Windows 7 Won't Startup, System Repair And System Restore Failed?

Feb 15, 2013

Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.

View 6 Replies


ADVERTISEMENT

After Ran Startup / Repair System Restore Failed

Aug 6, 2012

I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.

-What I did Messed with memory in Msconfig

-What I have access to in Startup Repair Cmd

-What I tried System restore Startup Repair

View 1 Replies View Related

[DRIVERS] Computer Will Not Boot Normally, System Repair And Restore Failed

Jan 4, 2013

A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...

Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)

[code]....

View 3 Replies View Related

Unable To Startup Repair And System Restore

Jan 15, 2012

I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.

View 1 Replies View Related

Unable To System Restore From Startup Repair

Feb 16, 2012

i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.

View 2 Replies View Related

Laptop Won't Boot Up - Startup Repair And System Restore / None Will Finish

Oct 21, 2012

My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7

View 15 Replies View Related

Dell XPS Crashes .System Repair,system Restore ,safe Mode Don't Work

Mar 8, 2012

I am having the following system configuration

XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive

Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.

View 3 Replies View Related

System Repair / System Restore Not Working

May 8, 2011

The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.

View 3 Replies View Related

System Restore Point : Create At System Startup

Feb 27, 2010

How to Automatically Create A System Restore Point at Startup ?

View 0 Replies View Related

Windows 7 Randomly Crashes On Startup Or Requires System Repair On Startup

Jan 14, 2011

Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.

View 9 Replies View Related

Windows 7 Failed To Start, System Repair Can't Discover?

Oct 20, 2012

been searching all over the internet on an alterative machine for a solution to a problem that occurred about an hour ago.To offer background on the machine:I upgraded it last summer with a 60gb Solid State HD to host the OS and a 700gb HD to host the bulk non-system essential files and appsI've had no anti-virus on it but occasionally run the Microsoft free Scan & Repair along with Iobits cleanup suiteThere's been this Win7.CH Trojan Horse that is occasionally detected for the past 6 months and even though I select to fix and repair, it always comes backThe machine will occasionally crash after exiting a high performance application like a videogameAfter installing the Planetside2 videogame Beta on the 700gb drive, my SS drive began to become strangely over-stuffed with files, and I could not narrow down where they originated. I uninstalled a few unessential Iobit programs and cleared my downloads and recycle bin, then something even stranger happened. The SS drive had 16gb free, while this entire time I've had it I've only managed to keep it about 2-4gb free, and the file clogging stopped from what I could tell.Anyway, a week or so later, after exiting the Planetside2 Beta application earlier the machine crashed (unsurprisingly) but upon startup, did not recover.

Startup repair unsurprisingly can't fix it, and I receive the following problem signature:The Windows Repair Problem Signature Problem Event Name: Startup Repair Offline Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: Unknown Problem Signature 4: 21200506 Problem Signature 5: AutoFailover Problem Signature 6: 17 Problem Signature 7: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033decided to give the posted solution a go since it seemed so similar to mine.Unfortunately I did not realize that the tech tailored the solution specifically to the posters scan results, so when I tried to use the same solution, it didn't work.I'm quickly realizing that my problem is not the same...What I've tried so farI ran Chkdsk and it said F parameters aren't specified and it only took a millisecond to complete showing nothing wrong.The Startup Repair scan returns are all "0x0" errors.The afformentioned forum posts solution didn't work since it wasn't specified to my machine

View 6 Replies View Related

Windows Failed To Start, Unable To Run System Repair

Jan 21, 2013

I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.

My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.

View 3 Replies View Related

Windows 7 Won't Launch And System Restore Failed?

Aug 13, 2011

My computer shut down unexpectedly and when I tried to start it back up it wants to perform a launch repair which fails for some reason. I have tried system restore and keep getting the following error: system restore failed to replace the fileD:\ProgramData\Microsoft\IdentityCRL\production\temp\wlidui_WLIDSVC\BUTTON.J I am not sure if this is some kind of virus and how to remove it. I also cannot start up in safe mode or at the command prompt. Nothing has been working.

View 2 Replies View Related

System Restore Failed To Restore (ComPlusStaging Error)?

Jan 18, 2013

I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.

View 9 Replies View Related

System Restore Failed

Mar 28, 2012

I recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?

View 7 Replies View Related

System Restore Failed?

May 15, 2012

My DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.

View 2 Replies View Related

System Image Restore Failed

Nov 12, 2011

I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.

View 4 Replies View Related

System Files Integrity Check And Repair - Result Failed

Jan 13, 2013

I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc., and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message:

Repair Action/ System files Integrity check and repair
Result Failed / Error code = 0x490
Time Taken / 700863 ms

I've run sfc from an elevated window and it says everything is fine.

View 1 Replies View Related

Cannot Repair Or System Restore

May 9, 2011

Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.

View 5 Replies View Related

Windows 7 Won't Boot / System Repair / Restore / Safe Mode Won't Work

Jan 1, 2013

I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)

View 9 Replies View Related

System Restore To Factory Settings Failed?

Jan 1, 2013

I tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...

View 2 Replies View Related

64bit Laptop Crashed And Won't Start On Safe Mode, System Repair Failed?

Jul 17, 2012

i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed

View 2 Replies View Related

Restore System Image Onto A New Boot Drive Since Old One Failed?

Jul 31, 2011

All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?

View 4 Replies View Related

Windows 7 Won't Start Up / Startup Repairs And System Restore Can't Fix

Jan 28, 2013

I bought Acer aspire one D270. My computer worked fine for 1,5 week. But I got blue screen at last night.I tried startup repairs and system restore. [code]

View 1 Replies View Related

System Undergoing Startup Repair Without Any Results?

Jun 29, 2012

My system undergoes startup repair everytime i start my computer and after a long process of searching for problems it restarts and the same startup repair problem arises. It also displays the message "This may be caused due to a recent change in any hardware or software of the system". I hv infact installed windows 2-3 times since this prblm started bt still this problem arises.

View 2 Replies View Related

Using The Repair Disk When System Restore Doesn't Work

Jan 1, 2013

I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...

View 1 Replies View Related

System Restore Saying No OS Installed - Repair Stuck In Loop

Jan 26, 2012

Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.

View 9 Replies View Related

System Immediately Boots To Startup Repair - No Access To F8

Jan 4, 2013

So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall. As I didn't want to lose any of my files, drivers or programs. All seemed like it went well until the computer rebooted for the last time before it reaches the " Setting up for first use " dialog Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E

After a large amount of reluctant clicking The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing, Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog

I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.

I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).

View 1 Replies View Related

After A System Restore Computer Won't Startup

Jan 14, 2013

my computer says windows is starting up, then windows is shutting down.

View 1 Replies View Related

How To Set System To Last Restore Point At Startup / Shutdown

Sep 27, 2012

At my school, every time you shut down the computer it wipes all user data (I believe) from the primary drive (or partition). So, every time the computer is started the primary drive/partition reverts to whatever restore point the IT department has set. I would like to do this to my personal computer, but the question is how? Is it something I can set the task scheduler to do? By doing some research I found that I can (not that I want to) create a new restore point at every start up with task scheduler, so it seems only logical that I can load a restore point of my choice at every start up without having to physically go into system restore at every start up.

I have 2x 600GB WD Velociraptors in RAID 0 configuration divided into 2 partitions. The (primary) C: contains Windows 7 Pro x64 and related files and the (secondary) G: has everything else (i.e. all of my developer tools, games, and misc files that all have a scheduled back up onto an external). I would like the C: to revert to the restore point of my choice at every start up. If it is a "simple" script to perform this task...great! But, if it requires extreme diligence (like an entire IT department to maintain)... forget it, it's not that big of a deal.

View 6 Replies View Related

System Restore Starts And Restores Every Time At Startup?

Jan 20, 2012

this problem started since i used system restore.i have to reinstall something everytime i boot it!

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved