OEM sticker on the bottom of the machine. However, when attempting to boot from the DVD I burned (got the ISO file from mydigitallife.info) the screen shows me the "Windows is loading files" then immediately gives me the following error.Windows has encountered a problem communicating with a device connected to your computer.This error...
Status: 0xc00000e9 Info: An unexpected I/O error has occurred
I ran chkdisk /f with no bad sectors...I am at a loss here? I've also run AVG's Rescue CD to second check my guess that the hard disk is fine. I am not 100% sure that the CD drive is perfect, but also haven't had any issues running anything from the CD while in Windows either that I know of?
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
I have a yellow triangle on my laptop that says I need to troubleshoot it. When I open the devices and printers and click on troubleshoot laptop I keep getting the error message 0x80070057. It says "An error occurred while troubleshooting:"An unexpected error has occurred. The trouble shooting wizard can't continue.
I was unable to go on the internet for some reason.So i tired to use a trouble shooter.Then at one point it says "an unexpected error has occurred.The trouble shooting wizard can't continue"
I am trying to configure a wireless network on my desktop pc. I am using a IOGEAR Wireless-N USB 2.0 Adapter. The drivers are the latest ones. No wireless networks are showing up. Whenever I try to manually connect to a wireless network, I receive the message "an unexpected error has occurred". I am unable to troubleshoot it or continue. At first i thought it may be the adapter, but it works fine on other computers. I also tried a different adapter with the latest drivers installed; same problem. I tried a direct connection, and I am able to connect perfectly. It's solely a problem with the wireless and thus it leads me to believe that windows 7 is the problem. I'm running 32 bit windows 7. (the drivers are 32 bit for the adapter). Tried a fresh install as well. Same issue.
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
I downloaded an ATI Graphics driver from the sony website then when I launched the installer, it says: "checking system information.." then after that something will pop up saying "an I/o error occurred while installing a file. This is normally caused by a bad installation media or a corrupt installation file." What's wrong with this? I used internet download manager to download the file, although while I was downloading it, there was a blackout but when the electricity came back I quickly resumed downloading it.
So, about 2 weeks or so ago my PC was working perfect, no issues whatsoever. Then about 2 - 3 days after I went on my PC and things just froze up, I couldn't shut down properly because it was just stuck froze. So I shut down using the button, but when I turned it back on I got "Disk Read Error Occurred". So I left my PC off for a while and it worked again after a few restarts, but it seems to keep coming back, my PC also sometimes freezes up.
I tried to make a small 7gb partition on a separate drive and it worked fine. I had already had this drive which is a 1tb drive partitioned as follows: 500bg and 500gb. So I booted using my xp disk and it part. and when it restarted I got the following: "a disk read error occurred. Press Ctrl+Alt+Del to restart".
Now I can't install xp because it won't find the 7gb partition on restart and I no longer can boot into Windows 7. I tried running Windows 7 startup repair but it says:
"startup repair cannot repair this computer automatically."
The first line of the problem signature is StartupRepairOffline.
I was trying to boot windows 7 from DVD. but while installing I tried to delete my one partition to repartition it with larger size.but when I deleted that, my other two logical partition got deleted showing unpartition disk. No idea on how did this occur..I tried to create partition using XP DVD. but after copying the windows while it took restart, it showed the disk o boot error problem and I tried to boot again with Windows 7 DVD. but no help. everytime its showing the disk error message..
I'm trying to reformat my PC with windows 7 and i've made a boo-table USB which contains windows 7 on it.When I try to boot up from it it says A Disk Read Error Occured. It is not the USB sick itself as I've tried it on my laptop and it was able to boot from it.My BIOS setting indicate to boot from USB first.
I am currently on Windows Vista Home Premium 32 bit and I have bought and downloaded Windows 7 Pro 64 bit.
I have used the upgrade adviser and it says: Information about upgrading to 64-bit Windows 7
System Details
Custom installation required You'll need to perform a custom installation of 64-bit Windows 7 and then reinstall your programs. Make sure to back up your files before you begin.
Go online to get important information about custom installation
Windows Mail and Parental Controls (Web Filtering) These features are no longer included in Windows 7. You can get similar programs for Windows 7 from other software manufacturers.
Go to the Microsoft website to learn more
More info from Dell Inc. Dell Inc. has a website that might give you more information about getting Windows 7 running on your PC.
Visit the Dell Inc. website
Windows Aero support Your graphics adapter supports the Windows Aero user interface.
Go online to learn more about Windows Aero
CPU speed: 2.7 GHz Your CPU meets the 1 GHz minimum requirement.
3.3 GB of RAM Your PC meets the 2 GB minimum requirement.
149.8 GB free space available on C: Your hard disk meets the minimum requirement of 20 GB free space for 64-bit Windows 7.
Now wants I start installing it fills up the green bar and then when there's just a bit left to go I get the error message:
have just bought a refurbished toshiba Satelite laptop from Curry's and after a few days it starting coming up with an 'error occurred during upgrade' message. It appears several times during the day. The laptop seems to be running okay otherwise, but it is annoying when it keeps popping up. I am running windows 7.
- x86 (64-bit) - the original installed OS on the system: Windows 7 professional 64 bit - full retail version - What is the age of system (hardware): 2 months - What is the age of OS installation: it was an OS migration; almost one year
This is kinda long and I've fixed it, but could use your input. So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either. My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things; after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.
When I try to use the "Turn Windows features on or off" function to add or remove anything I get "An error has occurred. Not all of the features were successfully changed." I need to remove Microsoft .net framework 3.5.1
Few days ago I install a Windows 7 on my HP Pavilion dv6000. It was ok for the first two days then started to get a message saying their is an error in system 32, and wants me to run f something utility (cant remember what it was). One night the computer was running fine, and shut down fine. When I start it up the next morning on boot I got a black scream message saying "disk read error occurred press ctrl+alt+del to restart" Doesn't help when I restart it. Then I burn a trail version of windows 7 onto a dvd from Microsoft website, and tried to reinstall windows during boot by pressing F9, selecting boot from dvd, but end up back at the same error message. I spend hours reading all over the net about this problem, and realize it could be one out of many problems. only understand about half the stuff I read
i have purchased a laptop Asus k53sd , i m trying to connect my nokia n70 to my laptop but my laptop is discovering my phone and doing changes in setting from bluetooth is shows me error an error occurred while saving your settings
