So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 RepliesSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedWhile System Restore usually does what it is supposed to do, sometimes it doesn't. When I am intending to do something a bit drastic or unusual on my desktop now, I routinely make a full registry backup. (Start/Run/type REGEDIT/OK/File/Export. Name and save the file in Documents) On my machine this takes 20 - 30 secs and results in a file around 200 MB. I have never had to use one of these backups to restore this machine so far
View 14 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View Relatednot A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedI have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedMy Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View Relatedmy Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View RelatedI lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies View Relatedive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies View RelatedI am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies View RelatedI recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .
View 1 Replies View RelatedI can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
How to Backup and Restore the Windows 7 Registry ?
View 0 Replies View Relatedwhat is the command for a factory restore using command prompt i can only use the command prompt my computer wont let me do anything else. i have a dell inspiron n5010
View 14 Replies View RelatedWhen I use system restore, it seems to work, but after restart I get this message:System Restore did not complete successfully. Your computer�s files and settings were not changed.
Details: System Restore failed to extract the original copy of the directory from the restore point.Source: %SystemRoot%
egistration
Destination: CompuPlusStaging
I'm running W7 Home Premium on a Dell 7310 laptop.
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
View 3 Replies View RelatedI have lost my user account and folders and files, music and pictures . I have tried system restore but no success.
View 8 Replies View RelatedI recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
View 10 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedI have had this problem for quite a while. I'm able to create restore points (and they show up in the list), but I'm unable to 'restore' them... I get the system cannot restore error. I have Norton-Comcast and have deactivated 'tamper protection' with no luck.
View 3 Replies View RelatedI had reason to check my System Restore function today and found only 3 points to choose from. One from July 15, 2012, another from 2011 and the last from 2010. Obviously two of them are worthless. I understood that a new restore point should be added each week, or at a major change of some sort. How do I change this so that more points are added as time goes by? One each week would be just fine. I can't find this option in Win 7 as I recall was available in XP.
View 9 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.