Windows 7 - Restart Loop During Complete Installation / Unexpected Error
Sep 22, 2009
I attempted to install Windows 7 x64 RC version on my new desktop, and about 20 minutes into the "Complete Installation" section my computer crashed for a reason of which I'm not aware (I saw a blue screen with writing for about a second or two before my computer restarted). I now get the following error after windows attempts to "start services":
"Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation".
I've now clicked "OK" about 10 times, with my computer restarting properly each time, and the same error pops up every time.
My sister has a miniHP 110, which was experiencing virus troubles, so I offered to do a factory restore. I have used that option several times on my regular HP laptop with no issues, but on her's, it's giving me the error message 'Windows cannot complete the installation in safe mode. to continue installing windows, restart the computer.' It goes on in a loop. I've tried booting it in safe mode, but to no avail. I've been playing around with it for a couple of days, and got to the screen where you choose accounts from. It said the account had been disabled, and to check with my administrator. I would go through the trouble of getting a windows 7 disk, but with this version of HPmini, there is no disk drive. I'm at a complete loss, is there anything I can do?
I bought the Windows 7 professional 32 bit, done step by step guide to change from XP. Installation went well in the custom installation-message appeared for the computer to restart to complete installation. Windows 7 screen appears and the thoughts are that it had installed. "The computer restarted unexpectedly or encounter an unexpected error windows installation can on proceed to install windows click "ok" to restart the computer and then restart the installation." I called the company support (Pugh) and was advised that the fault is possibly due to the dvd disk running of an external usb hard drive I had to go to Bios settings to rearrange the boot order. I have no access to Safe mode for my keyboard/mouse mouse would not select any options in menus.Just upgraded my memory-Ebox hard drive. Cable into the VGA in. Even if I can just somehow get access to XP again. Have a restore CD but it is for my Dell laptop.
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
We took his computer back to factorysettings however when the system is trying to install Windows 7 we keep getting an error: Windows could not complete the installation. To install windows on this computer, restart the installation.How would I do that? I have tried safe mode but it won't let you install in safe mode, when shutting off the system or restartingit always gets to setup is starting services page and then the error message.
Recently I went to restore my netbook-Acer Aspire One Happy 2. Well I clicked save user data to C: drive, for me a first time user of a netbook...didn't know that if I clicked that and was using a different windows 7 edition from the OEM. That a different windows 7 edition data couldn't be saved. Now, whenever I boot up my netbook, windows will try to install on my computer but gives error:
Error message: Windows couldn't complete installation. To install windows, restart the installation.
System Specifications: Pre-load: Windows 7 starter Os using before system restore: Windows 7 Professional CPU:Intel atom N570 @ 1.66ghz Graphics card: Intel Gma 3150
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
I cant finish my windows installation on My sony vaio laptop for some reason, I never reach the point where I need to choose my computer name and settings. because before that I recieve a message stating "The computer restarted unexpectedly or encounter and unexpected error. Windows installation cannot proceed." and before it reaches that error screen I notice weird glitches on the computer screen. Is it possbile that my CPU is damage?
I've recently purchased a pre-made desktop. Upon arrival and start up today- I got the window's recovery error screen stating that hardware/software changes may be at fault. I have only the basics plugged in-I have tried unplugging them all and making sure all connections are secure, trying my old graphics card, and even dropping the ram down to 2gb. I cannot start in safe mode, nor window's normally. Whatever I choose, it goes to the window loading screen with the little orbs for about 10 seconds and restarts my computer. And ends up going to the recovery screen again. I have a reinstallation cd, but it wont read it.
I have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card.I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. I managed to get windows 7 installed but after i rebooted, "unknown error" appeared on screen. Any ideas why? I have not upgraded my BIOS (bcoz I don't know how to safely do so for my hard disk).
I have had a series of problems to my desktop in the last six months and the latest one is worrying me like hell.System specs :cpu : intel core 2 quad 2.83ghzobo : asus p5q pro ram : 2 * 2 gb zionpsu : 600 watt cooler master hdd : 1tb seagate gpu : zotac gts 250 eco 1 gbNow the problem :Suddenly , my computer started to have random reboots. I could not figure out why . Most of the times , it would not get past the starting windows logo . At times , the desktop gets loaded and restarts . Safe mode works sometimes , but not at other times.I was frustated , so i went for a fresh installation . There were restarts during "completing installation " also ... But somehow i got through it after 3 4 try.After installation , the desktop gets loaded and after 5 sec , again restart.And then back to old ways , restart after the windows logo
The program in question was Roxio Creator 2010. I restarted the computer to complete the process.An error message appeared " windows could not be started as CPSC Common Tools2 is missing...". I chose to cancel, but then the password request was on screen as normal, and everything seems to be OK.How can that be; do I need take further action?
I have had Windows 7 64bit Pro on my computer for around 10 months. I use an Upgrade version through my University that works exactly like a normal copy of Windows 7. I have had no problems with it until now. When I start it up normally and choose Windows 7 (I also have Windows XP pro on my computer) and after about 10 seconds my computer automatically restarts. I tried the Repair My Computer option 3 times and the Last Known Good Configuration twice with no success. When I start it up in Safe Mode, 7 works for about three seconds and then goes to a Blue Screen before restarting.I honestly do not know what is wrong with my computer. I have checked all of the internal connections and there doesn't appear to be anything unplugged or messed up with them in general.
I have a problem with win 7 that restart in loop.First problem become when I not know how but in BIOS changed settings from RAID1 to IDE Controler.Win become to restart, I return settings to RAID1 but have the same problem.I try to make with instalation CD:
- system recovery
- cmd bootrec with fixmbr, fixboot, rebildbcd, then chkdsk /r, sfc /scannow, ... without success With bootrec /rebuildbcd give me error total windows instalation 0.After another restart I have sometimes error depend of options I try, described in upper text:
- BOOTBCD, press ENTER and restart
- 0xc0000006b (00000000,00000000,0000000) and restart in loop
- lunch recovery repair or start windows normally if chose all of this two options win restart in loop
While playing on my laptop (SDGO SEA) my laptop suddenly goes black for a long period of time and I decided to restart. Selected "Start Windows Normally" and after the Windows Logo ("Windows is starting") the screen suddenly goes black again like what I had experienced earlier (black I mean black-black, the monitor LEDs do not light up) then the hard drive LED blinks off for about a second, blinks on, off again, then on, and the computer restarts. This repeats whenever I select that mode (I can't seem to see the "Load Last Good Configuration" option). Safe Mode works though (I'm using it to post right now). I tried System Restore but with no luck.:(
I'm not very pro at reformatting, or very familiar on reinstallign Windows (I also don't have a Win7 DVD) so please bear with me XD
Btw, Acer Aspire 4745G Windows 7 Professional SP1 32-bit Intel (R) Core (TM) i5 430M 2GB RAM
The problem is that when I boot my PC it will go black and restart after getting to the windows logo boot part. If I try Safe mode it will get to SYSTEM32DRIVERSDISK.SYS and then just bluescreens and restarts again.Before it got to CLASSPNP.SYS but I tried to rename it to CLASSPNP.OLD and now it didn't really change much. I also tried using this code but it just tells me that some files are corrupt and it cannot repair it.If I try the automatic repair option it will just try and repair for a couple of hours and then say it cannot repair and rebooting the PC.
The problem is that when I boot my PC it will go black and restart after getting to the windows logo boot part. If I try Safe mode it will get to SYSTEM32DRIVERSDISK.SYS and then just bluescreens and restarts again.Before it got to CLASSPNP.SYS but I tried to rename it to CLASSPNP.OLD and now it didn't really change much. I also tried using this code but it just tells me that some files are corrupt and it cannot repair it.If I try the automatic repair option it will just try and repair for a couple of hours and then say it cannot repair and rebooting the PC.
So, my computer is stuck in a restart loop. every now and then I see a screen with option to start windows normally or safe mode, but it loops faster then I can hit enter. being a comp guy and knowing enough about comps, tried to load Windows 7 install disk as well as Ubuntu Live Disk.. No luck, loops before they can load. Tried disconnecting everything except CPU, Graphic Card, HDD(3 different), and RAM (1 and all sticks).. No luck there either.
I'm in the process of scrolling the page using mouse wheel (either browser, or microsoft word document, etc) the screen blinks for a fraction of second, and the whole system shuts down as if somebody pulled the plug out, and then immediately restarts showing dialogue of whether I want to start windows normally or in the safe mode.
I have looked in the event logs but the only thing it tells me there is that there was an unexpected shutdown. The same in that reliability place.
how I would diagnose it? I cannot replicate it at will, as it only happens occasionally when scrolling, at other times scrolling is fine and does not produce this result. The system is Windows 7 enterprise 64bit, the mouse is Microsoft bluetrack technology
I have Windows 7 x64 Enterprise installed on a slightly older mother board (Asus MB 775 Intel with 2 GB of RAM) and has worked well for a couple of years or so. I am passing this MB/CPU/RAM combo to my son's computer and have purchased an upgraded MB/CPU/RAM.I've purchased an ASRock H61/U3S3 MB, 2x2GB RAM, Intel i7 2600. In swapping out the MB, I just attempted to plug my hard drive into this MB without doing any installation/upgrade. Unfortunately, when I plugged in the hard drive and turned it on, the computer froze on startup and more specifically, on loading the file CLASSPNP.SYS. So I figured I would have to do a fresh install of Windows. I have an identical hard drive for mirroring and deleted the partition, created new one, formatted, then attempted the reinstall. I began the installation, it copied over all of the files, installed, restarted, then when it was starting it restarted (apparently prematurely). When it restarts after locking up, I receive the error: "The computer restarted unexpectedly or encounter an expected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and the restart the installation." and so the loop goes on. I've clicked OK many times, but without restarting the installation this error comes up each time. During the final stages of completing the installation of Windows, the computer appears to randomly restart. I'm pretty much stuck and will contact the store that sold me the MB as a last resort.
I bought a new pc from aria.co.uk, it came in good nic and works fine. I booted up the pc, noticing a very strange lack of any motherboard logos or bios buttons, and proceeded to insatll windows 7. I chose the 64 bit version, I got to the part where it says it is going to restart windows in 5,4,3 etc. It restarted, only for the windows installation to start back at the very first setup screen. I looked at the partitions in custom install and it said that both partitions had installed correctly, my problem was getting to the oncluding install option. I shut down the pc, and took out the windows disc and restarted it. Again no bios options, just a black screen saying "loading operating system" and then "windows did not start correctly" , it took about 20 seconds for the screen to change and then immediately restarted itself taking another 20 seconds? It loaded the windows files and I was releived to get to the final setup screen. After finishing the installation it told me it was going to restart windows, which it did, only for it to reset itself about 3 times, again saying "loading operating system"..... I had a play around with pc, altering the resoluton and stuff, and shut it down for about 5 minutes. When I turned it on it told me "windows did not start correctly" and took me system repair, in which it found a problem and couldn't fix it. The hardware was fine, but it said "a patch stopped the system from starting". It is very hit and miss and sometimes starts normally and sometimes takes me directly into system repair. I managed to get into the bios once by pressing delete rapidly at boot up, and hardrive was selected as priority, so that couldn't be the problem involving windows.
something shut down my new laptop when i went to put on for some reason it needed to reinstall windows 7 home premium.... after loading windows files appears ....then it stops says please wait..... the screen goes black then reads setup is starting services a box appears andsays ........windows could not complete the installation............i push OK...it then says to install windows on this computer restart installation ............th;is happens over and over again....and nothing more........i have tried a restore,systems check,tried to open in safe mode,....
Just got a new HP laptop for Christmas (yeah. It's not even 7 on Christmas morning and I'm already having problems.) I've seen a lot of people with this problem, but I can't fix it the way they did. "Windows could not complete installation. To install Windows on this computer, restart the installation." Here's the catch:I can't start it in Safe Mode.I can't access task manager.F11 does nothing.I've tried alt+tab to see if these things are running in the background; they're not.I don't have any disks.It's an HP Pavilion dv7, and I got it refurbished.
I have just restored my c drive and now during setup is preparing your computer for first use a message appears saying windows could not complete the installation. To install windows on this computer, restart the installation. It shows this message everytime I startup and keeps resetting the computer
I had a Windows 7 installation but then installed Windows 8 over it, a few weeks ago.I felt like my computer was getting too bulky and slow, so I decided to restore it to the factory conditions (system restore) by using my Windows 7 recovery disc. The restore finished and restarted, and went right to the Windows 7 loading screen, where it ended in this error message: Quote: Windows could not complete the installation. To install Windows on this computer, restart the installation. I can't restart the installation though, since the "System Restore" option is grayed out on the Windows 7 recovery disc.
Error: Windows could not complete the installation. To install Windows on this computer, restart installation. Then it gives me the option to select ok, but when I do, it will keep repeating itself. The pc will not do anything else. I have tried F2 and selecting some options, but its still the same thing. I guess what I am trying to say, its that it does nothing else but repeat itself. I do not know what else to try.
so i was trying to do a clean reinstall of windows. so all was good till i got to the completing installation part where it just stoped and said windows could not complete installation restart and try again
after this is said setup is starting services then a pop up comes up saying windows could not complete installation. to install windows on this computer , restart theinstallation. after i restarted my labtop the same thing pops up and it loops this message and my system is a windows 7home p 64bit
I am totally at my wits end. Been trying to get Windows 7 Home Edition to work on my pc for the last 4 days but no joy.I installed it first on Sunday, which worked, loaded up and I started putting on my antivirus, updating graphics drivers and windows updates. Then, it all froze on me, and since then I have been unable to load Windows 7 at all. I assumed it was down to a corrupt download/update it had done, so I tried the Repair option on the Windows 7 disc. No fix there. So, I decided to format the drive, and redo a clean install, but now, it reaches Completing Installation stage, and either goes into a reboot loop, over and over, or it reaches the Setting Registry Settings, and then goes into a reboot loop. I've tried so many options through the google sites, but nothing is making it work again. Can anyone advise me what to do to fix this and get it working again?
Okay so i have this machine, acer m3100, that originally had windows vista. I tried to do a clean install of windows 7, with an original windows 7 installation cd.Everything would go okay until right after the computer restarts and goes to the part of COMPLETING INSTALLATION. At that moment my screen suddenly flashes with the blue screen of death. i wasnt able to right the error that shows up though. Then the computer restarts and goes to setup devices and right after that an error message appears saying, windows did not complete installation, due to an unexpected restart, restart the computer and restart the installation. If i click okay it will go into an endless loop. Restarting one time after another. So i thought i would install windows vista again. Try to make things the way they were before, but i get the same error. i'm only able to install xp. With XP everything works fine. I do want to be able to install windows 7 though.
