[DRIVERS] Computer Will Not Boot Normally, System Repair And Restore Failed
Jan 4, 2013
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
View 3 Replies
ADVERTISEMENT
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Aug 6, 2012
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
View 1 Replies
View Related
Feb 19, 2012
Basically the issue is that my computer won't boot. I have had it for just over a year and have never had any issues with it. It's protected and isn't used for anything dodgy, my brother uses it for SWTOR and I use it mostly for uni work and a bit of gaming here and there. Anyway out of nowhere it failed to start. Its done this once before and last time I just told it start Windows normally and everything was fine. This time not so much.
It loads up Startup Repair even if I select start Windows normally as it fails to do so and restarts itself automatically. I left it to detect errors but when I checked it a few hours later it still said searching so I cancelled and left it. I tried again yesterday and have left it on for approximately 25 hours to no avail, it still says searching! I have a lot of stuff I haven't backed up so I want to save it. Also note that there are no pieces of hardware plugged into the machine at all, only the mouse, keyboard and monitor.
Basic Info :-
Acer
Windows 7 x64
8 GB Ram
500GB HDD
NVIDIA G Force 950
View 3 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Jun 24, 2012
Earlier this evening I downloaded My Colors and put it on my computer. For some reason it wouldn't load up all the icons and was messing up my browser when I would go online. I did a system restore back to a previous date. Now I am in a huge mess. It will not boot up fully. I get a window with an easy access button in the lower left corner and a shut down button in the lower right corner and that is it. I don't want to do a full restore. I have a Dell Inspiron 1545 laptop. It is running Windows 7. I'm not sure what more information you need or that I can really get to you at this time.
View 4 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Mar 28, 2012
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Apr 27, 2011
My OS is Windows 7 Ultimate x64 and its boot by vhd.
One day, it failed to go to Windows and stuck at Startup Repair. I think it was caused by invalid driver.
But anyway, my concern is the Startup repair is unable to repair a Windows that is installed in a vhd. Then what should I gonna to do?
View 1 Replies
View Related
Oct 20, 2012
been searching all over the internet on an alterative machine for a solution to a problem that occurred about an hour ago.To offer background on the machine:I upgraded it last summer with a 60gb Solid State HD to host the OS and a 700gb HD to host the bulk non-system essential files and appsI've had no anti-virus on it but occasionally run the Microsoft free Scan & Repair along with Iobits cleanup suiteThere's been this Win7.CH Trojan Horse that is occasionally detected for the past 6 months and even though I select to fix and repair, it always comes backThe machine will occasionally crash after exiting a high performance application like a videogameAfter installing the Planetside2 videogame Beta on the 700gb drive, my SS drive began to become strangely over-stuffed with files, and I could not narrow down where they originated. I uninstalled a few unessential Iobit programs and cleared my downloads and recycle bin, then something even stranger happened. The SS drive had 16gb free, while this entire time I've had it I've only managed to keep it about 2-4gb free, and the file clogging stopped from what I could tell.Anyway, a week or so later, after exiting the Planetside2 Beta application earlier the machine crashed (unsurprisingly) but upon startup, did not recover.
Startup repair unsurprisingly can't fix it, and I receive the following problem signature:The Windows Repair Problem Signature Problem Event Name: Startup Repair Offline Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: Unknown Problem Signature 4: 21200506 Problem Signature 5: AutoFailover Problem Signature 6: 17 Problem Signature 7: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033decided to give the posted solution a go since it seemed so similar to mine.Unfortunately I did not realize that the tech tailored the solution specifically to the posters scan results, so when I tried to use the same solution, it didn't work.I'm quickly realizing that my problem is not the same...What I've tried so farI ran Chkdsk and it said F parameters aren't specified and it only took a millisecond to complete showing nothing wrong.The Startup Repair scan returns are all "0x0" errors.The afformentioned forum posts solution didn't work since it wasn't specified to my machine
View 6 Replies
View Related
Jan 21, 2013
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
View 3 Replies
View Related
Mar 28, 2012
I recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?
View 7 Replies
View Related
May 15, 2012
My DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.
View 2 Replies
View Related
Jan 13, 2013
I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc., and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message:
Repair Action/ System files Integrity check and repair
Result Failed / Error code = 0x490
Time Taken / 700863 ms
I've run sfc from an elevated window and it says everything is fine.
View 1 Replies
View Related
Nov 12, 2011
I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies
View Related
May 9, 2011
Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
View 5 Replies
View Related
May 8, 2011
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies
View Related
Mar 7, 2012
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
View 1 Replies
View Related
Oct 3, 2012
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
View 3 Replies
View Related
Aug 13, 2011
My computer shut down unexpectedly and when I tried to start it back up it wants to perform a launch repair which fails for some reason. I have tried system restore and keep getting the following error: system restore failed to replace the fileD:\ProgramData\Microsoft\IdentityCRL\production\temp\wlidui_WLIDSVC\BUTTON.J I am not sure if this is some kind of virus and how to remove it. I also cannot start up in safe mode or at the command prompt. Nothing has been working.
View 2 Replies
View Related
Jan 1, 2013
I tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...
View 2 Replies
View Related
Jul 17, 2012
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies
View Related
Jan 15, 2012
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies
View Related
Feb 16, 2012
i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies
View Related
Feb 17, 2012
I installed a new MOBO last night (17/02/2012) and booted up and my Windows 7 could not boot. It went into repair mode and could not repair.
So I installed a new Windows 7 and now see the Windows.old folder. I would like to recover the huge amount of settings and personalisation from the old Windows system.
I have not communicated with anyone who has REALLY had a Windows recovery ever work.
If anyone knows, this is the perfect time for me to be shown the light.
View 4 Replies
View Related
Oct 5, 2011
I am currently using windows 7 ultimate x64. I was in the middle of a process restoring my computer to a few days back and suddenly it froze. I did a power shut down and when I turned it back on, I wasn't able to get back into windows. I was brought to startup repair and it gave me errors. 'Boot manager failed to find OS loader'. There was options for restoring, but all my restore points were gone. Recovery wasn't able to find image backup.
"Startup repair cannot repair this computer automatically". I was told to go into safe mode to restore, but whenever I enter safe mode, startup repair would take over and shows the same errors, also I read a tutorial using a repair disc ( made a copy of it on someone elses ultimate x64 computer) and I get the 0x00000e9 error if i boot from disc. What can I do? As of now I don't have the installation disc with me. I wont be able to get hold of it until tomorrow. There's a lot of important files in that hard drive and I really cant lose any.
View 6 Replies
View Related
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
View Related
Jan 26, 2012
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
View 9 Replies
View Related
