I recently bought a refurbished Hp m6-1035dx, with OEM windows home premium 64bit.Additionally I also purchased a Samsung 830 SSD and and Optical Bay Caddy. My plan is to install the SSD in the Main Drive Bay and tranfer the current stock hitachi HDD into the Optic Bay. I was considering cloning my OS to the SSD, but decided to go for a fresh install of Windows 7 instead, considering my current OS files take up 40gb (which seems like a lot to me). So considering I have an OEM Windows 7 I opted to try the USB installation, using the guide provided on this forum. Everything was going well until I received the Device Driver error message "A required CD/DVD device driver is missing...etc" which is followed by the option to browse for the device driver. I have read numerous forums on this issue and none of the solutions have worked for me. For example I have tried switching the USB ports, I have actually tried all my USB ports, with no success. Some forums suggest I load the SATA/RAID drivers into my USB and then select those through the browse option. I have no tried this yet, as I have thus far been unsuccessful in locating these drivers. My next move was to burn the ISO onto a disc instead.
i have sony vaio laptop with windows 7 home edition now i want to install windows 7 pro in my laptop.i have the ISO of win pro, because my CD drive not working i m trying to install from the USB .. windows setup started but it shows error when i click "Install Now""No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"That message gives me 3 buttons: ok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse.
So yesterday, I inserted an old disk I found that apparently had some of my old memories on, I put that in my disk drive, my PC lagged out, I could still move my mouse etc., then Blue Screen of Death, so then my PC restarted, fair enough; it then gave me this weird error, something like no OS or something. I did all the checks, unplugging any USB's etc, checking BIOS for AHCI is on and not IDE, still no workies. So then I grabbed a Win7 Installation Disc, when I went to custom install, this came up on the side.
"*Yellow Exclamation Mark Triangle* Windows cannot be installed to this disk. (Show details)."
I press show details, then this dialogue box came up.
"*Yellow Exclamation Mark Triangle* Windows cannot be installed to this disk. The computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
So I went to my BIOS, did the same checks again, ran the installer again and then same thing happened. When I say checks I went to change it to IDE, same error again. So fair enough, I reset my BIOS to default, same error again. I searched online, and I burnt a program called DBAM, which nukes your harddrive, I ran that and it seemed to have cleared my drive, I think! I tried it again, same error. I then downloaded and burnt PartitionMagic or something like that, I couldn't run anything with it as it said "BadDisk" or something like that.
As a last resort, I tried to install Ubuntu, same issues illustrated above. After, I used DiskPart in the CMD, I couldn't make a partition as it gave me a I/O Error "diskpart has encountered an error the request could not be performed because of an i/o device error". I tried to use the Win7 install again, still no damn luck, therefore I tried to use the new partition maker thing in the installation disk, another error came up.
I purchased a HP laptop that has window 7 home premium OA edition pre installed. I decided to shrink my primary partition and install ubuntu on it.However after ubuntu finish installing. I get a boot error and it leads me to the use the recovery tool. At that point, I am prompt to put in a win 7 cd.I do just that but there is no response. I also tried to go into the window 7 installation screen but it cannot find any drives.On the linux live cd however, I am able to see all my partitions on the install screen.I suspect that I might have installed ubuntu on some important factory config files.
Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???
I'm making a test equipment to test a USB device that uses a FTDI-chip (232R). This FTDI-chip has a S/N a Vendor ID (VID) and a Product ID (PID) along with many other settings.
My problem is: 1. I get a new USB device (not flashed in anyway) from the manufacturer, insert it into a USB port on the computer and windows install the standard device drivers included with this device (these are the same for every device) and no windows reboot message is visible.
2. Now I set the S/N, VID, PID to something I like, then I have to remove the USB device to set the settings. When I insert the device again Windows install the device drivers once again, but this time it prompts me with the message "Restart Now or Restart Later". I press "Restart Later" and the device works fine anyway... BUT Can I somehow get rid of this message?
whenever i try to install windows 7 from my usb it says cd/dvd device driver is missing after i click install now. how do i fix this? ive tried to mount the iso onto usb with different softwares and i redownloaded the iso in case the previous iso was corrupt wat else can i do?
When attempting to install Windows 7 on my computer (it currently has Ubuntu Desktop 12.04 installed, and has no CD/DVD drive), I get the following error; Quote:A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.I am installing it via a USB stick (copied the install files from my Windows 7 disk, due to the fact there is no CD/DVD drive). I've tried the common Internet solutions such as re-insert the USB stick, and try another USB port, none of the aforesaid have worked.
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
I have an HP-dm4 2070us and the touchpad will not work. When I go to hidden devices and the driver( Alps) for it is flagged that its not working properly and has an error code 24 for not working or present. I updated the driver and bios (and before that tried rolling back the bios. I even go to Update Driver and it says it's updated and no issues, but then when I exit back out to the main list the error code is still there and it doesn't work. I have to use tab as I don't actually have a mouse. I am on a different computer now. Another HP that I can't get the wireless printer to work on (which is an HP - a gift, otherwise I at this point would not have purchased another HP product).
Most times when I start my machine or just turn on my monitors (the Windows Display setting is set to turn off at 20 minutes, sleep is set to Never), I find that Windows is installing software. Sometimes it's successful, sometimes it fails.I see others have had this issue, but the offered remedies (reinstall drivers) did not work (I consider I may not have done it properly).? How can I get Windows to install the software correctly and then stop attempting to re-install the software?(Below is the text of the message I get.)
[Window Title] Driver Software Installation [Main Instruction] Device driver software was not successfully installed Please consult with your device manufacturer for assistance getting this device installed. Bluetooth Hands-free Audio Bluetooth L2CAP Interface Bluetooth Remote Control
I'm trying to install Windows 7 64bit. After loading windows 7 setup from my dvd drive I get the error "Required CD/DVD drive device driver is missing." From doing a lot of research, it seems this error has nothing to do with my DVD drive but has to do with the SATA Controller Driver. So I try to load the 64bit drivers for the SATA controller and it finds them okay but when i try to install, it says something like "no new devices found". The SATA Driver(s) are the only it ever finds, except for the time I enabled Raid... Then those drivers showed up as well but with the exact same results.
From another forum I was directed to this microsoft page: [URL] and the resolution says: "To workaround this issue, disable AHCI mode for your disk controller in the system BIOS. Typically the controller has to be changed from AHCI mode to "IDE" or "ATA" mode. "
My motherboard is an Asus P5N-E nForce 650i SLI Chipset LGA775 FSB1333 DDR2 Mainboard. However, I can not find anyway to change the setting from AHCI mode to IDE or ATA. As far as I can tell, nothing in my bios allows me to change that setting... or at best it's unapparent.
I bought a new Dell Inspiron with Windows 7 pre-installed two years ago.
Recently, my computer has acquired a computer virus which slows down my computer, redirects select google entries and on my C Drive there are folders with names like "df4f0569299e83f51098af913b749bc2"
I have decided to reinstall Windows 7 using my original authentic Windows 7 CD that came with my Dell laptop. My intention is to keep my data on the hard disk. My DVD / CD drive works.Before installation is complete I get a message "No device drivers were found. Make sure that the installation media contains the correct drivers".
I see that this message is common after reading various threads. However, I am not so savvy when it comes to technical software, so things like "burning CDs", "upgrade Windows version", "built my own computer", "Bios", "32 bits vs 64" does not apply. Even after reading all the threads I still cannot make heads or tails of the recommended solutions.
Whenever I try installing Windows 7 on my new portable laptop, it always says "unable to find device drivers". I install it through usb flash disk as it doesn't have a dvd rom drive. I can browse to find the drivers on the Intel 330 SSD (replaced the hdd that came with the laptop), and a drive X: where I think is the temporary drive that windows use to run the installation setup, but I can no longer find the usb flash drive from which I booted windows installation setup from. And thus, unable to continue to install windows.
I had earlier successfully installed Windows 7 from the same usb disk the first time I did it, when the laptop and ssd were still raw and unformatted. I split the 120gb ssd to 50 and 60gb, however I wasn't able to format the 50gb system drive as windows setup wouldn't let me. This is my first time working around with a ssd, and windows wouldn't let me format it the first time I installed windows, is that okay? So after installing Windows 7, the 60gb partition didn't show up initially, and I was like wtf now I only have 50gb of drive space, but then I went to the control panel and somehow was able to make the other partition to show up. Then I realized I installed too many junk on it and I also wanted to repartition the ssd. So after like a few hours after I did the first install, I tried to reformat it again but the installation won't continue as it's now asking for the device drivers. I tried the usb stick on a desktop and on an older laptop and there was no problem.
why the windows installation fails to detect the usb flash disk after loading the windows installation setup, keeps asking for device drivers, and thus unable to continue the installation?
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new copy of Windows 7 Home Edition. When I got home I plugged the hard drive, a SATA drive, in and popped the install disk in, only right after I got to the "Install Now" button and clicked it did I get this message;No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OKFollowed by;A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step
If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
I have an Acer R3610 (so everything is via USB). When I plug in an I/O Magic disk drive, I get an error "Device driver software was not successfully installed".I had earlier tried to fix this situation by going to Device Manager and deleting all drivers under USB controllers. When I rebooted everything re-installed except for USB Mass Storage Device.
I have what appears to be a common problem with Win 7, as I've seen numerous users ask this question here & on other forums, but so far, none of the suggested fixes that I've found have worked for me. I'm trying to install the full retail version of Win 7 Home Premium on a new SATA hard drive in a new 64-bit PC. I'm doing this because the drive that came with the PC had Win 7 Pro on it, but it was a trial version and I don't have a key or disc for it. However, I have a new copy of Win 7 Home Premium, and since I can't downgrade without hacking the registry (which didn't work either, btw), I decided to get a new HD & start over with Win 7 HP.However, when I try to start the installation from the disc, after I click "Install Now", I get the error message "A required CD/DVD drive device driver is missing". I'm stuck there.
The Win 7 disc allows you to remove the installation disc at that point & put whatever CD/DVD you want in the drive to try and find the drivers you need, so I tried the disc that came with the motherboard, which is a FoxComm. I'm able to get into the motherboard's installation disc & select "x64" under "driver" & also under "floppy". When I select those files, I get a quick green moving horizontal band, like it's downloaded the driver. If I select any other folder or drive, I get the error message "No device drivers were found" otherwise, so I believe I'm on the right track.But still I get the same message when I put the Win 7 disc back in --- "A required CD/DVD drive device driver is missing". I also tried installing an ISO image and that didn't work.
I bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
So, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.