Windows 7 X64 Installation Loop OOn New Computer

Nov 5, 2011

I have Windows 7 x64 Enterprise installed on a slightly older mother board (Asus MB 775 Intel with 2 GB of RAM) and has worked well for a couple of years or so. I am passing this MB/CPU/RAM combo to my son's computer and have purchased an upgraded MB/CPU/RAM.I've purchased an ASRock H61/U3S3 MB, 2x2GB RAM, Intel i7 2600. In swapping out the MB, I just attempted to plug my hard drive into this MB without doing any installation/upgrade. Unfortunately, when I plugged in the hard drive and turned it on, the computer froze on startup and more specifically, on loading the file CLASSPNP.SYS. So I figured I would have to do a fresh install of Windows. I have an identical hard drive for mirroring and deleted the partition, created new one, formatted, then attempted the reinstall. I began the installation, it copied over all of the files, installed, restarted, then when it was starting it restarted (apparently prematurely). When it restarts after locking up, I receive the error: "The computer restarted unexpectedly or encounter an expected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and the restart the installation." and so the loop goes on. I've clicked OK many times, but without restarting the installation this error comes up each time. During the final stages of completing the installation of Windows, the computer appears to randomly restart. I'm pretty much stuck and will contact the store that sold me the MB as a last resort.

View 7 Replies


ADVERTISEMENT

'Windows Cannot Complete The Installation' Loop

Aug 17, 2011

My sister has a miniHP 110, which was experiencing virus troubles, so I offered to do a factory restore. I have used that option several times on my regular HP laptop with no issues, but on her's, it's giving me the error message 'Windows cannot complete the installation in safe mode. to continue installing windows, restart the computer.' It goes on in a loop. I've tried booting it in safe mode, but to no avail. I've been playing around with it for a couple of days, and got to the screen where you choose accounts from. It said the account had been disabled, and to check with my administrator. I would go through the trouble of getting a windows 7 disk, but with this version of HPmini, there is no disk drive. I'm at a complete loss, is there anything I can do?

View 5 Replies View Related

Windows 7 Installation Loop At Bootup

Aug 6, 2011

I bought a new pc from aria.co.uk, it came in good nic and works fine. I booted up the pc, noticing a very strange lack of any motherboard logos or bios buttons, and proceeded to insatll windows 7. I chose the 64 bit version, I got to the part where it says it is going to restart windows in 5,4,3 etc. It restarted, only for the windows installation to start back at the very first setup screen. I looked at the partitions in custom install and it said that both partitions had installed correctly, my problem was getting to the oncluding install option. I shut down the pc, and took out the windows disc and restarted it. Again no bios options, just a black screen saying "loading operating system" and then "windows did not start correctly" , it took about 20 seconds for the screen to change and then immediately restarted itself taking another 20 seconds? It loaded the windows files and I was releived to get to the final setup screen. After finishing the installation it told me it was going to restart windows, which it did, only for it to reset itself about 3 times, again saying "loading operating system"..... I had a play around with pc, altering the resoluton and stuff, and shut it down for about 5 minutes. When I turned it on it told me "windows did not start correctly" and took me system repair, in which it found a problem and couldn't fix it. The hardware was fine, but it said "a patch stopped the system from starting". It is very hit and miss and sometimes starts normally and sometimes takes me directly into system repair. I managed to get into the bios once by pressing delete rapidly at boot up, and hardrive was selected as priority, so that couldn't be the problem involving windows.

View 1 Replies View Related

Windows 7 Stuck In Rebooting Loop During Installation?

Jan 27, 2011

Okay so i have this machine, acer m3100, that originally had windows vista. I tried to do a clean install of windows 7, with an original windows 7 installation cd.Everything would go okay until right after the computer restarts and goes to the part of COMPLETING INSTALLATION. At that moment my screen suddenly flashes with the blue screen of death. i wasnt able to right the error that shows up though. Then the computer restarts and goes to setup devices and right after that an error message appears saying, windows did not complete installation, due to an unexpected restart, restart the computer and restart the installation. If i click okay it will go into an endless loop. Restarting one time after another. So i thought i would install windows vista again. Try to make things the way they were before, but i get the same error. i'm only able to install xp. With XP everything works fine. I do want to be able to install windows 7 though.

View 2 Replies View Related

Windows 7 - Restart Loop During Complete Installation / Unexpected Error

Sep 22, 2009

I attempted to install Windows 7 x64 RC version on my new desktop, and about 20 minutes into the "Complete Installation" section my computer crashed for a reason of which I'm not aware (I saw a blue screen with writing for about a second or two before my computer restarted). I now get the following error after windows attempts to "start services":

"Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation".

I've now clicked "OK" about 10 times, with my computer restarting properly each time, and the same error pops up every time.

View 6 Replies View Related

Installation Stuck In Loop

Dec 20, 2012

I'm trying to install Windows 7. I've tried a full format and once it saves files and reboots it doesn't continue further it just starts from the beginning again. The HD has come from another PC that was working. Where can I start?

View 9 Replies View Related

Reboot Loop During Installation

Oct 15, 2009

I'm trying to install windows 7 on my laptop through a USB key, but so far I've been unsucessful. What's been happening is that everything goes fine until the installer needs to reboot itself, then the computer reboots, but installation process begins again from the beginning. No error messages or anything like that. I've begun the installation process 3 times now, each time the installer thinks it is installing a new copy.

For reference, I have an IBM Thinkpad T43, and I'm installing Windows 7 Professional.

View 5 Replies View Related

Boot Loop Preventing OS Installation?

Sep 8, 2011

I have been spending the last 2 days trying to reinstall the OS on my Area 51. I had to take out the HDD and reformat it in another PC as I was getting a boot loop that would start right after the "windows is loading files..." screen and then loop back to the Alienware boot screen. So, since then.. I put the HDD back in and unplugged all USB connections, 1394 and everything besides the keyboard and monitor. I was able to get to the OS installation screen and then at the end of the install, the PC restarted and told me that windows has encountered an error and gave me choices to restart in safe mode and on down the list, but no attempt to repair. It did ask me to put the disk back in and boot from the DVD drive, which I did, but it never goes back to the installation.

So, I then took out the battery on the motherboard and put it back (also took out the GPU and put it back in). I was then able to get back to the Windows installation screen, but after the PC had to restart, I ended up back in the same place with the Windows error and safe mode options (none of which work). So, am I looking at an issue with the MIO by chance, the MOBO battery maybe or what? I'm not sure why I'm having these issues while just trying to reinstall the OS on a clean drive.Also, could this be because I'm using 2 x 4GB RipjawsX RAM rather then the triple channel (which I am getting today)? Can I just remove the memory and try to boot without it in? Or is it possible this could be due to the MOBO battery starting to go?

View 7 Replies View Related

Setup Starting Services Loop - No Repair Or Installation Disk

Feb 8, 2012

My laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics

It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:

"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."

I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?

View 4 Replies View Related

Computer In An Endless Loop?

Jul 15, 2012

Recently, I was on my computer (A Toshiba Satellite L305D-S5974. Approx 2.5 years old) when it started to shut down with the famous blue error screen. As annoying as this was, it wasn't a big deal. No, the big deal started when my computer started acting up. It took longer and longer for it to boot to the desktop, sometimes even a half hour because I had to keep manually turning it off in on in order to get a response. Now my computer won't even go past the "Starting Windows" screen.

View 1 Replies View Related

Windows 7 Installation - Computer Shuts Off During Installation?

Jun 29, 2011

I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc

View 9 Replies View Related

Computer Freezes With Loud Buzzing Loop From Speakers

Apr 22, 2012

when i watch a Internet video, every so often, my computer completely freezes,and a wierd buzzing, repeated loop of the last miliseconds of audio play,and it's really bothering me, because no matter what i do, i can't seem to fix the problem!this problem only occurs on Internet though, and maybe everyother day once or twice when i'm on facebook.is there any suggestion or anything i could possibly do to help fix this problem.? i'm not sure what else there is to do. [code] the freezing only lasts like a 1-5 minutes though.

View 2 Replies View Related

Computer Keeps Going In An Infinite Startup Loop After Unplugged By Mistake?

Jan 28, 2013

Last night i was playing a game (DmC) on my computer and my cousin came out of nowhere and unplugged everything. (it was a multi plug that was connected to my tv, monitor and computer) When i turned my pc back on: it asked me if i wanted to repair the problem; so i clicked yes. After awhile, the computer restarted, but now it can't seem to start normally anymore, all the safe mode options work, but every time i choose to start it normally; it just goes in an infinite start up loop.It shows the hp logo, then says that it's starting up, shows a black screen with the mouse symbol showing and starts that pattern all over again.

(specs)
an hp pavilion p7-1205 with a
2nd generation intel core i5-2320 processor
intel hd graphics
2 terabyte hard drive
wireless lan 802.11b/g.n
genuine windows 7 home premium

View 11 Replies View Related

Computer Stuck In Reboot Loop On Restart After Installing NVidia Drivers

Jan 21, 2013

I recently build myself a gaming computer the specs are as follows:
i5 3570k
16GB G.Skill 1600 Mhz
ASRock Extreme4
Evga 750 Watt PSU
Asus GTX 670 2GB

After I Installed all of the drivers for everything but the graphics card it was finally time for that and as soon as I downloaded the newest drivers from Nvidia and restarted my computer I immediately got into a reboot loop and any time I've tried going into safe mode to delete the drivers my computer restarts. On top of all of that there are these red vertical lines all over my monitor.

View 2 Replies View Related

"Windows Could Not Complete The Installation, To Install Windows On This Computer, Restart The Installation"

Apr 16, 2012

First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.

This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."

View 1 Replies View Related

Windows 7 And 8 On Same Computer Installation Order

Nov 18, 2012

Which ot these two systems I should install 1st? I want to have 8 installed normally and 7 on vhd.

View 3 Replies View Related

Reinstall Windows, Computer Did Not Come With Installation CD

Jun 26, 2010

I've decided that I would like to reinstall Windows 7 on my computer. I have a Toshiba Satellite laptop, and I am currently running Windows Home Premium, 64 bit, which came with the computer, already installed when I bought it.However, since my computer came with Windows already installed, it did not come with an Windows 7 installation disk. Is there any way around this? Can I download an .iso for the CD somewhere or something?

View 7 Replies View Related

Computer Froze During Windows 7 Re-installation?

Aug 15, 2012

After my computer froze during the reinstallation I get a message telling me to restart my computer to allow the installation to finish, however it never does.

View 8 Replies View Related

Windows 7 Online Installation Onto New Computer?

Dec 3, 2012

I have an online download from my university but I'm not sure how I am supposed to install it onto my new computer, which has a blank 500 GB HDD.

View 10 Replies View Related

Recover Computer Without The Windows Installation Disc?

Dec 14, 2011

I'm on an HP laptop that originally came with Windows Vista. At some point a while back, I purchased Windows 7 online and upgraded the OS by download--meaning I don't have any physical installation discs.

Now I would like to some how recover this computer to it's factory settings, to wipe all installed programs and files, but I would prefer not to be downgraded back to Vista. Is this possible?

I don't believe I made recovery discs while Vista was installed either. Is it possible to recover the computer at all?

View 8 Replies View Related

Computer Fails To Boot Into Windows After Sp1 Installation

Mar 10, 2011

i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.

View 6 Replies View Related

Windows L.E. 2011 Installation Crashed Computer

Feb 25, 2011

When I installed Windows Live Essentials 2011 on my new Compaq Presario CQ5621F with Windows 7, it seemed to load fine. I tried to access the internet and got no connection. When I rebooted my computer it suggested that I restore to an earlier time. Upon doing so it works fine again.

View 3 Replies View Related

Computer Cannot Read Windows 7 DVD Installation Disk?

Mar 5, 2012

DVD drive can read MS Office and XP installation disk but not Windows 7 DVD.

View 4 Replies View Related

Windows Could Not Prepare Computer To Boot Into Next Phase Of Installation

Aug 13, 2012

Like 3 weeks ago the smarthdd malware affected my computer. The one where all your icons, files, etc. are hidden, gives you bogus security alerts, and then turns off the PC. Using support from the web with Rkill, MalwareBytes, and Hitman Pro. I eliminated the problem. While I thought I had recovered the computer I was wrong. Probably a day later I notice regedit would start when the computer was started and a few seconds later the computer would turn off. After turning on the computer a few times, the problem was gone. MSE is turned off. I tried to turn it on but it wouldn't turn on, saying the system needed to restart.

I also notices the computer would notify that Windows Update was also turned off and can't turn it on or download any updates (error: windows update cannot currently check for update, because the service is not running. You may need to restart the computer). Also, when I click the Nvidia settings icon, the computer does not detect video graphics hardware. I checked around a forum and I saw someone having the same problem and was advised to set BITS service and Windows Update service to start automatic. But when I check the services.msc, those services are gone. Also, I noticed that in the Device Manager, in System Devices, 2nd Generation Intel Core processor family PCI Express controller - 0101 has a yellow triangle sign on it.

On properties, it has this status: "Windows cannot initialize the device driver for this hardware. (Code 37)". So I try uninstalling MSE and installing it again, but the problem persist there. I run several scans with different anti-virus/malare and while I do find a few malwares, fixing/deleting/quarantined them haven't solved the problem. Yet, one antivirus (eset nod) wouldn't install, after many tries when it got to a driver install stage. I also try windows fix it, but nothing was solved. Also tried kapersky TDSSkiller, and nothing was solved (though when initializing, it gives an error saying that 'Can't load driver", yet it continues initializing).

So then I tried chkdsk /r in the command prompt, but it throws off an error in the second stage, restarting the scan again continuously until I decide to skip the scan. Finally I decided I had enough and tried a repair install, but after the stage where it check the programs and settings, I get the error "windows could not prepare the computer to boot into the next phase of installation". Then out of resignation I tried doing a clean install, but it gives me the same error. Later ran sfc /scannow on command prompt, and the log said that it couldn't repair DDORes.dll. So then what I did was replace DDORes.dll with one from installation disk.

Nothing was solved, and sfc scan still gives me that DDORes.dll is corrupted and can't be repaired. Later I tried upgrading the Intel graphics driver and the Intel Display Audio Driver. After rebooting the resolution of the laptop changed from 1366 X 768 to 800 X 600 as default, and now i can't increase it over 1024 X 768. Device manager shows that now both the Intel HD Graphics 3000 and Intel Display Audio cannot start due to error: "Windows cannot initialize the device driver for this hardware. (Code 37)" Or any way to at least clean install the OS so I can get rid of this problems?

View 2 Replies View Related

Windows 7 Installation For Older Computer Cant Find Drivers?

May 9, 2011

I have been looking and cant find any drivers for windows seven to run the ethernet or wireless cards in a IBM thinkpad r51 new to drivers and stuff never really had to deal with them

View 4 Replies View Related

Acer Computer Windows 7 Error - Cannot Complete The Installation?

Aug 10, 2011

We took his computer back to factorysettings however when the system is trying to install Windows 7 we keep getting an error: Windows could not complete the installation. To install windows on this computer, restart the installation.How would I do that? I have tried safe mode but it won't let you install in safe mode, when shutting off the system or restartingit always gets to setup is starting services page and then the error message.

View 7 Replies View Related

Computer Shuts Off During Installation

Aug 19, 2009

Whilst installing Windows 7, my computer will get to the "Expanding Files" part, and it will shut down at around 27-31% every time.

- All of my drivers are up to date.

- I have a brand new PSU and an HDD in my computer.

- I have ran multiple stress test programs to find a flaw in my build, nothing.

I'm at a loss here.

View 9 Replies View Related

Installation Of Old Program On New Computer

Nov 18, 2009

I bought, installed, and activated Windows 7 (and Office 2007) a few weeks ago, and just two weeks later my laptop broke down so that I will have to buy a new one. My question is this: Will I be able to install, and (most importantly) activate Windows 7 on the new laptop? What would I have to do?

View 7 Replies View Related

Computer Hangs During Installation

Sep 2, 2012

I have a Toshiba L505-L5007 laptop and a while back the audio went out on it. After days of trying to find the problem to no avail, I was advised to try a complete factory restore because the person thought it was an OS issue. Well, now I try to restore it to factory settings but the OS hangs at the configuration screen on the 5th reboot. Is there something that I might have overlooked? I've tried scouring the internet for people with the same problems, but I can't seem to find anyone with the same problem. I've also tried upgrading the BIOS in case there was a problem there keeping Windows 7 from installing. Right now the laptop will come on, and only runs well in any of the safe modes, if I try to boot it normally it'll try to finish the installation and freeze.

View 3 Replies View Related

Reformat Computer Without An Installation Disk?

Dec 30, 2011

So my computer is royally screwed and after looking for solutions for a few days I've decided to just reformat the whole thing. I have all my important files backed up but the problem is I don't have a windows 7 installation disk or any backup disks or anything ( my computer didn't come with any of that...or if it did its gone soo) is there a way for me to reformat it without that?

View 14 Replies View Related

Computer Does Not Recognize Installation Disc?

Mar 4, 2010

i have the evaluation copy of windows 7, so when it expired i bought windows 7. i want to install it, but my dvd drive does not "see" a disc. my driver is MagicISO and the device manager says it's working and updated.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved