Cannot Reinstall Windows 7 - An Unexpected I/O Error Has Occurred
Aug 23, 2012
It doesn't have a recovery partition so I've burned the ISO and planned to use the Key on the OEM sticker on the bottom of the machine. However, when attempting to boot from the DVD I burned (got the ISO file from mydigitallife.info) the screen shows me the "Windows is loading files" then immediately gives me the following error.Windows has encountered a problem communicating with a device connected to your computer.This error...
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
I ran chkdisk /f with no bad sectors...I am at a loss here? I've also run AVG's Rescue CD to second check my guess that the hard disk is fine. I am not 100% sure that the CD drive is perfect, but also haven't had any issues running anything from the CD while in Windows either that I know of?
I'm trying to install windows 7 onto my HP 6710b laptop. But keep getting same error come up. (this also happens with 2 older hp laptops I have!) From start of boot with disc I get the following... Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.
Status: 0xc00000e9 Info: An unexpected I/O error has occurred.
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
I have a yellow triangle on my laptop that says I need to troubleshoot it. When I open the devices and printers and click on troubleshoot laptop I keep getting the error message 0x80070057. It says "An error occurred while troubleshooting:"An unexpected error has occurred. The trouble shooting wizard can't continue.
I was unable to go on the internet for some reason.So i tired to use a trouble shooter.Then at one point it says "an unexpected error has occurred.The trouble shooting wizard can't continue"
I am trying to configure a wireless network on my desktop pc. I am using a IOGEAR Wireless-N USB 2.0 Adapter. The drivers are the latest ones. No wireless networks are showing up. Whenever I try to manually connect to a wireless network, I receive the message "an unexpected error has occurred". I am unable to troubleshoot it or continue. At first i thought it may be the adapter, but it works fine on other computers. I also tried a different adapter with the latest drivers installed; same problem. I tried a direct connection, and I am able to connect perfectly. It's solely a problem with the wireless and thus it leads me to believe that windows 7 is the problem. I'm running 32 bit windows 7. (the drivers are 32 bit for the adapter). Tried a fresh install as well. Same issue.
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
have just bought a refurbished toshiba Satelite laptop from Curry's and after a few days it starting coming up with an 'error occurred during upgrade' message. It appears several times during the day. The laptop seems to be running okay otherwise, but it is annoying when it keeps popping up. I am running windows 7.
i have purchased a laptop Asus k53sd , i m trying to connect my nokia n70 to my laptop but my laptop is discovering my phone and doing changes in setting from bluetooth is shows me error an error occurred while saving your settings
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
When I attempt to disable Windows fax and scan and internet printing client an error appears and all it says is that an error occured and no changes were made. It then prompts for a reboot as if something happened. I just did this install last week and finally have everything how I want it minus that. SP1 installed fine and no other issues. ic hecked the event viewer but see nothing in there when i try and disable the components.
Well July 1st when I woke up I found that my computer restarted and said that it recovered from an unexpected error and I sent the data to Microsoft and they gave me this solution. Solve a problem with your PC. You received this message because hardware or software on your computer caused Windows to shut down unexpectedly and restart. This is a serious problem, commonly referred to as a stop error. If you've received this error more than once, we recommend that you do the following:
-Back up your files to avoid data loss in case of a complete hardware failure. - Contact the original manufacturer of your computer to determine the specific component which is failing.
How do I find my computer manufacturer?
- Click the Start button , type msinfo32 in the search box, and then press Enter. Your computer manufacturer is listed as the System Manufacturer in the right pane of the System Information window. - Click to go online to see contact info for most computer manufacturers - Additional technical info
Although we know the problem is caused by a hardware component, the error report doesn't contain enough info to tell us the specific component. It's likely that the problem is being caused by one of the following computer components:
- Random access memory (RAM) - System board - Central Processing Unit (CPU) - Power supply
I just got a system running Win7 Ultimate and I hooked up my brother MFC 9700 multifunction printer; it does basic printing, but the front panel buttons to trigger a scan don't work. I tried installing the virtual machine, running the install disk from within XP, no luck. I shut down the virtual machine, then tried running "Windows fax and scan", it sees the device, opens up the "new scan" window - then gives me the error message "An error occurred while setting scanner properties. If another program is scanning, please wait for it to complete and try again." (I had reloaded MODI and MS Photo Editor earlier, could that be creating a problem?)
I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]
"A disk read error occurred press ctrl alt del to restart windows 7" Above statement is the problem in my system.This appears when the system is booting. How can i repair my system?
Windows has recovered from an unexpected shutdown. A problem has caused windows to stop working correctly. Windows will notify you if a solution is available.This happens multiple times a day... generally in the background.What do you recommend? All my drivers seem to be OK in the Device Mgr.
I am not computer savvy when it comes to these sorts of things. The heading states it all and am wanting a bit more of an insight at any problems that may be occurring etc.. Also, as of late I have noticed that my DVD player refuses at times to read a DVD movie or game title, and only after a few open / closes it seems to work. - x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit - the original installed OS on the system? As Above - an OEM or full retail version? Retail Version
I had encountered problems with my laptop and wanted to start a fresh so I tried to install windows seven again and got all the way through the installation up until the completing installation phase then after about fourty minutesi received an error of what I beleive said windows has encountered a problem restart the computer and restart the installation and when i tried to boot I got an error after the setup is starting services screen that says the computer restarted unexpectedly or encountered an unexpected error windows installation cannot proceed, and when I restart I get stuck in this loop, I have my bios set to boot from cd drive but if I do not press any buttons it shows four different windows 7 listed, I am completely stuck in what to do, i have a dell Inspiron N5030. Im a bit of a computer noob so no jargon please, sorry if I have put this thread in the wrong part of the forum.Pretty much I'd like to know how to get rid of the 4 windows 7s and Make a fresh from my windows disk
I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
I attempted to install Windows 7 x64 RC version on my new desktop, and about 20 minutes into the "Complete Installation" section my computer crashed for a reason of which I'm not aware (I saw a blue screen with writing for about a second or two before my computer restarted). I now get the following error after windows attempts to "start services":
"Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation".
I've now clicked "OK" about 10 times, with my computer restarting properly each time, and the same error pops up every time.
I am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown 2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers) 3. Multiple Chkdsks 4. Checked system, power, performance, battery etc with Vaio Care 5. Tested it unplugged and plugged on battery 6. Toning down my power plan's maximum processor usage, changing system cooling policy 7. Reinstalling service pack 8. Cleaning out registry with CCleaner 9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.