Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedI found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedOkay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
View 14 Replies View RelatedI am using an original version of the windows 7. And recently ( I really don't know what happened) my PC won't start normally. It also says that windows Start-up repair can't fix the problem. What should I do ( I don't want to reformat cause I lost my windows 7 installer ).
View 6 Replies View RelatedI just finished putting my computer together, and i'm installing OEM Windows 7 64-bit from the disc. after windows loads files, i get a black screen and error message that says: "Windows failed to start. a recent hardware or software change may be the cause. to fix the problem, then it gives me the repair computer steps. it also says
File: windowssystem32
toskrnl.exe
Status: 0xc0000098
Info: windows failed to load because the kernel is missing or corrupt."
I don't know what to do because i can't access windows at all, is there something i can do in BIOS to fix this?
GIGABYTE 970A DS3
AMD FX-6100
XFX Radeon HD 7850
Crucial Ballistics (2x4)
been searching all over the internet on an alterative machine for a solution to a problem that occurred about an hour ago.To offer background on the machine:I upgraded it last summer with a 60gb Solid State HD to host the OS and a 700gb HD to host the bulk non-system essential files and appsI've had no anti-virus on it but occasionally run the Microsoft free Scan & Repair along with Iobits cleanup suiteThere's been this Win7.CH Trojan Horse that is occasionally detected for the past 6 months and even though I select to fix and repair, it always comes backThe machine will occasionally crash after exiting a high performance application like a videogameAfter installing the Planetside2 videogame Beta on the 700gb drive, my SS drive began to become strangely over-stuffed with files, and I could not narrow down where they originated. I uninstalled a few unessential Iobit programs and cleared my downloads and recycle bin, then something even stranger happened. The SS drive had 16gb free, while this entire time I've had it I've only managed to keep it about 2-4gb free, and the file clogging stopped from what I could tell.Anyway, a week or so later, after exiting the Planetside2 Beta application earlier the machine crashed (unsurprisingly) but upon startup, did not recover.
Startup repair unsurprisingly can't fix it, and I receive the following problem signature:The Windows Repair Problem Signature Problem Event Name: Startup Repair Offline Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: Unknown Problem Signature 4: 21200506 Problem Signature 5: AutoFailover Problem Signature 6: 17 Problem Signature 7: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033decided to give the posted solution a go since it seemed so similar to mine.Unfortunately I did not realize that the tech tailored the solution specifically to the posters scan results, so when I tried to use the same solution, it didn't work.I'm quickly realizing that my problem is not the same...What I've tried so farI ran Chkdsk and it said F parameters aren't specified and it only took a millisecond to complete showing nothing wrong.The Startup Repair scan returns are all "0x0" errors.The afformentioned forum posts solution didn't work since it wasn't specified to my machine
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View RelatedYesterday I have installed Mirrors edge to my laptop Asus k50ab, I have windows 7 64 bit, after playing the game, I restarted pc, and then it just failed to start and pc restarted, same thing in all safe modes. I think its problem with graphic card update, i have ATI , and probably installed Nvidia update...
Always writes this error: "A problem has been detected and windows has been shut down to prevent damage to your computer."
Technical information:
*** STOP: 0x0000007B (0xFFFFF88009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)"
I tried almost everything, but i think if i will delete that update or something , it will run..
have beeen reading through this amazing forum for the past couple of days trying to get my Dell 1545 working again, i have tried to reinstall the OS from a disc that came with the lpatop, to no availi created a system restore disk from the machine i'm writing this on....still to no avail....i can get into the setup menu's but like many others i can't get any further, I don't know how to get into the BIOS menu (and to be honest wouldn't know what to do if I did
View 9 Replies View RelatedI have a computer I am trying to refurbish. The old hard drive failed. I purchased a new hard drive. The CD/DVD player on the computer does not work, but I am able to boot from a USB. I was able to install Ubuntu from USB with no problems and now have a new copy of windows 7, 32 bit (computer is also 32 bit). I have tried to boot from the windows copy on the USB drive using many different tutorials as well as using the windows USB/DVD download tool. Each time I boot from the usb stick, a screen comes up that says windows failed to start. It says it may be due to a hardware problem. All other solutions to this involve using the recovery CDs or partition which I am not able to because the CD/DVD drive is broken, and I would like to not have to buy another one.
View 3 Replies View RelatedI have been trying to use the installer dvd to try and repair windows. At the screen where I can select to load drivers, I don't see an option from the place that says "Select an operating system that you want to repair". I hit next, and I go the startup repair from recovery tools. Every time I run the tool, I get a message that says that the tool may have completed successfully, reboot to find out
View 9 Replies View Relatedi just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies View RelatedI have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?
I have a pc that has been running windows 7 pro fine for a couple of years. Today it wont boot stopping with the message: "Windows failed to start.A recent hardware or software change might be the cause."
To fix the problem:
1.Insert windows installation disc and restart your computer
2.Choose your language settings and then click "next"
3.Click "repair your computer".
If you do not have this disc contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
This machine has only one dvd drive and one hdd. I have checked the boot list in the bios settings and the cd drive is first then the hdd second. If I insert the windows 7 cd and press any key to boot from cd when prompted I still end up at the "windows failed to start " screen. At this point I have the option to select "Launch startup repair" or "start windows normally" but I cant select them, the machine just counts down and continues to try to launch startup repair and fails with the 0xc000000e error.
odd problem really and not even sure when it started.But when ever the system starts (reboot or cold) there is no usb drivers installed or the firewire unibrain driver.I go to devices and printers and there is the esclamation sign over the icon for for computer then right click it press trouble shoot and it sorts it self out.
View 4 Replies View Relatedsony vaio PCG-71314L
on turning on, hangs at "windows is starting" for ever
F10 says "disc read error"
F8 says "no operating system found"
booting/repairing/reinstalling from CD hangs at "windows is loading" for ever
how could i get it to boot/repaired/reinstalled?losing all data on HDD is fine, just need to make it work again.
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. Choose your language settings, and then click "next". 3. Click "repair your computer". Ya-da ya-da..I have a Samsung SF510 laptop running Windows 7 x64. Anyways, I burned an ISO to a disk (downloaded from this forum) and put it in, and hit F4 which brought me to Samsung Recovery Solution 5 or something like that, and it has said "please wait" for the past 6 hours I've tried booting Sea Tools by putting the CD drive as my #1 on my BIOS priority boot list, but no luck. When I hit F12, then I get the error:Media test failure, check cableExiting ---Im pretty darn sure its a hard drive problem (Despite the hard drive still being recognized in my BIOS)
View 9 Replies View RelatedWindows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assisstance. Status: 0xc0000034 Info: An unexpected error occured.This computer didnt come with any recovery disc, only some disc that says power2go 6.0. I tryed my brothers recovery disc's, but he has an HP. so i inserted the disc, and it says windows is loading files with a bar going across filling up twice. When it finishes, a blue background design pops up and looks like sunlight is shining down from the top of the screen and the mouse goes to a blue circle rotating clockwise like its loading something, then the computer shuts back down, and reloads the whole proccess again.
it does this several times then finally displays a message that says:Windows Boot Manager Windows has encountered a problem communicating with a device connected to your computer.This error can be caused by unplugging a removable storage device such as an external USB drive while the device iss till in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to recieve this error message, contact the hardware manufacturer. File: BootBCD Status: 0xc00000e9 Info: An unexpected I/O error has occured.
I tryed to reboot my computer, it is a Acer desktop. I used the back up DVDs on the last cd it said failed. gave me statas 0xc000000f and boot failed becouse a recuireddevice is inaccessitle. It also says I need a windows installation disk. It did not come with one.
View 4 Replies View RelatedI am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
A few days ago, I started having trouble with Dell Latitued D800, Windows 7. First, Windows would not boot up. I was able to boot windows using the F12 option. When Windows loaded, the screen display had shrunk and was centered with a black perimeter. I contacted the guy that sold me the computer and he suggested that I check the boot sequence for the boot issue. That worked fine. To resolve the resolution issue, I was advised to select the "last known good configuration" from the F8 options. After I did that, the Windows Error Recovery Screen. A Recent Hardware Or Software Change May Be The Cause. I attempt to start windows normally.
View 7 Replies View RelatedWhen I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives
View 2 Replies View RelatedWhen I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives!Also says The boot selection failed because a required device is inaccessible.
View 1 Replies View RelatedI have had problems booting up my Toshiba laptop. (Windows 7 Ultimate 32 Bit) When i would start my computer, Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert you Windows installation disc and restart your computer.2. Choose your language settings, and then click "Next.3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc000000e Info: An error occured while attempting to read the boot configuration data. tried to solve the problem using repaire methods such as :At the DOS prompt type the following three commands:bootrec.exe /fixmbrbootrec.exe /fixboot (may return an 'Eliment not found' message)bootrec.exe /RebuildBcdI also deleted the BCD parition or it's related to it which is 100Mb in size ,
View 8 Replies View RelatedI left my 160 GB hard disc unused for 1 month.It was installed with Windows 7 ultimate.But now it says unable to start windows. I have another 1 TB hd. i can boot from this and my 160 GB still works as a memory storage. Its only problem is that it is unable to boot.I think if i install a new copy of window it will work.but i need to know why it was happened when 160 GB hard disc was not in used for a long time and any other way to recover it.
View 3 Replies View RelatedI'd had some problem with my laptop the last few days, what I believed to have happened is my laptop (Dell inspiron n5110) which is windows 7, was doing a configuration, but because of my bad connection, my internet dropped. It was stuck at 15% for 3 hours so I turned it off as it was about to run out of battery. It had some problems loading and starting up but they went after a day. but 1 day later I am booting up and I get a black screen.
View 9 Replies View RelatedI have a serious issue, this all started when i tried to update my bios and had some how screw up my os. I tried startup repair failed system restore failed and safe mode failed also. What should i do now?
View 1 Replies View Related
