Installation Of Old Program On New Computer

Nov 18, 2009

I bought, installed, and activated Windows 7 (and Office 2007) a few weeks ago, and just two weeks later my laptop broke down so that I will have to buy a new one. My question is this: Will I be able to install, and (most importantly) activate Windows 7 on the new laptop? What would I have to do?

View 7 Replies


ADVERTISEMENT

Windows Runs Installation Of Program When Start Program

Aug 14, 2012

I installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.

View 6 Replies View Related

Write A Program In C Program That Shuts Down A Computer In 20 Seconds?

Sep 12, 2012

how can i write a program in c that shuts down a computer in 20 seconds

View 6 Replies View Related

Windows 7 Installation - Computer Shuts Off During Installation?

Jun 29, 2011

I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc

View 9 Replies View Related

Program Installation In Windows 7?

Jun 10, 2011

How do I choose the location I want to install a program to in Windows 7. The software I am trying to install does not give me an option, it just installs to programs. The problems is that an associated program which also does no give me an option, defaults to X86 and therefore does not do the job I want it to.

View 3 Replies View Related

Cannot Get The Installation Program To Work

Dec 29, 2012

I can't seem to get the installation program to work. I get all the way to the end, but it wil not finish.

View 1 Replies View Related

Aborted Program Installation Keeps Asking At Start Up

May 26, 2012

I started installing Veoh Web Player but decided to abort the installation. Now, every time I boot up, I get a message asking: A previous software installation was not completed. Would you like to continue installing Veoh?

I've tried everything I can think of. Even installed Veoh. But kept getting the message, even after Veoh was installed. Then I removed Veoh using uninstall in Control Panel and I still get the message every time I start up.

View 3 Replies View Related

Download A Webcam Installation Program?

Jun 27, 2012

Download a webcam installation program?

View 1 Replies View Related

Email Program Installation For Windows 7?

Jul 23, 2012

I need to install a windows email program on my computer. I have windows 7 that was recently reinstalled because my computer crashed and had to be rebooted from scratch. What do I do because I am unable to send emails - I do not want outlook express. I am on wifi.

View 1 Replies View Related

Download A Webcam Installation Program

Aug 20, 2012

how to install webcam.

View 1 Replies View Related

Administrator Has Set Policies Against Installation Update Of Program?

Mar 15, 2012

I have a program called vueminder calendar. It's been installed for about a year and has gone through several updates, but for some reason this update came up saying your computer has set administrator policies against installation. I am the administrator of my computer and I'm the only one who uses it. I'm not sure what could havechanged. I've tried turning off my Norton 360 antivirus, I've also scanned forviruses, and I've made sure that all of my computer updates are installed

View 1 Replies View Related

After A Program Re-installation Restart Produces Error Message

Jun 13, 2012

The program in question was Roxio Creator 2010. I restarted the computer to complete the process.An error message appeared " windows could not be started as CPSC Common Tools2 is missing...". I chose to cancel, but then the password request was on screen as normal, and everything seems to be OK.How can that be; do I need take further action?

View 1 Replies View Related

Program Installation Repair Attempts Failing Immediately?

Feb 2, 2012

I am having problems on Windows 7 Pro where I will attempt to reinstall / repair or even uninstall a program like MS Office in an attempt to repair the installation but the install programs will fail on me almost instantly. Do I need to completely remove and reinstall these programs?

View 2 Replies View Related

Windows 7 Installation, Task Manager Shows Program But Not On Screen?

Mar 2, 2012

Is this a normal Windows 7 error? I want to install League Of Legends but after I pressed yes to Administrator permissions to the program, then there is nothing, apart from Task manager says it is running, but I can not see anything on the desktop? I cant stop the program in task manager, which I think is a little weird?

View 1 Replies View Related

Delete Install-shield Installation Information Folder In Program Files?

Feb 24, 2011

can I delete Install-shield Installation Information folder in Program Files

View 1 Replies View Related

Change Default Path Of User Profile Personal Files And Program Installation

Jun 26, 2011

I have a computer with three partitions, the first with 100GB exclusively to Windows 7 (already installed), a partition for applications and another partition for personal files (photos, text, music, movies, etc.). I wonder how to configure the location of "My Documents", so that all users have only their personal files on drive of personal files. In Windows Explorer changed in each of the users the location of the Documents, Music, Video and Pictures.

- After changed the location of the folders above, there is still the same folders in C:users , and there are user settings that are there defined, eg Desktop, in C:Users. Is there any way to move all settings and folders to another drive?
- Is there any way to do this operation automatic? for future users I will have to repeat the same operation, how can I indicate that all future users will have their settings and documents specified in this specific drive?

I installed some applications and found that some applications did not demand that the location where it was set to be installed the application, having been installed in C:users and C:Program Files, intended that all applications (except for windows and Office) were installed in drive applications. How do I specify that this is the default drive for installation applications? Keeping the installations of Windows + Office in this drive. Applications installed by the administrator are available for all users or must be given access to other users ? How done? In the drive file, which should contain the users and shared files, meant that each user only gets access their documents and shared. Where and how can make this configuration?

View 3 Replies View Related

"Windows Could Not Complete The Installation, To Install Windows On This Computer, Restart The Installation"

Apr 16, 2012

First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.

This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."

View 1 Replies View Related

What Is The "mfc100u.dll Missing" During The Installation A Program

Jul 8, 2012

what is the "mfc100u.dll missing" during the installation a program?

View 1 Replies View Related

Computer Shuts Off During Installation

Aug 19, 2009

Whilst installing Windows 7, my computer will get to the "Expanding Files" part, and it will shut down at around 27-31% every time.

- All of my drivers are up to date.

- I have a brand new PSU and an HDD in my computer.

- I have ran multiple stress test programs to find a flaw in my build, nothing.

I'm at a loss here.

View 9 Replies View Related

Computer Hangs During Installation

Sep 2, 2012

I have a Toshiba L505-L5007 laptop and a while back the audio went out on it. After days of trying to find the problem to no avail, I was advised to try a complete factory restore because the person thought it was an OS issue. Well, now I try to restore it to factory settings but the OS hangs at the configuration screen on the 5th reboot. Is there something that I might have overlooked? I've tried scouring the internet for people with the same problems, but I can't seem to find anyone with the same problem. I've also tried upgrading the BIOS in case there was a problem there keeping Windows 7 from installing. Right now the laptop will come on, and only runs well in any of the safe modes, if I try to boot it normally it'll try to finish the installation and freeze.

View 3 Replies View Related

Reformat Computer Without An Installation Disk?

Dec 30, 2011

So my computer is royally screwed and after looking for solutions for a few days I've decided to just reformat the whole thing. I have all my important files backed up but the problem is I don't have a windows 7 installation disk or any backup disks or anything ( my computer didn't come with any of that...or if it did its gone soo) is there a way for me to reformat it without that?

View 14 Replies View Related

Windows 7 X64 Installation Loop OOn New Computer

Nov 5, 2011

I have Windows 7 x64 Enterprise installed on a slightly older mother board (Asus MB 775 Intel with 2 GB of RAM) and has worked well for a couple of years or so. I am passing this MB/CPU/RAM combo to my son's computer and have purchased an upgraded MB/CPU/RAM.I've purchased an ASRock H61/U3S3 MB, 2x2GB RAM, Intel i7 2600. In swapping out the MB, I just attempted to plug my hard drive into this MB without doing any installation/upgrade. Unfortunately, when I plugged in the hard drive and turned it on, the computer froze on startup and more specifically, on loading the file CLASSPNP.SYS. So I figured I would have to do a fresh install of Windows. I have an identical hard drive for mirroring and deleted the partition, created new one, formatted, then attempted the reinstall. I began the installation, it copied over all of the files, installed, restarted, then when it was starting it restarted (apparently prematurely). When it restarts after locking up, I receive the error: "The computer restarted unexpectedly or encounter an expected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and the restart the installation." and so the loop goes on. I've clicked OK many times, but without restarting the installation this error comes up each time. During the final stages of completing the installation of Windows, the computer appears to randomly restart. I'm pretty much stuck and will contact the store that sold me the MB as a last resort.

View 7 Replies View Related

Windows 7 And 8 On Same Computer Installation Order

Nov 18, 2012

Which ot these two systems I should install 1st? I want to have 8 installed normally and 7 on vhd.

View 3 Replies View Related

Computer Does Not Recognize Installation Disc?

Mar 4, 2010

i have the evaluation copy of windows 7, so when it expired i bought windows 7. i want to install it, but my dvd drive does not "see" a disc. my driver is MagicISO and the device manager says it's working and updated.

View 8 Replies View Related

Reinstall Windows, Computer Did Not Come With Installation CD

Jun 26, 2010

I've decided that I would like to reinstall Windows 7 on my computer. I have a Toshiba Satellite laptop, and I am currently running Windows Home Premium, 64 bit, which came with the computer, already installed when I bought it.However, since my computer came with Windows already installed, it did not come with an Windows 7 installation disk. Is there any way around this? Can I download an .iso for the CD somewhere or something?

View 7 Replies View Related

Computer Froze During Windows 7 Re-installation?

Aug 15, 2012

After my computer froze during the reinstallation I get a message telling me to restart my computer to allow the installation to finish, however it never does.

View 8 Replies View Related

Windows 7 Online Installation Onto New Computer?

Dec 3, 2012

I have an online download from my university but I'm not sure how I am supposed to install it onto my new computer, which has a blank 500 GB HDD.

View 10 Replies View Related

Running Program On Another Computer?

Jan 8, 2013

I have two windows 7 computers networked and would like to run a program, which is installed on computer 2, on computer 1 but don't really want to install it on computer 1. Is there a way of doing this through the network?

View 4 Replies View Related

Computer Using Ram And Cpu But Can't Find What Program Is Doing It

Apr 15, 2012

The issue here is all my programs would freeze and I was like wth is going on? So after it happened a couple of times, I finally figured out what was going on. The system was using cpu power ranging from 20 to 50 percent and my ram was using roughly 20 to 32 percent. The weird thing about this is my computer cpu usually is around 2-5 percent and ram is around 5-12 percent when doing normal day activities.I have a vortex 120 gb and I have it updated to the latest software. My hypothesis is that there is a system defragging working in the background because I see my hard drive space going up and down. It'll go down 20gb and go back up. Sometimes goes down a lot sometimes not that much.I have three programs and I've tried closing all three.

Bitdefender-no auto defrag Iobit advance system care- I turned auto defrag off but even it the settings it's already checkmark not to defrag ssd tuneuputilites- turned off auto defrag also and same thing as earlier, there's already a checkmark to not defrag ssd
edit(forgot to mention that I turned system auto defrag off also)I ran antivirus scan and malware scan already with no luck.So here's where the big mystery comes into play. Even though there is cpu usage and ram usage when I go to windows task manager, I can't find anything that shows it's using ram and cpu even though it is.Very annoying with everything freezing. Even if I restart it still continues.

Computer specs
-nvidia special edition case
-i7 975 extreme edition
-16gb ram 1600mhz
-120 ssd
-1.5 tb harddrive and 1.0 tb harddrive
-sapphire 6990 graphics card
-5fans
-windows 7 64bit ultimate edition

View 7 Replies View Related

Copy A Program From A Computer To A CD?

Apr 26, 2011

Is there a way to copy a program froma computer and load it to another computer?

View 3 Replies View Related

Unblock A Program On My Computer?

Jun 22, 2011

Google Chrome has been blocked by my computer, it brings up this message "This may be because your firewall or antivirus software wrongly thinks Google Chrome is an intruder on your computer and is blocking it from connecting to the Internet.

Try adding Google Chrome as a permitted program in your firewall or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again." I have tried what it said and I do not have an anti virus program but it still will not allow it to run

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved