Returning To Windows 7 Home After Failed Ultimate Upgrade
May 24, 2011
I purchased a copy of Windows 7 Ultimate at an auction. I subsequently installed it on one of my computers and everything went well. Not knowing that I could only install it on one computer I then installed it on my other computer. Everything was running well for a few days and now I keep getting a message that Windows 7 cannot activate. I don't want to purchase another copy of Ultimate and want to return to the original OS - Windows 7 Home that was preloaded on my Dell computer when I bought it.
I tried to do a system restore to the date that I installed the Ultimate but it didn't work. Ultimate is still running. Do I have to do a complete reinstall from my backup recovery disks and return to square one from when my computer was new or is there something I can do to stop getting the activation error code.
If I have to return to square one and reload from my recovery disks, I will, but I am trying to get around having to go through all that work, as well as the many, many, updates I will have to wait through. I am also worried about having to reinstall all of my software, addresses, etc.
My Windows 7 Ultimate upgrade($220) from Windows Vista Ultimate was 3/4 done judging from the progress bar. Received a command prompt stating that the upgrade failed due to corrupt installation files.On reboot I get a disc read error ctrl alt delete.I receive the same error everytime I ctrl alt delete. Is the disc corrupted by the upgrade?
I upgraded this lunchtime from Windows 7 Starter to home premium via the Windows Upgrade Advisor which said my netbook was compatible, I carried out the upgrade via the windows upgrade advisor. It worked fine for a while but I was having trouble trying to set up my LAN and wireless connection to work together in order to get onto xbox live via BT Openzone. After a while the advice from the microsoft website was to carry out a system restore, so I did and used the recommended date, however on trying to restore the ugrade failed and reverted back to windows 7 starter. Tried again and had the same issue
If I were to buy a new pc that had Windows 7 home on it. I have ultimate on my this computer and when I installed it on this computer I noticed that it asked me if I wanted to upgrade or to install a fresh copy...If I did not like the home version could use my ultimate disk to upgrade home to ultimate?
I purchased a laptop loaded with Windows 7 Home Premium edition that needs an upgrade to Spanish. I downloaded the x84 Spanish Ultimate edition but I am unsure how to proceed to minimize any mishap.
I recently bought a new laptop which came installed with win 7 home premium. On my desktop machine that it is replacing I have win 7 ultimate installed. I want to transfer the ultimate license to the laptop but when I tried to perform an install from the Windows 7 ultimate CD on the laptop I was directed to the windows store to purchase a Windows 7 ultimate upgrade.How can I use my Windows 7 ultimate disk to upgrade to Windows 7 ultimate on my laptop?
I made the mistake of getting an OEM copy of windows 7, meaning I can only install it to one motherboard, however I plan on building a new system and I was wondering whether or not I should get the full version, just so I can transfer the license to another computer in the future. Also, is it possible to upgrade an OEM version to a full version? like windows 7 x64 home premium OEM --> windows 7 x64 Ultimate full version.
Is it possible to do a clean install with upgrade version of home premium or ultimate? Meaning format everything first and then use the Windows 7 upgrade dvd to install it from scratch?
my laptop has a windows 7 home basic license before then my friend told me that he can upgrade my home basic to windows ultimate for free!! wow then i say yes ok that's cool, to cut the story short he upgrade my laptop's os. then 3 weeks after microsoft send me a message that my os is not genuine or couterfeit. damn. is there anyway i can bring back license OS?
I bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
I just loaded windows went as far as accepting key code #'s and it went to update registry and it crashed. After waiting to see if was going to reboot five minutes I rebooted and it starts with wanting an option to start windows and it will run to the start of the logo build and crashes and restarts the cycle of windows startup options ???
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs."
The installation compatibility test warns me about my Nvidia drivers, which I've attempted to both remove and upgrade to the latest version, but that doesn't seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that.
The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)."
As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference.
System specs: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
I'm trying to upgrade a computer from Vista Ultimate (32 bit) to 7 Ultimate (32 bit) and I keep receiving this error message:
"This installation disc isn't compatible with your version of Windows. To upgrade, you need the correct installation disc. For more information, check your computer's system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select Custom (advanced)."
Now, I double-checked all the system requirements and the system is compatible with 7.
I have a system I have used for a while now and I actually reformatted a few months ago. The system has been working great with no problems but recently during a boot up I noticed an issue. Right when Windows begins its setup to take you to the login screen I noticed a bluescreen and a quick reboot. So I used F8 to boot from the last known good config, no change. I went and disabled the automatic reboot after a crash so I could read the error and it's the:
"Process1_initialization_failed" error.
I looked around for that error and found this: Fix: STOP 0x0000006B PROCESS1_INITIALIZATION_FAILED Blue Screen | The Windows Club
However, when I tried to get into the C: to remove that file, it said "Access Denied" and locked me out. I have yet to be able to get into the system since. To make matters worse I gave up and decided to just reformat the drive and start fresh. However, when I load up my Windows Installation DVD it is noticeably slow, it takes 5-10 minutes to go from step to step. So I got to the "Install" button screen, clicked it and it says "Setup is starting..." and then...nothing. It just stays on that screen for a long time, I gave it 30 minutes last night. So I'm unable to even reformat.
First of all, I have 2 HDD and 1 SSD in my desktop PC and I use the SSD one for my OSThis time, this drive has Windows 7 Ultimate 64-bit (english) on it. Today, I wanted to try Windows 8. Since I am not really into virtual machines or multiple OS in seperate partitions which you can select in a menu or something like that, I decided to use an old HDD to install the new OS. I unplugged the SSD and I plugged in the old HDDEverything went cool. Windows 8 installed fine, and I tried them for few minutes. I was done for the moment (I will still use Windows 7 for a while), so I unplugged the old HDD (with Windows 8 on it) and plugged in again my SSD.My problem is this. Whenever I boot, I am getting an error which has to do with the "winload.exe" (and the environment of this is clearly windows 8!!!) and it gives me 3 options. Enter to continue (nothing happens), F8 to get into settings (nothing happens) and F9 to load another OS. The last option leads to Windows 7 boot. Everything runs fine, but I don't want to do this everytime I start my PC[CODE]
I can create documents, or really any file, and when I try and search for it in the Windows button search (Windows 7) It will say 'No Results Found' Even when I know they are there. I can find some files, but all the ones I created return no results.I tried running the MicrosoftFixit.search.Run.exe off their site, It didn't work.
I'm attempting to upgrade from 32-bit Vista Home Premium to Windows 7. I used the 32-bit disk to avoid having to do a full clean install, but every time (4 tries so far) that I've done it, it will get to the last portion of the upgrade where it transfers over all the old documents and programs. At that point the screen turns into a weird pattern of diagonal lines. Sometimes they are white and blue lines 1 inch thick, other times they are really thin lines. The machine is fairly new and high-end for a Vista machine, so the graphics card should be perfectly. I've run the Upgrade Advisor and it only mentions a couple software issues such as iTunes which I can't see as prohibiting the upgrade.
Today I began installing windows 7 ultimate on my laptop. However, I grabbed my ultimate N disk instead of my Ultimate disk. is there a way to upgrade to normal ultimate version. I have setup windows media center on every tv in my house and would like to have it on my laptop lol. I would realy rather not wipe and reinstall so i dont have to install all the drivers and anitvirus again...