I'm making a test equipment to test a USB device that uses a FTDI-chip (232R). This FTDI-chip has a S/N a Vendor ID (VID) and a Product ID (PID) along with many other settings.
My problem is: 1. I get a new USB device (not flashed in anyway) from the manufacturer, insert it into a USB port on the computer and windows install the standard device drivers included with this device (these are the same for every device) and no windows reboot message is visible.
2. Now I set the S/N, VID, PID to something I like, then I have to remove the USB device to set the settings. When I insert the device again Windows install the device drivers once again, but this time it prompts me with the message "Restart Now or Restart Later". I press "Restart Later" and the device works fine anyway... BUT Can I somehow get rid of this message?
I just bought a New Asus x54c notebook, There are some problems i m encountering 1st: my synaptics pointing device driver is automatically disabled at startup .I have to manually start it from Devices and Printers<Mouse Settings. After that it completely works fine. When i bought the laptop it was working fine ,maybe CCleaner did something , i double checked the startup items, its enabled. I checked at MSCONFIG too ..enabled. Cant find anyhting wat to do.
I purchased a HP laptop that has window 7 home premium OA edition pre installed. I decided to shrink my primary partition and install ubuntu on it.However after ubuntu finish installing. I get a boot error and it leads me to the use the recovery tool. At that point, I am prompt to put in a win 7 cd.I do just that but there is no response. I also tried to go into the window 7 installation screen but it cannot find any drives.On the linux live cd however, I am able to see all my partitions on the install screen.I suspect that I might have installed ubuntu on some important factory config files.
Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???
I recently bought a refurbished Hp m6-1035dx, with OEM windows home premium 64bit.Additionally I also purchased a Samsung 830 SSD and and Optical Bay Caddy. My plan is to install the SSD in the Main Drive Bay and tranfer the current stock hitachi HDD into the Optic Bay. I was considering cloning my OS to the SSD, but decided to go for a fresh install of Windows 7 instead, considering my current OS files take up 40gb (which seems like a lot to me). So considering I have an OEM Windows 7 I opted to try the USB installation, using the guide provided on this forum. Everything was going well until I received the Device Driver error message "A required CD/DVD device driver is missing...etc" which is followed by the option to browse for the device driver. I have read numerous forums on this issue and none of the solutions have worked for me. For example I have tried switching the USB ports, I have actually tried all my USB ports, with no success. Some forums suggest I load the SATA/RAID drivers into my USB and then select those through the browse option. I have no tried this yet, as I have thus far been unsuccessful in locating these drivers. My next move was to burn the ISO onto a disc instead.
Does anyone know a good way of disabling the Windows update restart prompt completely? I have disabled the 15 minute auto restart timer but I still get the prompt to restart popping up when I am trying to play a full screen game. The best thing I have found so far is an AutoHotKey script that automatically clicks postpone which is fine for normal computer use but the problem is that my games still minimize for the short time the popup is displayed.
all I see during install is press any key, then I see a panel saying starting windows, but then the computer just restarts and goes right back to the bios. this is a clean install of windows 7 from the upgrade cd on a 120 gb hd which until recently was working fine with windows xp until I got an error about a system 32 folder being no longer there, so I assumed I had to reformat, but when I tried my windows xp home cd the computer always froze during the installs "searching for previous version of windows", so I purchased a win 7 upgrade cd hoping I could install that,but it just restarts during the install right at the very begining before I even have an option for repair.What do I do?Im typing on my old 2001 computer, and the other computer is unable to repair or fix, so I was just hoping I could install fresh. Although it definetly isn't working.
In Windows installation process, After installation files of Windows 7/Vista are copied, laptop can not boot anymore to resume the process. Also this occurred even after the image backup is restored on formatted C:! However, after this the laptop can not boot by any bootable DVD! - it pauses on a black screen with a blinking hyphen.
After C: is recreated and formatted, this process can be repeated!
I repeated this with a new brand HDD; That occured again! I think something wrong with my laptop (hp pavilion dv2000).
I have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card.I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. I managed to get windows 7 installed but after i rebooted, "unknown error" appeared on screen. Any ideas why? I have not upgraded my BIOS (bcoz I don't know how to safely do so for my hard disk).
I was trying to format my computer, I had installed the OS of Windows 7 Ultimate x32 bit, and decided to take the opportunity to install a new one, but this time of x64 bits, this was my first time formatting my computer but apparently didnt finish good.
1: When first restart the computer to finish installing the OS, it Said That "The intallation of windows could not be completed. To finish installing Windows, restart the installation" 2: I try to do what it say, but when I try to restart the installation with the OS disk in, I get to the same window (not sure if that's what meant by what I just explained). 3: When I turn on my computer says something like: "select the operating system you want to use", and I get the "Windows 7" option twice.
I just found out according to format the computer i had to delete the partition that was the old OS and create a new one, but I cant get to that window, because as explained in section 2 always get the same message from section 1.
I have 2 internal hard drives in my notebook. Disk1 is my library (documents, etc.) with no boot files. The boot is in Disk2 with my operating systems. Sometimes when I leave my computer open for video editing, etc., when I open it, I see that it has restarted, and waiting with flashing _ on the black screen. When I check the BIOS, I see that the hard disk device order has changed from Disk2 to Disk1. How could this happen and why? Is there any way for me to learn why the computer has restarted itself?
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I have installed McAfee on my computer (I know, its the worst antivirus ever, but I have a year's subscription left and I need to use it for that year being). After installation, my browser (win 8 IE9) would not work. It would say something like "Waiting for Yahoo.ca" and perpetually be like that. A quick restart would often fix the problem but more than not the next time I open the browser would not work again. I have yet to try this issue on other browsers.
The program in question was Roxio Creator 2010. I restarted the computer to complete the process.An error message appeared " windows could not be started as CPSC Common Tools2 is missing...". I chose to cancel, but then the password request was on screen as normal, and everything seems to be OK.How can that be; do I need take further action?
Every part of the computer is completely new.Its a selfconfigured system...
Processor: AMD FX-8120 3,1GHz Mainboard: Gigabyte GA-970-UD3 (BIOS F4) RAM: DDR3 2x4GB 1600MHz Graphics: Nvidia GeForce GTX 560 TI 1GB SSD: 120GB SATA 6Gb/s DVD: SATA Liteone iHas122 OS: Windows 7 Home Premium 64 Bit
So basically my problem is what is stated in the topic already.Windows loads the data off of the ORIGINAL (purchased it today) DVD, extracting files etc.Then after the Computer restarts and loads, the installation process comes back up again, and shows the "moving dots" behind "Finishing Installation Process" for about 10-15 seconds, then they freeze... i left it for 2 hours. Nothing happened.I tried unplugging everything during the reset, after another try to install it. It freezes.I tried the "Shift+F10" --> explorer.exe . It freezes.I tried a downloaded copy of Windows 7 Prof.... same thing, it freezes.I tried 3 different Sata2 HDDrives, same thing it freezes.
where I have to restart my PC every time I plug in something to a USB port, even if I've had the device in use for years.The devices don't get recognised or found by my PC unless I restart.How do I stop this from happening!
I attempted to install Windows 7 x64 RC version on my new desktop, and about 20 minutes into the "Complete Installation" section my computer crashed for a reason of which I'm not aware (I saw a blue screen with writing for about a second or two before my computer restarted). I now get the following error after windows attempts to "start services":
"Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation".
I've now clicked "OK" about 10 times, with my computer restarting properly each time, and the same error pops up every time.
After opening the Sound pane (from right click on the tool bar speaker icon) I clicked on the Set Default button near the bottom. There I clicked Disable (I think that was the term) for the onboard sound card (Conexant). Now the sound card is gone and I can't find how to turn it back on. I'm not very sophisticated but I have checked the usual suspects even downloaded the driver etc.
After opening the Sound pane (from right click on the tool bar speaker icon) I clicked on the Set Default button near the bottom. There I clicked Disable (I think that was the term) for the onboard sound card (I Conexant). Now the sound card is gone and i can't find how to turn it back on. I'm not very sophisticated but I have checked the usual suspects even downoaded the driver (Conextant) etc.
My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
I bought a new Dell Inspiron with Windows 7 pre-installed two years ago.
Recently, my computer has acquired a computer virus which slows down my computer, redirects select google entries and on my C Drive there are folders with names like "df4f0569299e83f51098af913b749bc2"
I have decided to reinstall Windows 7 using my original authentic Windows 7 CD that came with my Dell laptop. My intention is to keep my data on the hard disk. My DVD / CD drive works.Before installation is complete I get a message "No device drivers were found. Make sure that the installation media contains the correct drivers".
I see that this message is common after reading various threads. However, I am not so savvy when it comes to technical software, so things like "burning CDs", "upgrade Windows version", "built my own computer", "Bios", "32 bits vs 64" does not apply. Even after reading all the threads I still cannot make heads or tails of the recommended solutions.
Whenever I try installing Windows 7 on my new portable laptop, it always says "unable to find device drivers". I install it through usb flash disk as it doesn't have a dvd rom drive. I can browse to find the drivers on the Intel 330 SSD (replaced the hdd that came with the laptop), and a drive X: where I think is the temporary drive that windows use to run the installation setup, but I can no longer find the usb flash drive from which I booted windows installation setup from. And thus, unable to continue to install windows.
I had earlier successfully installed Windows 7 from the same usb disk the first time I did it, when the laptop and ssd were still raw and unformatted. I split the 120gb ssd to 50 and 60gb, however I wasn't able to format the 50gb system drive as windows setup wouldn't let me. This is my first time working around with a ssd, and windows wouldn't let me format it the first time I installed windows, is that okay? So after installing Windows 7, the 60gb partition didn't show up initially, and I was like wtf now I only have 50gb of drive space, but then I went to the control panel and somehow was able to make the other partition to show up. Then I realized I installed too many junk on it and I also wanted to repartition the ssd. So after like a few hours after I did the first install, I tried to reformat it again but the installation won't continue as it's now asking for the device drivers. I tried the usb stick on a desktop and on an older laptop and there was no problem.
why the windows installation fails to detect the usb flash disk after loading the windows installation setup, keeps asking for device drivers, and thus unable to continue the installation?
I bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
i have sony vaio laptop with windows 7 home edition now i want to install windows 7 pro in my laptop.i have the ISO of win pro, because my CD drive not working i m trying to install from the USB .. windows setup started but it shows error when i click "Install Now""No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse.
I recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new copy of Windows 7 Home Edition. When I got home I plugged the hard drive, a SATA drive, in and popped the install disk in, only right after I got to the "Install Now" button and clicked it did I get this message;No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OKFollowed by;A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step
So, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
