Failed To Start / Boot Not Even In Safe Mode
Dec 11, 2011
Yesterday I have installed Mirrors edge to my laptop Asus k50ab, I have windows 7 64 bit, after playing the game, I restarted pc, and then it just failed to start and pc restarted, same thing in all safe modes. I think its problem with graphic card update, i have ATI , and probably installed Nvidia update...
Always writes this error: "A problem has been detected and windows has been shut down to prevent damage to your computer."
Technical information:
*** STOP: 0x0000007B (0xFFFFF88009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)"
I tried almost everything, but i think if i will delete that update or something , it will run..
View 9 Replies
ADVERTISEMENT
Jan 24, 2012
Have an Advent laptop here, BSODing when booting with the error message above.Cannot run in safe mode and any start up repair attempts have failed.I have run disk checks both in the Windows start up tool and in Linux and they both say no problems but when I try a system restore it says there is one. Here is the .dmp file and the laptops specs.I also ran sfc /scannow but everytime I do I get a message saying there is a repari waiting for me to restart the laptop and that's all I ever get.[code]
View 9 Replies
View Related
Jun 10, 2011
Loading up the computer and it had frozen at windows start up, so I switched off tried the starting up using safe mode, managed to get onto safe mode and then it froze, so I then tried repair my computer and it failed. So now I'm stuck.
View 14 Replies
View Related
Jul 17, 2012
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies
View Related
Feb 11, 2012
i had an issue with a PC after trying to change the memory on an Windows Vista PC..however the PC was not booting up so i put back the original RAM and when i booted i got the Blue screen of death error. after booting into safe mode and running diagnostics on the PC i rebooted again but still same error. i then when into the BIOS and rebooted in failsafe mode. this then caused the PC to not boot up at all, and the HDD light is not blinking
View 2 Replies
View Related
Jan 23, 2012
Acer AO522 64 GB SSD by Transcend
0x000000F4 (0x0000000000000003 , 0xFFFFFA8003418B30 , 0xFFFFFA8003418E10 , 0xFFFFF80001D9B8B0 ) BSOD ( disk drive related I guess ? )
Like in the topic - BSOD shows up at startup, even in safe mode.
I don't have any minidumps - just the memory dump.
View 3 Replies
View Related
Sep 27, 2012
I had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
View 8 Replies
View Related
Jan 10, 2013
I recently somehow got a nasty virus into my lappy. It was extremely weird since I just bought a new anti-virus (Norton, to be exact) and my PC became super slow. I recognized signs of viruses and I decided to wipe the PC clean. My friend gave two Windows 7 DVDs. However, even after making DVD the first boot order at BIOS it just doesn't work. My DVD rom makes really nasty sounds and it waits on a black screen for a bit and then it shows me to choose safe mode or start normally.
Basically, my PC has always read DVDs (logo on it confirms it). Also, Rom itself isn't broken, other discs like the Norton one work fine. Since the DVDs my friend gave me were DVD R- and DVD RW. Later, I got yet another disc which was DVD R+ but it STILL didn't work. My PC doesn't recognize the DVDs even normally, through My Computer. Did the viruses ruin my drivers or something? My rom always read DVDs but why make weird noises now?
View 2 Replies
View Related
Jun 3, 2012
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies
View Related
Feb 16, 2013
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Oct 28, 2012
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies
View Related
Feb 18, 2013
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
View 4 Replies
View Related
Oct 9, 2011
So i just purchased a new computer to run World of Warcraft xDThis morning my computer wasnt working as intended. I booted it up and it went through the usual stuff, the winds logo popped up, then suddenly the screen went black and i got the message "out of range" on my monitor.I restarted the computer and the same happened again, after the windows logo, the screen goes blank.I then ran it in safe mode + networking and everything was fine !I tried "repair my computer" on the start up menu, but the PC still wouldnt run in normal mode.I tried configuring my PC to an earlier point in time, but the PC still wouldnt run in normal mode .I tried uninstalling my drivers (within safe mode) and it still wouldnt boot up in normal mode.
Could it be the monitor resolution? if so whyyyyy? it's been working fine for two weeks.Also yesterday we had about 5 random power cuts? could this have caused the problem?Everything works fine in safe mode so i think it's not a hardware problem, but normal mode just gets me to the windows logo loading screen then the monitor goes black
View 3 Replies
View Related
Jun 17, 2012
Loading files hangs up on atipci64.says
I am having so much trouble getting my system back to working
View 2 Replies
View Related
Aug 1, 2012
i switched on my laptop today i could only start in safe mode i since read a few threads on here leading me to create a recovery disc but it wouldnt let me do that eitheri kept getting error message : unspecified error (0x80004005)i did the CMD prompt - then - net user administrator /active:yeslogged back in on administrator account but still got same error messagenow im really lost,[CODE]
View 9 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Feb 18, 2012
My computer will only start in safe mode. When booting normally, the computer freezes at login.
View 11 Replies
View Related
Oct 12, 2012
My little brother was away for 3 months and forgot his password. He has no adminastrative password or any other kind of backup. The only way was to restart in Safe Mode and the next option is to click the Start button on the log in page but there is no button. Is there any other way to fix this...
View 1 Replies
View Related
Mar 15, 2011
I can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
View 3 Replies
View Related
Mar 20, 2012
I have a Gateway desktop running windows 7 -64. While the system was powered on with no activity, it shut down and started to re-boot. Now every time I try to start the system it gives the message 'Reboot & select proper boot device or insert boot media and select'. From this screen you can't do anything. I'm not able to start in safe-mode either. I can get F12 to work to get to boot manager.
View 1 Replies
View Related
Jun 8, 2012
Windows 7 Home Premium, Emachines E725 laptop.I just got through dealing with an infection. Details in this thread:[URL] restarted and F8ed my way to Advanced Boot Options and selected Safe Mode with networking. It started up normally, got to the Users page, I selected my profile, typed in my password and the puter suddenly restarted. Huh. So I tried again and typed faster. The puter at first began to start up in safe mode then suddenly restarted. I tried one more time but this time when it got to the Profiles page I left it alone and counted. 12 seconds later it suddenly restarted by itself. So, I can not enter Safe Mode.The infection has been removed and MSE shows that it is clear. Correlation is not causation so I can not say that the Safe Mode problem is related to the infection, and I can not even remember ever starting this particular machine in Safe Mode since I bought it new.
View 14 Replies
View Related
Apr 16, 2012
this might seem like a really dumb question but i've tried pressing f8 repeatedly on asus screen to try and start windows in safe mode but it never works.
View 4 Replies
View Related
Dec 21, 2012
I'm a complete novice at thisMy computer will not start-up normallyOr in safe mode, Failure ID 6CQ708-4RH6B4-XD03HF-60Q003 When I run hard disc testIt stops loading when it gets to Windowssystem 32driversNISx641008030.006SYMEFA64.sys
View 1 Replies
View Related
Nov 7, 2011
Got a nice comp about a year ago off craigslist and havent had a single issue with it until now. I am not your typical "oh-you-mean-I-have-to-plug-it-in-to-work" end user, but neither am I an "expert". Especially in this case I'm in way over my head; a few days ago I went to slave up a buddy's HD. The mistake here was that I had always worked with ATA, not SATA. Yes, I was a temporary idiot, and no, I don't remember WHAT I was thinking. Whatever was or wasn't going through my head, I hooked up the second drive to the second clip on the (belt?). Everything started as usual until the windows loading bar; after the bar, I got a black screen, and then the computer shut itself off.On attempt #2 to startup (and removing the second hard drive), before the loading bar, I get a prompt for "Windows startup repair" or "Start windows normally". Option #1 results in "windows is loading files" for about 10 seconds, then black screen, then computer shuts itself off again. Option #2 just results in windows loading bar, black screen, then computer shuts itself off.
Error Code: 4400:11A
Msg: SCSI_0-000_DISK_GENERIC-_SD/MMC - Target not ready
After running diagnostics specifically towards this, it consistently fails the Confidence Test and consistently passes the Device Self Test (the Read Test and Verify Test options are greyed out).I've defaulted everything in the BIOS (although it says my HD is in a Raid setting, which as I understand it is for synching multiple HDs together, but the only option to change it to is ATA, which I know my HD is not). I have tried bare-bonesing the startup as well, but running only microsoft stuff I still get the same results as above, and I dont know enough to risk turning off anymore startup stuff.
The most confusing part of all is when I broke down and just decided to reformat the drive and start from scratch. Again, I could only boot from the Windows 7 CD in safe mode, and while in there I reformatted the main drive (there are 3 partitions; OEM, Recovery, and the Main). I have done this process multiple times, but the only thing I get even after reformatting the drive is more OS to choose from when starting the comp.As for computer stats I dont remember everything off the top of my head, and can't get past the setup screen now on windows, so I dont know how to check. From the dell website comes this mess: Dell Technical Support Home Page / Dell Troubleshooting Search Other than that what I can remember is:8gig ram, quadcore (cant remember gHZ), 1mb ATI Radeon vid card, Windows 7 Home Premium 64-bit. Sorry if this isn't enough, if anyone knows of a way I can check for further info I'll be happy to oblige.
View 9 Replies
View Related
Jan 26, 2013
Why am I getting blue screen? Loading files, then nothin
View 1 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
Mar 19, 2012
I have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
View 6 Replies
View Related
Jan 21, 2012
I have an HP laptop, and here are the specs I know:
HP G72 Notebook PC
Intel Core i3 2.4 GHz processor
4 GB ram
Windows 7 Home Premium 64-bit OS
Recently I was streaming a TV show off of sidereel.com and firefox froze. I switched to Internet explorer and began to watch again, but the computer began to make a "dinging" noise occasionally. I then ran a norton anti-virus sweep which turned up only a few cookies.After this, I watched lectures from my school's class that I had downloaded, and during this time, the computer froze and became unresponsive. I turned it off manually, and it has not been able to restart in normal mode since then. Every time I try to login, after I put in my password, it goes to a blue screen and says "System_Service_Exception" and then it restarts itself.
Occasionally it doesn't even make it to the windows login, and freezes at the "HP" screen in the beginning of startup.Around the same time that this problem manifested itself, there may have been a new Windows 7 update that my computer was running in the background on its own.I think the problem may be more related to the windows update than to other issues, but I have tried going to a system restore point (coincidentally, the only point available might be a restore point created by the windows update). I have no other restore points available, but I am able to access my computer in safe mode.
View 2 Replies
View Related
Apr 22, 2011
Does anyone know how to start Windows 7 ultimate in safe mode
View 2 Replies
View Related
