Restore Failed Error Code = 1117 In Windows 7 Home

Apr 19, 2011

I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt

View 4 Replies


ADVERTISEMENT

Error Code = 1117

Mar 7, 2011

I am using acer Win 7 Home Basic. Now I can't boot my windows due to "NLS Data" missing.So that I used acer recovery tools to restore Factory but I Got a time to time restore Failed - Error code = 1117 (The Request Couldnot be perfomed because of an I/O device error)

View 1 Replies View Related

Restore Failed Error Code = 0x45

Jan 22, 2012

Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.

View 5 Replies View Related

Restore Failed - Error Code 1005

Nov 23, 2011

I'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.

View 1 Replies View Related

System Restore Failed To Restore (ComPlusStaging Error)?

Jan 18, 2013

I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.

View 9 Replies View Related

Windows Update Failed - Code Error 8000ffff

Jan 15, 2013

about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.

this is the file of MGA.

Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0

[Code].....

View 3 Replies View Related

All System Files Have Been Moved To Windows.old Dir / Result: Failed. Error Code = 0x490

Jun 14, 2010

I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:

Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490

After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.

View 9 Replies View Related

Connection Failed: Error Code 23 - Raidcall

Nov 7, 2012

(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.

Background information (I can provide more if needed)

- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )

-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.

- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)

- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.

- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.

View 2 Replies View Related

DllRegisterServer Failed With Error Code 0x8002801c

May 24, 2011

I received an error message- The module "mswinsck.ocx" was loaded but the call to DllRegisterServer failed with error code 0x8002801c.

View 1 Replies View Related

DllRegisterServer Failed With Error Code 0x8002801c

Jul 9, 2012

I can't launch windows media player with error message DllRegisterServer failed with error code 0x8002801c.

View 1 Replies View Related

Dll Registerserver Failed Error Code 0x80020009

Jan 21, 2013

I have this issue dll registerserver failed error code 0x80020009 when I register a dll in win7 64bit.

View 1 Replies View Related

Error Code 80070570 For Windows 7 Home?

Jun 30, 2012

how do i fix error code 80070570 for windows 7 home

View 3 Replies View Related

Backup Failed At 57% Several Times With Error Code 0x81000039

Jan 20, 2012

I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.

View 7 Replies View Related

Error Code 315 - Printer Spooler Operation Failed

Feb 4, 2013

I'm getting this error, but I can still print locally and from the network.

Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 2/4/2013 8:15:49 AM
Event ID: 315
Task Category: Sharing a printer
Level: Error
Keywords: Classic Spooler Event,Printer
[Log] ........

View 4 Replies View Related

Error Code 800BO100 On Windows 7 Home Premium?

May 9, 2011

I have done a Google search and been the the Microsoft site. I have tried every suggestion: clean boot, MS Update Readiness Program, MS Fix-it Program, Update Reset, disabling my AV and Firewall, Manual and Automatic Update but nothing allows me to update KB2484033, KB2511250, or KB2522422. I have tried 3rd party programs to include: HijackThis, MT RUbot, ComboFix, and FixCleaner and they haven't helped. I have Spybot, McAffee, MS Defender, and I use Windows Firewall. All of these are current and update with no problem.

View 4 Replies View Related

Error Code 0Xc004F063- Windows 7 Home Premium 64Bit

Sep 11, 2012

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-73CQT-WMF7J-3Q6C9
Windows Product Key Hash: KaFG+RmurcM3ZxzWyfEP9WtPUJw=

[code]....

I downloaded a ISo file to flashDrive used JellyBean key finder and wrote the key down and then booted and reinstalled Windows 7 64Bit from flashDrive and now it gives me that error code saying The Software Liscensing Service reported tha the computer BIOS is missing a required License.

View 1 Replies View Related

"Final Result: Installation Failed With Error Code: (0x80070643)

Jan 1, 2012

I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:

OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information

[code].....

View 3 Replies View Related

Error Code 0x8000ffff In System Restore

Feb 7, 2012

Computer was running fine until I used a safe mode windows firewall sweeper in order to get rid of this nasty Trojan horse. The program ran fine and it delete just the Trojan horse "no other program or files were removed" I've tried several times to system restore but still the same error message.

Is it possible it did something to my registry and can clear CMOS work to fix it? I cannot get past the system restore screen and the bios screen can also get command prompt.

View 9 Replies View Related

Error Code 80070643, Unable To Update Or Perform System Restore

Oct 27, 2012

I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.

This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.

View 9 Replies View Related

"Code Error:0xc004E003. Description: The Software Licensing Service Reported That License Evaluation Failed"

Apr 7, 2011

When i try to activate my copy of windows 7 ultimate i get the following error message: "Code error:0xc004E003. Description: The Software Licensing Service reported that license evaluation failed"

Here are some basic info of my pc:

450 @ 2.20GHz, x64 Family 6 Model 22 Stepping 1 Processor Count: 1 Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , 32 bit Processor: Intel(R) Celeron(R) CPU RAM: 1014 Mb Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb Hard Drives: C: Total - 152624 MB, Free - 18127 MB; Motherboard: ASUSTeK Computer INC., P5KPL-VM-MUSTEK-SI, x.xx, MS1C92D09200022 Antivirus: avast! Antivirus, Updated

View 1 Replies View Related

Windows 7 Won't Launch And System Restore Failed?

Aug 13, 2011

My computer shut down unexpectedly and when I tried to start it back up it wants to perform a launch repair which fails for some reason. I have tried system restore and keep getting the following error: system restore failed to replace the fileD:\ProgramData\Microsoft\IdentityCRL\production\temp\wlidui_WLIDSVC\BUTTON.J I am not sure if this is some kind of virus and how to remove it. I also cannot start up in safe mode or at the command prompt. Nothing has been working.

View 2 Replies View Related

Backup & Restore Failed Because Of Auto-Windows 7 Update?

Aug 16, 2012

I have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch

View 6 Replies View Related

Returning To Windows 7 Home After Failed Ultimate Upgrade

May 24, 2011

I purchased a copy of Windows 7 Ultimate at an auction. I subsequently installed it on one of my computers and everything went well. Not knowing that I could only install it on one computer I then installed it on my other computer. Everything was running well for a few days and now I keep getting a message that Windows 7 cannot activate. I don't want to purchase another copy of Ultimate and want to return to the original OS - Windows 7 Home that was preloaded on my Dell computer when I bought it.

I tried to do a system restore to the date that I installed the Ultimate but it didn't work. Ultimate is still running. Do I have to do a complete reinstall from my backup recovery disks and return to square one from when my computer was new or is there something I can do to stop getting the activation error code.

If I have to return to square one and reload from my recovery disks, I will, but I am trying to get around having to go through all that work, as well as the many, many, updates I will have to wait through. I am also worried about having to reinstall all of my software, addresses, etc.

View 1 Replies View Related

ShellExecuteEx Failed; Code 170 The Requested Resource Is In Use?

Nov 29, 2012

i cannot install any .exe file. every time shows an error message ''shellExecuteEx failed; code 170 The requested resource is in use'

View 2 Replies View Related

Cocreateinstance Failed - Code 0x80040154 Class Not Registered

Feb 26, 2011

This popped up all of a sudden when I went to windows update.
"Cocreateinstance failed; code 0x80040154 class not registered".

System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, v.721, 64 bit
Processor: AMD Phenom(tm) II X4 940 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 3300 Graphics, 384 Mb
Hard Drives: C: Total - 476937 MB, Free - 375796 MB; D: Total - 76308 MB, Free - 30433 MB; F: Total - 57295 MB, Free - 26892 MB;
Motherboard: BIOSTAR Group, TA790GX 128M, , None
Antivirus: Microsoft Security Essentials, Updated and Enabled

View 2 Replies View Related

Windows 7 Code 28 Driver - Mass Storage Controller Driver - Error Code 28

Jun 13, 2012

i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed

View 1 Replies View Related

Tried To Restore They Have Failed?

Mar 13, 2011

I have restore points being created but on the occasions that I've tried to restore they have failed

View 3 Replies View Related

System Restore Failed

Mar 28, 2012

I recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?

View 7 Replies View Related

System Restore Failed?

May 15, 2012

My DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.

View 2 Replies View Related

System Image Restore Failed

Nov 12, 2011

I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.

View 4 Replies View Related

Factory Settings Restore Failed?

Mar 9, 2012

have a Packard Bell Ixtreme M5722 thats running windows 7 64 bit home premium I was advised by packard bell to do a factory restore which failed half way through with error code 1392 file system currupt. Ever since then i've been unable to start up windows. I have used a Windows 7 recovery cd that lets me into command prompt but when i run sfc /scannow it just says "there is a system repair pending which requires reboot to complete" Obviously I can't reboot as it won't let me into windows at all. The recovery Essentials tools (windows 7 64-Bit Edition) doesn't work no restore point identified on computer and i don't have a recovery disk to use (I know i should have a backup disk but recently moved and lost my cd i created in move

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved