I recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?
View 7 RepliesI have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedMy DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.
View 2 Replies View RelatedI have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies View RelatedI was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
My computer shut down unexpectedly and when I tried to start it back up it wants to perform a launch repair which fails for some reason. I have tried system restore and keep getting the following error: system restore failed to replace the fileD:\ProgramData\Microsoft\IdentityCRL\production\temp\wlidui_WLIDSVC\BUTTON.J I am not sure if this is some kind of virus and how to remove it. I also cannot start up in safe mode or at the command prompt. Nothing has been working.
View 2 Replies View RelatedI tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...
View 2 Replies View RelatedAll discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies View RelatedA few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI have restore points being created but on the occasions that I've tried to restore they have failed
View 3 Replies View Relatedhave a Packard Bell Ixtreme M5722 thats running windows 7 64 bit home premium I was advised by packard bell to do a factory restore which failed half way through with error code 1392 file system currupt. Ever since then i've been unable to start up windows. I have used a Windows 7 recovery cd that lets me into command prompt but when i run sfc /scannow it just says "there is a system repair pending which requires reboot to complete" Obviously I can't reboot as it won't let me into windows at all. The recovery Essentials tools (windows 7 64-Bit Edition) doesn't work no restore point identified on computer and i don't have a recovery disk to use (I know i should have a backup disk but recently moved and lost my cd i created in move
View 4 Replies View RelatedSo I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View Relatednot A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedTrying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies View RelatedI'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.
View 1 Replies View RelatedI was trying to restore my OS from a back up I made but when I run it, it comes up with this message: "restore failed because a disk which was critical at backup is excluded. to continue you need to either remove the disk from exclusion list or detach it from machine or clean it using diskpart utility, and then retry restore. if you cannot clean or detach it then change the disk signature".
View 1 Replies View RelatedI have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedMy Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View Relatedmy Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View RelatedI lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies View RelatedI have an Acer Aspire AX3400 desktop running Windows 7 64bit. I have been having all sorts of problems over several months. The machine, when left unattended, appears to be always "recovering from serious error" with subsequent memory dumps. The machine would not shut down without me having to switch it off. Subsequently the machine would not start up properly. iTunes would not open without a reboot etc etc etc.I decided to backup all my data and restore to factory settings. This has failed/ is incomplete. It hung for several hours at different stages of the process. I keep getting the message "Setting up PC for first use" and does not move on from there
View 8 Replies View RelatedI have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt
View 4 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View Related