"Final Result: Installation Failed With Error Code: (0x80070643)
Jan 1, 2012
I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:
OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information
[code].....
View 3 Replies
ADVERTISEMENT
Jun 14, 2010
I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
View 9 Replies
View Related
Nov 17, 2012
Whenever I try to install Microsoft Security Essentials I get the error code 0x80070643
View 1 Replies
View Related
Jul 15, 2011
When I try to install this, I get an error.MSE Installation Error 0x80070643
View 10 Replies
View Related
Jan 13, 2013
I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc., and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message:
Repair Action/ System files Integrity check and repair
Result Failed / Error code = 0x490
Time Taken / 700863 ms
I've run sfc from an elevated window and it says everything is fine.
View 1 Replies
View Related
Jan 22, 2012
Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies
View Related
Nov 7, 2012
(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.
Background information (I can provide more if needed)
- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )
-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.
- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)
- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.
- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.
View 2 Replies
View Related
May 24, 2011
I received an error message- The module "mswinsck.ocx" was loaded but the call to DllRegisterServer failed with error code 0x8002801c.
View 1 Replies
View Related
Nov 23, 2011
I'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.
View 1 Replies
View Related
Jul 9, 2012
I can't launch windows media player with error message DllRegisterServer failed with error code 0x8002801c.
View 1 Replies
View Related
Jan 21, 2013
I have this issue dll registerserver failed error code 0x80020009 when I register a dll in win7 64bit.
View 1 Replies
View Related
Jan 20, 2012
I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.
View 7 Replies
View Related
Feb 4, 2013
I'm getting this error, but I can still print locally and from the network.
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 2/4/2013 8:15:49 AM
Event ID: 315
Task Category: Sharing a printer
Level: Error
Keywords: Classic Spooler Event,Printer
[Log] ........
View 4 Replies
View Related
Jan 15, 2013
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
View 3 Replies
View Related
Apr 19, 2011
I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt
View 4 Replies
View Related
Sep 10, 2010
the other day i got my computer together and started installing Windows 7 and when i hade rebooted and were on the final step it suddenly appeard white squares all over the screen and then it got black :S have been waiting like 3-4h now, anyone have a solution to my problem I heard that it could be bad ram so i took out one of em and installed Windows 7 again but I had the same problem again. then I took out the one that was there and put in the other one but same thing happend , is both broken or is it maybe something else ?Processor : intel i7 860Grafikkort : Geforce 9800gtx +moderkort gigabyte GA-P55A-UD4 P55 S-1156 ATX
View 9 Replies
View Related
Feb 3, 2010
My Dad is having problems upgrading to Windows 7 from the original Vista installation on his Medion MD8833 PC, using a Windows 7 Home Premium Upgrade Edition disk. He first tried the upgrade route from Vista and this seemed to go OK, until after the second or third reboot it would get to a point and then freeze at a blank screen, with the mouse cursor still visible. If left for a long period of time, the PC appears to go into sleep mode. Attempts to reboot at this point make it look like Windows 7 has been installed, at least partially, as it'll go through the usual Windows 7 load-up splash screens but he's unable to get to the part of the process where you have to enter your Windows 7 serial key or start setting up user accounts etc. He's tried F8 and booting into Safe Mode and various other modes but had no success here either. This often results in being told the installation process has not completed and attempts to revert to Vista are started. He's even resorted to wiping the hard drive completely (inc. recovery partition) and doing a fresh install, but has exactly the same problems.
View 8 Replies
View Related
Jan 14, 2009
I have tried installing Windows 7 in Virtual PC and on my HP 2133 netbook. Both halt when in the copy file stage with this error message:
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241 I have downloaded the iso's again (from the Microsoft partner site) in case there was a corrupt download, but I get the same error.
The VPC image was using the ISO directly, and I copied the files from the iso to a usb drive for the netbook install. Anyone else see this?
View 9 Replies
View Related
Sep 8, 2011
My Hp Pavilion Laptop dv6-3010, Windows 7, 64 bit sytem, with 8 gig Ram, will NOT complete installation of any updates.After it downloads all the updates it initiates the installation of those updatesIt looks like everything is going OK, I get the following message:Configuring Windows Update...Do NOT turn off Computer.Then I get a final message:FAILURE CONFIGURING SVS PACK. REVERTING CHANGES.I have contacted Microsoft Support and they had me do all types of fixes, reboots, and re-attempting the update procedures...but nothing seemed to correct the problemthat I go ahead and reinstall Windows 7. I really would rather NOT do that if at all possible.I have so many programs that I have installed that are critical to my business....and that would be a last resort resolution.
View 3 Replies
View Related
Jul 1, 2009
No matter how i try it I mean an upgrade or a clean install this is the error that i get : windows installation encountered an unexpected error verify that the installation sources are accessible and restart the installation error code:0xE00000100
not sure what this means.... has anyone else had this show up for them... if so whats the fix?
View 7 Replies
View Related
Jan 12, 2010
I'm having Athlon XP 2000+, 1 Gig Ram, GA-7VKMP-P,Seagate 80GB (7 Yrs old build) running with Windows Pro XPSP3
Last Saturday, I tried to install the Windows 7 Professional ( Downloaded from MSDN). When tried to boot from DVD it said " Windows Cannot Boot From this drive. CODE- 5".
I tried from my another DVD drive. Same Error.
Changed all possible jumper settings for HDD and DVD-RW's ( All IDE) as Pri- master/Slave, Sec Master/Slave. Nothing Worked.
Also I tried with another copy of Win 7 Home Premium came with my Dell Laptop (Worked fine for fresh installation in my laptop). Still same Error.
But I'm able to install both Windows 7 Home Premium and Professional in the same system, starting installation from XP (Not Booting from DVD).
Now I installed Windows 7 Pro as I said and after that I deleted Windows.old folder. All running fine.
With some curiosity, I tried to boot again from DVD drive with Windows 7 Dvd, same Error, even after installing Windows 7.
Till now I don't Know how to perform a clean installation of Windows 7 in my system.
View 11 Replies
View Related
Nov 9, 2009
I am trying to install windows live mail but it won't install. I keep getting the message something is wrong with the installer package, has anyone else come across this. the error code is
hr:0x80070643
I have googled this but still cannot find a slution. Any help would be appreciated.
View 3 Replies
View Related
Aug 10, 2010
Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
View 9 Replies
View Related
Aug 2, 2009
So This is my 3rd install disc I made and I Re-downloaded 64 bit windows 7 no problems. Integrity was checked and successful. I burned at the slowest speed 2.4x Also no errors.
Once I go to install windows 7 it jumps to 8% then 100% then i get an error saying Files are missing or corrupted. I don't see why I should have this problem since downloading and burning process went smooth.
the error code was 08007017.
I also disabled my norton or most of it.
Anybody have any ideas whats wrong I only have about 2 more discs left to burn.
View 2 Replies
View Related
Apr 26, 2009
Error code: 0x80070570 during installation 7100 x86
View 2 Replies
View Related
May 22, 2012
I have this problem with my Toshiba laptop: Several days ago my com crashed, when I started my computer on the very beginning on start up screen when it says windows is starting I get a 1 second blue screen with some saying and my laptop restarts by it self. So, ok I have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% I get this message Error Code: 0x80070570.
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taken out 1 tried to install-same error, put in another slot-same error,replaced and putted my other Ram Memory in the slots same again. So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%?
View 9 Replies
View Related
Nov 1, 2009
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
View 11 Replies
View Related
Jun 18, 2012
i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies
View Related
Nov 8, 2011
A couple of my programs/games would not launch giving me a similiar error. After some research I believed it was a problem with .NET, well now I can't reinstall it. I've tried numerous things that have been mentioned on this forum. I'm going to copy and paste the error log that Framework gives me.[CODE]
View 1 Replies
View Related
Sep 4, 2011
I bought my computer from best buy a couple of days ago and I recently got a message saying that my version of windows is not genuine. When I try to run the windows activation update it gives me "Update installation failed. Error information - 0x800B0001" and I still get the message that my windows is not genuine.
View 12 Replies
View Related
Jan 27, 2011
I have been encountering this same error code in one of my machines. I get the Error Code: 0x8007050 during installation of Win 7 Ultimate 64 Bit. It occurs during the expansion of files phase, during instalation, with the message "Windows cannot install the required files. Make sure the required files are available..."
Machine Specs:
Intel DP43TF MB
Intel Quad Core 8300 CPU
4GB OCZ ATI DDR2 RAM
Antec 500 Watt PSU
Hitachi HDS725050 KLA360 HD
and later a Seagate ST3640323AS HD.
In previous installations of Win 7, I've observed that about 29MB are copied to the System Reserved partition. In this scenario, only 11MB are copied. I've performed the following trouble shooting in order:
- Changed out the DVD drive. Tried installation again without success.
- Performed factory system restore on the hard drive. Tried installation again without success.
- Replaced the hard drive with a new one. Tried installation again without success.
- Removed all PCI cards, and tried again with just the PCI-E video card. Tried installation again without success.
- Replaced the PCI-E video card with a PCI card. Tried installation again without success.
- Cloned the "System Reserved" partition from another PC with a functioning install of the same OS. Tried installation again without success.
It should be noted that this specific machine was previously running Win 7 Ultimate 64 Bit. I was simply attempting to upgrade the hard drive. I've also tried to install Win 7 Home and Win 7 Pro, all with the exact same error code, which occurs during the same phase of installation. I also tried to perform an Upgrade install. The machine accepted a complete install of Win Vista Ultimate 64 bit (twice), but had the same error codes appear during the Upgrade install to Win 7 Ultimate 64 Bit. I reformatted and reinstalled same Vista 64 bit OS. I tried to install Win 7 Pro 64 Bit, and again encountered the same error codes. Incidentally, I have used 3 different Retail Win 7 install media. The machine passes all MemTest and CPU diagnostics.
View 3 Replies
View Related
