"error Code : 0x0, Restart The Installation"

Jul 12, 2010

I have a lenovo r60 with having windows vista installed.I wanted to have windows 7 when i started the setup.It came as follows :

"Setup is Copying Temporary Files"
"error code : 0x0 . Please restart the installation"

When i tried copying the files on to my HDD then i started the setup this happened :

"Setup is Copying Temporary files"
"Setup is starting"

Then a Option came :

"use updates or not"

I chose not :

"next"
"error code : 0xe000100"

View 6 Replies


ADVERTISEMENT

Win7 Restart At The Loading Screen - Error Code = 0x490

Apr 24, 2009

I've got a big problem this morning. My Windows 7 won't boot! All it does is restart at the loading screen. Win 7 is the only OS i have on the PC atm.

Apparantly i have a corrupted boot file and i have no idea how to fix it in win 7

it says: Root cause found:

Boot configuration is corrupt

Repair action: Partition table repair

Result: Failed. Error code = 0x490

View 2 Replies View Related

Unkown Error After Installation And Restart

Jun 21, 2010

I have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card.I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. I managed to get windows 7 installed but after i rebooted, "unknown error" appeared on screen. Any ideas why? I have not upgraded my BIOS (bcoz I don't know how to safely do so for my hard disk).

View 9 Replies View Related

After A Program Re-installation Restart Produces Error Message

Jun 13, 2012

The program in question was Roxio Creator 2010. I restarted the computer to complete the process.An error message appeared " windows could not be started as CPSC Common Tools2 is missing...". I chose to cancel, but then the password request was on screen as normal, and everything seems to be OK.How can that be; do I need take further action?

View 1 Replies View Related

Installation Error Code:0xE00000100

Jul 1, 2009

No matter how i try it I mean an upgrade or a clean install this is the error that i get : windows installation encountered an unexpected error verify that the installation sources are accessible and restart the installation error code:0xE00000100

not sure what this means.... has anyone else had this show up for them... if so whats the fix?

View 7 Replies View Related

Code 5 Error For Fresh Installation

Jan 12, 2010

I'm having Athlon XP 2000+, 1 Gig Ram, GA-7VKMP-P,Seagate 80GB (7 Yrs old build) running with Windows Pro XPSP3

Last Saturday, I tried to install the Windows 7 Professional ( Downloaded from MSDN). When tried to boot from DVD it said " Windows Cannot Boot From this drive. CODE- 5".

I tried from my another DVD drive. Same Error.

Changed all possible jumper settings for HDD and DVD-RW's ( All IDE) as Pri- master/Slave, Sec Master/Slave. Nothing Worked.

Also I tried with another copy of Win 7 Home Premium came with my Dell Laptop (Worked fine for fresh installation in my laptop). Still same Error.

But I'm able to install both Windows 7 Home Premium and Professional in the same system, starting installation from XP (Not Booting from DVD).

Now I installed Windows 7 Pro as I said and after that I deleted Windows.old folder. All running fine.

With some curiosity, I tried to boot again from DVD drive with Windows 7 Dvd, same Error, even after installing Windows 7.

Till now I don't Know how to perform a clean installation of Windows 7 in my system.

View 11 Replies View Related

Windows 7 - Restart Loop During Complete Installation / Unexpected Error

Sep 22, 2009

I attempted to install Windows 7 x64 RC version on my new desktop, and about 20 minutes into the "Complete Installation" section my computer crashed for a reason of which I'm not aware (I saw a blue screen with writing for about a second or two before my computer restarted). I now get the following error after windows attempts to "start services":

"Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation".

I've now clicked "OK" about 10 times, with my computer restarting properly each time, and the same error pops up every time.

View 6 Replies View Related

Installation Problem Error Code 0X8007017

Aug 2, 2009

So This is my 3rd install disc I made and I Re-downloaded 64 bit windows 7 no problems. Integrity was checked and successful. I burned at the slowest speed 2.4x Also no errors.

Once I go to install windows 7 it jumps to 8% then 100% then i get an error saying Files are missing or corrupted. I don't see why I should have this problem since downloading and burning process went smooth.

the error code was 08007017.

I also disabled my norton or most of it.

Anybody have any ideas whats wrong I only have about 2 more discs left to burn.

View 2 Replies View Related

Error Code: 0x80070570 During Installation 7100 X86

Apr 26, 2009

Error code: 0x80070570 during installation 7100 x86

View 2 Replies View Related

Windows 7 Ultimate Installation Error Code 0x80070570

May 22, 2012

I have this problem with my Toshiba laptop: Several days ago my com crashed, when I started my computer on the very beginning on start up screen when it says windows is starting I get a 1 second blue screen with some saying and my laptop restarts by it self. So, ok I have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% I get this message Error Code: 0x80070570.

I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taken out 1 tried to install-same error, put in another slot-same error,replaced and putted my other Ram Memory in the slots same again. So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%?

View 9 Replies View Related

Error Code 6 - Setup Was Unable To Complete The Installation

Nov 1, 2009

i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..

so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?

View 11 Replies View Related

Windows 7 Clean Installation Error-code: 0x80070570

Jun 18, 2012

i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570

View 1 Replies View Related

Error Code 0x8007050 During Windows 7 Ultimate 64bit Installation

Jan 27, 2011

I have been encountering this same error code in one of my machines. I get the Error Code: 0x8007050 during installation of Win 7 Ultimate 64 Bit. It occurs during the expansion of files phase, during instalation, with the message "Windows cannot install the required files. Make sure the required files are available..."

Machine Specs:
Intel DP43TF MB
Intel Quad Core 8300 CPU
4GB OCZ ATI DDR2 RAM
Antec 500 Watt PSU
Hitachi HDS725050 KLA360 HD
and later a Seagate ST3640323AS HD.

In previous installations of Win 7, I've observed that about 29MB are copied to the System Reserved partition. In this scenario, only 11MB are copied. I've performed the following trouble shooting in order:

- Changed out the DVD drive. Tried installation again without success.
- Performed factory system restore on the hard drive. Tried installation again without success.
- Replaced the hard drive with a new one. Tried installation again without success.
- Removed all PCI cards, and tried again with just the PCI-E video card. Tried installation again without success.
- Replaced the PCI-E video card with a PCI card. Tried installation again without success.
- Cloned the "System Reserved" partition from another PC with a functioning install of the same OS. Tried installation again without success.

It should be noted that this specific machine was previously running Win 7 Ultimate 64 Bit. I was simply attempting to upgrade the hard drive. I've also tried to install Win 7 Home and Win 7 Pro, all with the exact same error code, which occurs during the same phase of installation. I also tried to perform an Upgrade install. The machine accepted a complete install of Win Vista Ultimate 64 bit (twice), but had the same error codes appear during the Upgrade install to Win 7 Ultimate 64 Bit. I reformatted and reinstalled same Vista 64 bit OS. I tried to install Win 7 Pro 64 Bit, and again encountered the same error codes. Incidentally, I have used 3 different Retail Win 7 install media. The machine passes all MemTest and CPU diagnostics.

View 3 Replies View Related

HP Integrated Bluetooth Module Shows Error In Installation Code 10

Jan 12, 2012

HP integrated Bluetooth module shows error in installation code 10. my operating system is windows 7

View 1 Replies View Related

"Final Result: Installation Failed With Error Code: (0x80070643)

Jan 1, 2012

I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:

OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information

[code].....

View 3 Replies View Related

How To Code A Bat File To Restart Explorer And 2 Programs

May 22, 2012

hat am I doing wrong? The code stops after explorer.exe is restarted. I know this because the command prompt does not show the echo "-explorer restarted". When I look at the command prompt, the cursor seems to be on the next line, but without the normal C:UsersJohnSmith> in front of it (there is nothing in front of the cursor).
Also, if I include the command "exit" at the end of my .bat file, it doesn't seem to work. Even though if I type in exit into command prompt, the window closes.

View 2 Replies View Related

Restart At The Start Of Installation?

Nov 14, 2010

all I see during install is press any key, then I see a panel saying starting windows, but then the computer just restarts and goes right back to the bios. this is a clean install of windows 7 from the upgrade cd on a 120 gb hd which until recently was working fine with windows xp until I got an error about a system 32 folder being no longer there, so I assumed I had to reformat, but when I tried my windows xp home cd the computer always froze during the installs "searching for previous version of windows", so I purchased a win 7 upgrade cd hoping I could install that,but it just restarts during the install right at the very begining before I even have an option for repair.What do I do?Im typing on my old 2001 computer, and the other computer is unable to repair or fix, so I was just hoping I could install fresh. Although it definetly isn't working.

View 2 Replies View Related

Windows 7 Installation Can't Resume After 1st Restart

Oct 13, 2010

In Windows installation process, After installation files of Windows 7/Vista are copied, laptop can not boot anymore to resume the process. Also this occurred even after the image backup is restored on formatted C:! However, after this the laptop can not boot by any bootable DVD! - it pauses on a black screen with a blinking hyphen.

After C: is recreated and formatted, this process can be repeated!

I repeated this with a new brand HDD; That occured again! I think something wrong with my laptop (hp pavilion dv2000).

View 7 Replies View Related

Disable Restart After Device Driver Installation

Jul 1, 2011

I'm using Windows 7 Enterprise SP1 32-bit

I'm making a test equipment to test a USB device that uses a FTDI-chip (232R). This FTDI-chip has a S/N a Vendor ID (VID) and a Product ID (PID) along with many other settings.

My problem is: 1. I get a new USB device (not flashed in anyway) from the manufacturer, insert it into a USB port on the computer and windows install the standard device drivers included with this device (these are the same for every device) and no windows reboot message is visible.

2. Now I set the S/N, VID, PID to something I like, then I have to remove the USB device to set the settings. When I insert the device again Windows install the device drivers once again, but this time it prompts me with the message "Restart Now or Restart Later". I press "Restart Later" and the device works fine anyway... BUT Can I somehow get rid of this message?

View 2 Replies View Related

Windows 7 Installation Could Not Be Completed - Restart To Finish

Jan 3, 2013

I was trying to format my computer, I had installed the OS of Windows 7 Ultimate x32 bit, and decided to take the opportunity to install a new one, but this time of x64 bits, this was my first time formatting my computer but apparently didnt finish good.

1: When first restart the computer to finish installing the OS, it Said That "The intallation of windows could not be completed. To finish installing Windows, restart the installation"
2: I try to do what it say, but when I try to restart the installation with the OS disk in, I get to the same window (not sure if that's what meant by what I just explained).
3: When I turn on my computer says something like: "select the operating system you want to use", and I get the "Windows 7" option twice.

I just found out according to format the computer i had to delete the partition that was the old OS and create a new one, but I cant get to that window, because as explained in section 2 always get the same message from section 1.

View 2 Replies View Related

Email Error Code 5 / Error Code 15

Jan 19, 2010

In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?

View 1 Replies View Related

"Windows Could Not Complete The Installation, To Install Windows On This Computer, Restart The Installation"

Apr 16, 2012

First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.

This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."

View 1 Replies View Related

Browser Does Not Work After McAfee Installation, Restart A Quick Fix

Dec 5, 2012

I have installed McAfee on my computer (I know, its the worst antivirus ever, but I have a year's subscription left and I need to use it for that year being). After installation, my browser (win 8 IE9) would not work. It would say something like "Waiting for Yahoo.ca" and perpetually be like that. A quick restart would often fix the problem but more than not the next time I open the browser would not work again. I have yet to try this issue on other browsers.

View 1 Replies View Related

Windows 7 Gets Stuck After Installing Restart @ Finishing Installation?

May 12, 2012

System Specifics:

Every part of the computer is completely new.Its a selfconfigured system...

Processor: AMD FX-8120 3,1GHz
Mainboard: Gigabyte GA-970-UD3 (BIOS F4)
RAM: DDR3 2x4GB 1600MHz
Graphics: Nvidia GeForce GTX 560 TI 1GB
SSD: 120GB SATA 6Gb/s
DVD: SATA Liteone iHas122
OS: Windows 7 Home Premium 64 Bit

So basically my problem is what is stated in the topic already.Windows loads the data off of the ORIGINAL (purchased it today) DVD, extracting files etc.Then after the Computer restarts and loads, the installation process comes back up again, and shows the "moving dots" behind "Finishing Installation Process" for about 10-15 seconds, then they freeze... i left it for 2 hours. Nothing happened.I tried unplugging everything during the reset, after another try to install it. It freezes.I tried the "Shift+F10" --> explorer.exe . It freezes.I tried a downloaded copy of Windows 7 Prof.... same thing, it freezes.I tried 3 different Sata2 HDDrives, same thing it freezes.

View 9 Replies View Related

Code 0x80070017 Installation Failure?

Sep 21, 2012

Can't install Windows 7 from original DVD , I formatted the HDD twice and still, same error. The installation stops after 10-15 min with this error code 0x80070017 I know the media is in great condition, so exclude this problem. Maybe HDD failure ? I did the format and wipe via usb with MiniTool partition wizard .

View 4 Replies View Related

Need For Speed Most Wanted Installation Code

Feb 2, 2013

can u give me the installation code thx

View 1 Replies View Related

Windows 7 Code 28 Driver - Mass Storage Controller Driver - Error Code 28

Jun 13, 2012

i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed

View 1 Replies View Related

Installation Error: Setup Cannot Continue Due To A Corrupted Installation File

Sep 13, 2009

I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:

"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."

Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?

I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.

View 9 Replies View Related

Sound Driver Windows 7 Code No 28 Installation?

Oct 11, 2011

in windows 7 ultimate software the concerned sound device is not responding?

View 1 Replies View Related

Error: System File Integrity Check And Repair Error Code 0X490

Jun 28, 2011

i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490

My Hardware is:

AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory

View 6 Replies View Related

Lenovo G560 Laptop Fails To Start - Insert Windows Installation Disk And Restart

Mar 28, 2012

My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved