Unkown Error After Installation And Restart
Jun 21, 2010
I have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card.I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. I managed to get windows 7 installed but after i rebooted, "unknown error" appeared on screen. Any ideas why? I have not upgraded my BIOS (bcoz I don't know how to safely do so for my hard disk).
View 9 Replies
ADVERTISEMENT
Jun 13, 2012
The program in question was Roxio Creator 2010. I restarted the computer to complete the process.An error message appeared " windows could not be started as CPSC Common Tools2 is missing...". I chose to cancel, but then the password request was on screen as normal, and everything seems to be OK.How can that be; do I need take further action?
View 1 Replies
View Related
Sep 22, 2009
I attempted to install Windows 7 x64 RC version on my new desktop, and about 20 minutes into the "Complete Installation" section my computer crashed for a reason of which I'm not aware (I saw a blue screen with writing for about a second or two before my computer restarted). I now get the following error after windows attempts to "start services":
"Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation".
I've now clicked "OK" about 10 times, with my computer restarting properly each time, and the same error pops up every time.
View 6 Replies
View Related
Jul 12, 2010
I have a lenovo r60 with having windows vista installed.I wanted to have windows 7 when i started the setup.It came as follows :
"Setup is Copying Temporary Files"
"error code : 0x0 . Please restart the installation"
When i tried copying the files on to my HDD then i started the setup this happened :
"Setup is Copying Temporary files"
"Setup is starting"
Then a Option came :
"use updates or not"
I chose not :
"next"
"error code : 0xe000100"
View 6 Replies
View Related
Jul 14, 2011
how to start win 7 when password unkown
View 6 Replies
View Related
Nov 14, 2010
all I see during install is press any key, then I see a panel saying starting windows, but then the computer just restarts and goes right back to the bios. this is a clean install of windows 7 from the upgrade cd on a 120 gb hd which until recently was working fine with windows xp until I got an error about a system 32 folder being no longer there, so I assumed I had to reformat, but when I tried my windows xp home cd the computer always froze during the installs "searching for previous version of windows", so I purchased a win 7 upgrade cd hoping I could install that,but it just restarts during the install right at the very begining before I even have an option for repair.What do I do?Im typing on my old 2001 computer, and the other computer is unable to repair or fix, so I was just hoping I could install fresh. Although it definetly isn't working.
View 2 Replies
View Related
Oct 13, 2010
In Windows installation process, After installation files of Windows 7/Vista are copied, laptop can not boot anymore to resume the process. Also this occurred even after the image backup is restored on formatted C:! However, after this the laptop can not boot by any bootable DVD! - it pauses on a black screen with a blinking hyphen.
After C: is recreated and formatted, this process can be repeated!
I repeated this with a new brand HDD; That occured again! I think something wrong with my laptop (hp pavilion dv2000).
View 7 Replies
View Related
Jul 1, 2011
I'm using Windows 7 Enterprise SP1 32-bit
I'm making a test equipment to test a USB device that uses a FTDI-chip (232R). This FTDI-chip has a S/N a Vendor ID (VID) and a Product ID (PID) along with many other settings.
My problem is: 1. I get a new USB device (not flashed in anyway) from the manufacturer, insert it into a USB port on the computer and windows install the standard device drivers included with this device (these are the same for every device) and no windows reboot message is visible.
2. Now I set the S/N, VID, PID to something I like, then I have to remove the USB device to set the settings. When I insert the device again Windows install the device drivers once again, but this time it prompts me with the message "Restart Now or Restart Later". I press "Restart Later" and the device works fine anyway... BUT Can I somehow get rid of this message?
View 2 Replies
View Related
Jan 3, 2013
I was trying to format my computer, I had installed the OS of Windows 7 Ultimate x32 bit, and decided to take the opportunity to install a new one, but this time of x64 bits, this was my first time formatting my computer but apparently didnt finish good.
1: When first restart the computer to finish installing the OS, it Said That "The intallation of windows could not be completed. To finish installing Windows, restart the installation"
2: I try to do what it say, but when I try to restart the installation with the OS disk in, I get to the same window (not sure if that's what meant by what I just explained).
3: When I turn on my computer says something like: "select the operating system you want to use", and I get the "Windows 7" option twice.
I just found out according to format the computer i had to delete the partition that was the old OS and create a new one, but I cant get to that window, because as explained in section 2 always get the same message from section 1.
View 2 Replies
View Related
Apr 16, 2012
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 1 Replies
View Related
Dec 5, 2012
I have installed McAfee on my computer (I know, its the worst antivirus ever, but I have a year's subscription left and I need to use it for that year being). After installation, my browser (win 8 IE9) would not work. It would say something like "Waiting for Yahoo.ca" and perpetually be like that. A quick restart would often fix the problem but more than not the next time I open the browser would not work again. I have yet to try this issue on other browsers.
View 1 Replies
View Related
May 12, 2012
System Specifics:
Every part of the computer is completely new.Its a selfconfigured system...
Processor: AMD FX-8120 3,1GHz
Mainboard: Gigabyte GA-970-UD3 (BIOS F4)
RAM: DDR3 2x4GB 1600MHz
Graphics: Nvidia GeForce GTX 560 TI 1GB
SSD: 120GB SATA 6Gb/s
DVD: SATA Liteone iHas122
OS: Windows 7 Home Premium 64 Bit
So basically my problem is what is stated in the topic already.Windows loads the data off of the ORIGINAL (purchased it today) DVD, extracting files etc.Then after the Computer restarts and loads, the installation process comes back up again, and shows the "moving dots" behind "Finishing Installation Process" for about 10-15 seconds, then they freeze... i left it for 2 hours. Nothing happened.I tried unplugging everything during the reset, after another try to install it. It freezes.I tried the "Shift+F10" --> explorer.exe . It freezes.I tried a downloaded copy of Windows 7 Prof.... same thing, it freezes.I tried 3 different Sata2 HDDrives, same thing it freezes.
View 9 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Mar 28, 2012
My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies
View Related
Nov 29, 2009
My computer is less then 2 months old. I had an error to reinstall Windows 7, put in the disc, followed the directions, and when it was almost done, I got the blue screen of death......it then shut down, and tried to reboot. Now it does nothing but reboot, give me the Windows loading screen and then an error saying that Windows encountered an error during installation and would finish after reboot, hit ok. That loops over and over.
I attempted to change the boot sequence to pull from my CD Drive, instead of Hard drive first, however, im sorta computer illiterate, and when I get to the screen to change the order of boot, i do notice the Hard drive has a + next to it, which i take means its selected, and i move the highlighted bar down to the CD Drive and ive tried every key on my keyboard to make it select that and then enter but i just get the looping again, any suggestions?
View 2 Replies
View Related
Jan 14, 2012
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
View 1 Replies
View Related
Nov 26, 2009
I bought the Windows 7 professional 32 bit, done step by step guide to change from XP. Installation went well in the custom installation-message appeared for the computer to restart to complete installation. Windows 7 screen appears and the thoughts are that it had installed. "The computer restarted unexpectedly or encounter an unexpected error windows installation can on proceed to install windows click "ok" to restart the computer and then restart the installation." I called the company support (Pugh) and was advised that the fault is possibly due to the dvd disk running of an external usb hard drive I had to go to Bios settings to rearrange the boot order. I have no access to Safe mode for my keyboard/mouse mouse would not select any options in menus.Just upgraded my memory-Ebox hard drive. Cable into the VGA in. Even if I can just somehow get access to XP again. Have a restore CD but it is for my Dell laptop.
View 1 Replies
View Related
Apr 14, 2012
For the past two months or so my PC has been randomly restarting with no noticeThis can happen when I'm playing a game, working on a word doc in OpenOffice, or browsing the web using Firefox or Chrome. It displays no error message besides the "Windows did not shut down properly" upon restarting. It seems to happen at least once a day. Sometimes it happens shortly after the computer starts up. Other times it happens hours later.- the original installed OS on the system? - Yep- an OEM or full retail version? - Full Retail- What is the age of system ()? - Roughly 14 months- What is the age of OS installation (have you re-installed the OS?) - Roughly 14 months
View 5 Replies
View Related
Aug 19, 2012
Does anybody know what is this? Whenever I restart a Windows 7 machine, I get this error; There was a problem starting msitgm32.dll. The specified module could not be found.
View 1 Replies
View Related
Aug 17, 2011
When I use the backup utility in the control panel, and try to restore an image, at the point where I hit restart, I get the message - windows cannot restart into recovery environment.
Has anyone ever seen this message (it's the first time I've seen it).
View 9 Replies
View Related
Jan 1, 2013
after a restart.my laptop have something wrong.it says:A problem has benn detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again, follow these step:Check to be sure you have adequate disk space. If a driver is identified in the stop message. disable the driver or check with the manufacturer for driver updates. Try changing video adapters.Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options,and then select safe mode.
View 9 Replies
View Related
May 1, 2011
After my PC has been running for a certain amount of time (anywhere from a few hours to a few days) my folders no longer load/display the items inside correctly until I restart. I either get a completely blank folder where I know there are files, or I can see the files but the icons don't display. For instance, I am currently experiencing this, and in my "my documents" folder, some of the folder shortcuts show NO icon at all, just the blank placeholder and the text under it, and some just show a plain folder. When things are working correctly, each folder displays, usually showing media that is inside that folder or some type of specific icon.One thing that is common once this problem begins happening is the green loading bar that runs across the top of the folder window becomes slower the further to the right it goes, and never makes it all the way to the right. It slows and stops at about 95%.
This error is NOT present when I am looking at a folder through a program. For instance, if I go into Adobe Photoshop, then "Open," and then browse to My Documents, All of the foldrs in that "open" windows display correctly. Everything appears as normal in folders in this view, as opposed to nothing appearing if I open it in windows explorer.[URL]Finally here is a view of the FreeCorder folder where there ARE items stored, but nothing appears due to this error.Again, all i have to do is restart and everything will be fine again for a while. Then some magical trigger is executed (I have no idea what that trigger is) and things go funky like this.I DO put my computer on stand-by frequently, but that doesn't seem to be THE trigger, as it has come out of stand-by performing normally.
View 2 Replies
View Related
May 29, 2012
I installed windows 7 ultimate 64 bits, I do all updates including sp1, and it appears one last update that is IE 9 but on optional. It seems that it install, when I restart pc windows is installing ok, but when it restarts it started installing and reverting changes with error. I already downloded the file and its is the same. I do reset updates and is the same.
View 4 Replies
View Related
Jun 25, 2011
Looking for any help. System is AMD Dual core CPU, on Gigabyte GA-880GMA-USB3, 4 Gb Crucial Memory, Western Digital SATA hard drive, and Windows 7 Professional, 64 bit.After loading Office 2007, and updating it, I turned system off. This AM, I rebooted the machine and received the message that there was a disk read error and to press cntrl/alt/del. So far, there isn't any results from the attempts I have made to repair or boot the machine, including booting into command console to repair. It shows there is no operating system present.
View 6 Replies
View Related
Dec 19, 2010
I constantly get this error everytime i try to boot up, i also cannot boot from a recovery disc for some reason as i just get the same error. I've removed the RAM and HDD and put them back but i still get the same.
View 7 Replies
View Related
Aug 16, 2012
I am working on a MSI CR620 laptop that is running Win 7 HP x64. On start up it says to press F3 for recovery, I have done that and have gone through the recovery, getting the post that windows has been installed completely, and to press ok to restart, after pressing okay, the computer restarts and I get the "Disk read error, press Ctrl+Alt+Del to restart again. I have ordered a recovery disk from the manufacturer, but I don't have warm fuzzys that it will correct the issue.
View 1 Replies
View Related
Mar 31, 2009
I had Vista 64x and Windows 7 build 7057 set up in a dual boot with Windows 7 on a 30Gb partition.
Acting on advice in another thread I decide to shrink my Vista partition and expand my Windows 7 partition using GParted.
That seemed to go ok and I shrank Vista partition to about 400GB and expanded the Windows 7 partition to about a 100GB.
However, I now cannot boot at all. When I try I get "A disk read error occurred. press Ctrl+Alt+Del to restart".
When I try this nothing happens and I have to do a power shutdown.
I have attempted repairs using my Vista disk and that tells me nothing is wrong. Likewise I tried repair with my Windows 7 disk with the same result. Both tell me that the system booted succesfully.
I then tried reinstalling both Vista and Windows 7 to their respective partitions and I still get no boot and a Disk read error message.
I have been in the BIOS and tried every boot device option but still nowhere.
I'm writing this from the Asus Splashtop OS that came with my mobo. I thought it was a bit of a gimmick but it might just save me now!
View 9 Replies
View Related
Feb 2, 2012
I've been googling and browsing forums for the last several hours and have not found my exact error. The only time I'm getting the error svchost.exe unable to start error 0xc0000142 error is when I'm trying to shutdown and reboot. Windows 7 will force a restart, and after a while will eventually close the error window (x'ing out of it does not work, nor does clicking ok), and reboot, and all seems fine otherwise, but it's beginning to really bug me. I've tried just about all the fixes suggested, and have cleaned and recleaned my registry and run other diagnostics, and everything looks okay.
View 4 Replies
View Related
Sep 4, 2012
I have an Acer Aspire 5732Z here. A friend of mine had a disk in the disk drive and said that he opened the tray and the disk was no longer there, but actually inside the laptop. He managed to get the disk out but it went fully into the laptop. He did all of this while the laptop was still turned on. I dunno whether it turned off itself or he turned it off after that, but now it constantly comes up with A disk error has occured press ctrl + alt + del to restart on boot upI have downloaded ubuntu and placed it on a disk, and booted the disk up using F12, it goes to a purple screen for a bit, then goes to a black screen and doesn't do anything else
View 3 Replies
View Related
Feb 16, 2011
Basically the main problem is that whenever my computer is left running for any given amount of time, them I will get a system restart. I would be transferring a large amount of files from a hard drive to a backup overnight, only to find myself on the login screen and half of the files transferred next morning. Or I'd be playing a game, surfing the web, even the simplest of tasks, it doesn't matter.
I am currently running Windows 7 64-Bit (A perfectly legal version too lol)
Here are the problem details of the blue screen. I am very certain it is the same exact problem every time. Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
[Code]....
View 3 Replies
View Related
Dec 4, 2011
When I start up my sisters computer I get the disk read error. with ctrl alt and delete to restart. I do this and it goes over and over and over again. if I can restart it to normal I get to own the computer. It is an acer aspire 5750G, windows 7. I cannot get it in safe mode because the error pops up! The computer has been overheated alot, as it turns off pretty quickly!!
View 2 Replies
View Related
