Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
View 5 RepliesI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedThe other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies View RelatedI was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies View Relatedi got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies View RelatedI have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies View RelatedLast night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
View 9 Replies View RelatedMy Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies View RelatedA few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies View RelatedSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies View RelatedCreated it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
my Windows 7 64-bit computer acted oddly (after it accidentally got unplugged while on, tho not sure that's what did it). now when i boot i get as far as the windows 7 logo starts to show, then i get that it can't boot.
i changed nothing that i know of. repair says it can't. restore, which only lists points from 3 days ago, doesn't work. i did a memory test. it was fine. am i doomed to do a clean re-install of Windows 7?
btw, if i get that Windows 7 logo, and also a stage where it says it is loading files, that means it is reading from my hard drive, right?
my Windows 7 64-bit computer acted oddly (after it accidentally got unplugged while on, tho not sure that's what did it). now when i boot i get as far as the windows 7 logo starts to show, then i get that it can't boot. i changed nothing that i know of.
repair from my bootable Windows 7 disk says it can't. restore, which only lists points from 3 days ago, doesn't work. i did a memory test. it was fine.
am i doomed to do a clean re-install of Windows 7?
btw, if i get that Windows 7 logo, and also a stage where it says it is loading files, that means it is reading from my hard drive, right?
Started laptop (Lenovo) opened fine, but no connectivity to internet. Desk top PC close by, has internet.Tried to RestoreLaptop did not, shut down after 30 minutes. Tried System Repair, did nothing for 45 minutes. Shut down, restarted, did not open.
View 1 Replies View RelatedSo I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View Relatednot A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedI have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedProblem: This morning I had a brief 1 second power outage while I was using my computer which forced it to shutdown. It just stood there shutting down for about 15 minutes when i decided to click force shutdown. After restarting, computer ran checkdisk and startuip repair because windows was not loading.
Issues; I ran chkdsk a couple times, lots of bad sectors./index files repairing recovering, but it ends up hanging at stage 4 at a certain spot. I left it running at that spot for over 5 hours and just stood there(I went to sleep and woke up at same spot). I booted with windows 7 cd and tried startup repair, the first 3 times it said it couldnt repair. It only showed 2 restore points available and both gave error messages saying they couldnt load. I ran a checkdsk /r again and was fixing a lot of stuff and hung at same spot again. Tried another startup repair, this time it said it worked but still the same problem, windows isnt loading. However, I am able to get to the login screen now after waiting about 10 minutes at the windows logo however my kieyboard/mouse functionaility seems to be gone so i cant even type my password to login at that point. I ran a diagnostic in the boot menu, when checking the harddrive it gave me an error. Ive tried booting to every option available, safe mode, safe mode with networking, safe mode with command prompt etc, nothing works. It brings me to logon screen after a long time but keyboard./mouse dont work at that point. Now, like i said i dont want to reformat my computer and lose all my files. My keyboard/mouse work with the windows 7 bootup cd doing those menus but not when it gets to logon screen booting the normal way. I was thinking of buying an external drive and installing windows on there and booting from there but im not sure if my computer would recognize it since it wont recognize my keyboard and mouse at login screen.
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
View 3 Replies View RelatedI've had prolonged problems with my computer; blue screen crashes around 5-10 times a day, everyday for past 2 years. Anyway my problem today is that finally it will not start up. I get the start repair (recommend) or start windows normally. The latter of the two just fails and restart the computer. When clicking repair it say it cannot repair automatically, I have also gone into advanced boot settings and tried safe mode which also failed and restarted the computer the same goes with trying last good configuration which also does the same. I have also tried repair disc and back up disc I have but I don't if it some I'm doing wrong but they are not loading.
View 33 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedMy Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View Relatedmy Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View Related