System Restore Fail On All Available Restore Points
Feb 15, 2012
System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies
ADVERTISEMENT
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jan 30, 2013
ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies
View Related
Feb 6, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies
View Related
Feb 8, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
View 1 Replies
View Related
Jan 19, 2009
It seems my Win7 system is only retaining the last restore point created.I have configured it to save files and settings, and use 5% (5+gb) of available space (Win7 installed on a small partition for now). I can never see more than one available restore point even after ticking the "Show more restore points".
View 9 Replies
View Related
May 26, 2011
When I open system restore and click more restore points...I get about 60 different restore points dating back to last June.In CCleaner...theree are only about 10 dating back to last week ?Are these 5 dozen restore points a problem and is there a way to get rid of them without losing all recent restore points ?
View 4 Replies
View Related
Feb 1, 2012
I get this message when trying to do a system resore "No restore points have been created on your computer's system drive. To create system restore point open System Protection.I have checked that system protection is turned on and the option selected is "Restore system settings and previous versions of files".I have also set the maximum Usage to 30GB. I have tried to create a couple of restore point and it goes through the motions OK but on checking find that none have been created!I have AVG 2012 fully updated and have run a full scan also have the latest Malwarebytes installed and ran a scan with that.
View 5 Replies
View Related
Sep 24, 2012
Having just had en error where I get 'non nsystem disk' message (now solved, I discovered in the process that there were no system restore points since January. I have been in task scheduler and it is set to create one on boot and one at midnight
View 5 Replies
View Related
Apr 28, 2012
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
View 3 Replies
View Related
Feb 10, 2012
When I had XP,there was a separate folder containing System Restore Points. Has win 7 Home Premium got anthing similar? If so where do I find it?
View 13 Replies
View Related
Jan 22, 2011
Does Running Defrag (Windows 7) modify or impact established Restore Points?
View 2 Replies
View Related
Dec 14, 2011
I own a 4GB Thinkpad SL510 laptop, running Windows 7 Pro 64-Bit w SP1 installed.Lately, I have noticed that my System Restore points disappear. When I open SR and look for restore points, none are there.To test this,I create one and it creates successfully. I go back and check after a while....and it's GONE. There is no apparent pattern of WHEN they disappear. Sometimes they go after a re-boot, sometimes they stay around for a day or so, then disappear. Sometimes they go away while the computer is still on.I would guess that this started about 1 week ago...at least that's when I first noticed it.There is a common error in the event log which I attached here. This seems to coincide with the time I no longer have restore points.The shadow copies of volume C: were aborted because of an IO failure on volume C:.I increased the amount of space for system restore to 40GB (which should be more than enough...this is 20% of my C Drive. I used to have this at 10% with no problems in the past.I've scanned for viruses and nothing comes up.I also ran CHKDSK C: /f /r and I found 4kb with bad sectors but no other areas.
View 5 Replies
View Related
Sep 23, 2012
I noticed my restore points were being deleted for some reason and I went to the System restore settings of my computer, and being oblivious to what I was looking at I confused my recovery drive with my C: and I turned it on and gave it a gig of disk space usage. After I realized I was configuring the wrong one I went back turned it off and deleted restore points but It won't let me put the max usage back to zero it will only let me keep it at 2% (320.00MB).Is this going to cause any problems or is it fine?
View 1 Replies
View Related
Sep 26, 2012
I would like to do a system restore, but when I try to do so (system protection/system restore), it tells me that "no restore points have been created on your hard drive".
2 weeks ago I successfully did a system restore, and I have not changed any settings since then. My recovery partition is still in place, the disk manager says the recovery drive has 8 GB out of 15 GB free. Could the restore point be in my recovery partition, but for some reason Windows isn't seeing it? How would I view the recovery partition to check?
View 4 Replies
View Related
Jun 25, 2010
Why are my Windows system restore points disappearing?I am having problems with my system restore points in Windows 7. I create the restore points, but when after I shut down my PC, they are gone. This is happening with all restore points that the system creates also, such as when it installs updates. I have tried everything suggested online. I made sure that system restore is on, I checked the service, and I set volume shadowing to automatic. Why are Windows system restore points disappearing?
View 29 Replies
View Related
Jan 5, 2009
How to Delete System Protection Restore Points in Windows 7 ?
View 0 Replies
View Related
Feb 5, 2013
I am losing my system restore points and my computer is not creating them on its own.
View 5 Replies
View Related
Dec 1, 2008
This tutorial will show you how to delete the System Protection restore points in Windows 7.
View 0 Replies
View Related
Nov 25, 2012
I got message in Word that there was insufficienmt memory to perform an operation so I rebooted. My PC wouldn't reboot and there was no last known good configuration so I ended up having to reinstall windows (had only installed it a month ago) Why should there have been no restore pointsa? Doesn't it automatically set them?
View 1 Replies
View Related
Jul 20, 2012
I had reason to check my System Restore function today and found only 3 points to choose from. One from July 15, 2012, another from 2011 and the last from 2010. Obviously two of them are worthless. I understood that a new restore point should be added each week, or at a major change of some sort. How do I change this so that more points are added as time goes by? One each week would be just fine. I can't find this option in Win 7 as I recall was available in XP.
View 9 Replies
View Related
May 29, 2012
In my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
View 14 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Jul 28, 2012
I am currently running Windows 7 Home Premium 64 bit, and I encountered a problem today with scanning using the printer (Printing was alright). I can only remember vaguely as I thought it some kind of connection error, I was using a USB cable and it was working find earlier. Spent hours googling to no avail, so I decided to use System Restore to restore to yesterday where it was working perfectly. So when the laptop started the process through -Control Panel> Recovery> Open system restore it logged out and everything, but hung at initializing for about 40 minutes, I googled that with another laptop and 99% of them said I should turn on my laptop with the button, then try the System Restore in the boot options when choosing the Repair Computer option. Guess what! That also didn't work. Well I started windows normally after the second power off, turned on without any problems, but then realized in the taskbar it shows the Ethernet wire connection for internet where I am connected wirelessly, I check my network adapters through Network & Sharing centre and the adapters are missing. I start panicking and instantly check device manager, its blank (Plug and Play is on). At that point I'm pissed off when I remember that when I started the laptop again, ATI gave me a message that no drivers were found. Have all my drivers been deleted?If my network adapters are missing,how am I connecting to the net? I also checked msconfig, tried a clean boot (Hopeless), but also noticed many Microsoft services are stopped. I just tried to scan again now to get an error message but the printer was not found, I figured this was from deleted devices?
View 9 Replies
View Related
Feb 19, 2012
I was having issues with my optical drive and foolishly followed the advice of Emachines tech support. I performed a system restore to original factory settings that was supposed to move my user files to cbackup. It all failed. My computer now gets stuck on "Windows is loading setup files" or something, and the. I get a dialogue box saying installation failed and would continue after restart.I have tried using a system recovery disc, and get the same issues. I have tried to get it to boot in safe mode, last known good, and get the same error and restart cycle. Memory tests show no issues and I am at my last wit because there were important documents and photos I can't ever get back. I do have a backup drive but it was a few hundred gigs too small, and so I couldn't backup everything I need
View 2 Replies
View Related
Nov 13, 2012
I am having some issues playing Starcraft II that I didn't use to have when I first assembled the computer. I wanted to restore back to where I was several months ago, but the restore point isn't listed in System Restore. In fact, only 3 restore points are offered and they are all in the last few days.I looked at the space available to save these restore points and it was only using 1.59 GB of an allowed 2% which is 10 GB
View 2 Replies
View Related
Jan 14, 2013
When my PC wouldn't boot a few months back I thought I was safe with system restor. Wrong , there were no points there to restore to. A few week ago when I was having problems there were no restore points either and I discovered the upgrade install method, and got going again. Having recently been helped with PC crashing several times a day (by uninstalling catalyst Control Centre), I seem to be up and running normally again, but there are no rstore points. I asked about this serveal months back and I seem to remember that there is no automatic creation of restore points (ideally twice a week would be good). I followed instructions to set this up, but still they weren';t there when I needed them.
View 1 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related