I had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs: Processor: AMD FX-8120 Graphics Card: AMD Radeon HD 6850 RAM: 8GB 1866mhz HDD: 500GB
i been getting bsod alot in the past week a few time i got a few with ROQE LESS OR EQUAL something like that but i think i solve that already. now i getting the 0x000000f4 it just appear yesterday when i was watching a movie online snice then no matter if i start it on normal or any safe mode it appear after like 5 second after the restart so i cant get the dump files. the only thing i overclock is the cpu fan thats it.
Dell Inspiron laptop, working fine, shut itself down last night mid work and now will kind of start up but only go so far. am left with Black screen with a blinking cursor in the top left hand corner. Managed to get f8 to work after a while. It runs the pre-boot system assessment build 4116 - everything gets a "pass" except The hard drive which gets a "running". All memory tests "pass" also. After this it will go no further, no more screens. Running windows 7....F2 and F12 will not work either so cannot start in safe!
Yesterday I have installed Mirrors edge to my laptop Asus k50ab, I have windows 7 64 bit, after playing the game, I restarted pc, and then it just failed to start and pc restarted, same thing in all safe modes. I think its problem with graphic card update, i have ATI , and probably installed Nvidia update...
Always writes this error: "A problem has been detected and windows has been shut down to prevent damage to your computer."
I recently somehow got a nasty virus into my lappy. It was extremely weird since I just bought a new anti-virus (Norton, to be exact) and my PC became super slow. I recognized signs of viruses and I decided to wipe the PC clean. My friend gave two Windows 7 DVDs. However, even after making DVD the first boot order at BIOS it just doesn't work. My DVD rom makes really nasty sounds and it waits on a black screen for a bit and then it shows me to choose safe mode or start normally.
Basically, my PC has always read DVDs (logo on it confirms it). Also, Rom itself isn't broken, other discs like the Norton one work fine. Since the DVDs my friend gave me were DVD R- and DVD RW. Later, I got yet another disc which was DVD R+ but it STILL didn't work. My PC doesn't recognize the DVDs even normally, through My Computer. Did the viruses ruin my drivers or something? My rom always read DVDs but why make weird noises now?
i recently tried removing some malaware from a laptop that kept rederecting my webpages. I used Hitman Pro and after scanning with it it asked me to reboot for the changes to take affect. One it rebooted igot the BSOD message. i Cant boot in safe mode so im lost on what option i have left. The main point is that i dont want to preform a clean install, and delete my documents.
My set up is or was dual boot Windows 7 rc712 x64 and vista x64 on 2 partitions on the same drive. Suddenly bsod and looped rebooting with windows 7 and I can't even load windows 7 in safe mode. This ocurred after a video crashed in windows 7. I could not load safe mode but I could load vista x64 reguarly(it was a fresh OS I never used). I did a windows 7 upgrade install over the vista when I meant to reinstall on the windows 7.
I had tried to boot from windows 7 disk and couldn't repair the old windows 7 installation. How do I get back to my original windows 7?
Some other babkground info. Prior to all this but maybe unrelated were dreaded nvlddmkm.sys errors even after fresh installs of windows. This error was under my old 32 bit vista right after I changed video cards and occured after windows loads or windows media player opens. My solution was reinstall windows thus I upgraded to windows 7.
My orginal windows 7 custom install(not upgrade) still had some errors though not as many errors and I could boot into safe mode, shut down, then everything was back to normal until the next error. XFX(my video card manufacturer thinks it is a software driver issue and not hardware).
I'm frankly not that familiar with Windows 7. Also, this isn't a computer that I used, so I'm not familiar with what exactly was happening, if anything, before the situation it's in now.My friend has the following system:Gateway NV7915uIntel Core i3 330M 2.13Ghz500 GB SATA HDD4 GB DDR3 SDRAMWindows 7 Home Premium 64 BitOn Start Windows Normally, it just freezes on "Starting Windows" I have left it like this for days with no progress.On Launch Startup Repair, "Windows is loading files..." OK Then when "Starting Windows" appears, BSOD:DRIVE_IRQL_NOT_LESS_OR_EQUALSTOP: 0x000000D1On Safe Mode, BSOD at classpnp.sys:PAGE_FAULT_IN_NONPAGED_AREASTOP: 0x00000050On Debug Kernel, freezes on "Starting Windows"On Windows Home Premium 64-Bit Recovery Disc (I downloaded this, I did not make it from this system, the owner never did this), Windows Setup [EMS Enabled].... "Windows is loading files..." OK, Progress bar moves a bit and then:STOP: c00021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000The system has been shut down.
If I use a Retail Windows 7 Disc, "Windows is loading files" OK, then "Starting Windows" the logo forms, and boom:STOP: 0x0000008EI took the HDD out of this system and popped it in my tower. I ran a virus scan (as expected, nothing found), ran an Advanced System Care 5 scan/cleanup. Then I ran a Check Disk (Checked - Automatically fix file system errors and Checked Scan for and attempt recovery of bad sectors), finished fine. no issues.All files are accessible and everything seems fine on the HDD when it's a slave in my tower.So at this point, since I cannot boot into any form of Windows or repair or command prompt that I am aware of, what can I do?
So I just got back from a 3 day vacation, and when I came back I rebooted my computer only to come back to the "Start Windows Normally/ launch startup repair" naturally I chose startup repair, it froze. Tried starting normally, took me back to the same page. So I tried booting in safe mode, took me to the BSOD that read Bad_pool_header. So then I tried to putting in my windows 7 installation disc to see if I could do a system recover from there, but as soon as I try boot up with the disc it takes me back to the same BSOD. I feel completely stuck as I've tried everything I can think of.
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
So i just purchased a new computer to run World of Warcraft xDThis morning my computer wasnt working as intended. I booted it up and it went through the usual stuff, the winds logo popped up, then suddenly the screen went black and i got the message "out of range" on my monitor.I restarted the computer and the same happened again, after the windows logo, the screen goes blank.I then ran it in safe mode + networking and everything was fine !I tried "repair my computer" on the start up menu, but the PC still wouldnt run in normal mode.I tried configuring my PC to an earlier point in time, but the PC still wouldnt run in normal mode .I tried uninstalling my drivers (within safe mode) and it still wouldnt boot up in normal mode.
Could it be the monitor resolution? if so whyyyyy? it's been working fine for two weeks.Also yesterday we had about 5 random power cuts? could this have caused the problem?Everything works fine in safe mode so i think it's not a hardware problem, but normal mode just gets me to the windows logo loading screen then the monitor goes black
i switched on my laptop today i could only start in safe mode i since read a few threads on here leading me to create a recovery disc but it wouldnt let me do that eitheri kept getting error message : unspecified error (0x80004005)i did the CMD prompt - then - net user administrator /active:yeslogged back in on administrator account but still got same error messagenow im really lost,[CODE]
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
My little brother was away for 3 months and forgot his password. He has no adminastrative password or any other kind of backup. The only way was to restart in Safe Mode and the next option is to click the Start button on the log in page but there is no button. Is there any other way to fix this...
I can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
I have a Gateway desktop running windows 7 -64. While the system was powered on with no activity, it shut down and started to re-boot. Now every time I try to start the system it gives the message 'Reboot & select proper boot device or insert boot media and select'. From this screen you can't do anything. I'm not able to start in safe-mode either. I can get F12 to work to get to boot manager.
Windows 7 Home Premium, Emachines E725 laptop.I just got through dealing with an infection. Details in this thread:[URL] restarted and F8ed my way to Advanced Boot Options and selected Safe Mode with networking. It started up normally, got to the Users page, I selected my profile, typed in my password and the puter suddenly restarted. Huh. So I tried again and typed faster. The puter at first began to start up in safe mode then suddenly restarted. I tried one more time but this time when it got to the Profiles page I left it alone and counted. 12 seconds later it suddenly restarted by itself. So, I can not enter Safe Mode.The infection has been removed and MSE shows that it is clear. Correlation is not causation so I can not say that the Safe Mode problem is related to the infection, and I can not even remember ever starting this particular machine in Safe Mode since I bought it new.
this might seem like a really dumb question but i've tried pressing f8 repeatedly on asus screen to try and start windows in safe mode but it never works.
I'm a complete novice at thisMy computer will not start-up normallyOr in safe mode, Failure ID 6CQ708-4RH6B4-XD03HF-60Q003 When I run hard disc testIt stops loading when it gets to Windowssystem 32driversNISx641008030.006SYMEFA64.sys