I'm frankly not that familiar with Windows 7. Also, this isn't a computer that I used, so I'm not familiar with what exactly was happening, if anything, before the situation it's in now.My friend has the following system:Gateway NV7915uIntel Core i3 330M 2.13Ghz500 GB SATA HDD4 GB DDR3 SDRAMWindows 7 Home Premium 64 BitOn Start Windows Normally, it just freezes on "Starting Windows" I have left it like this for days with no progress.On Launch Startup Repair, "Windows is loading files..." OK Then when "Starting Windows" appears, BSOD:DRIVE_IRQL_NOT_LESS_OR_EQUALSTOP: 0x000000D1On Safe Mode, BSOD at classpnp.sys:PAGE_FAULT_IN_NONPAGED_AREASTOP: 0x00000050On Debug Kernel, freezes on "Starting Windows"On Windows Home Premium 64-Bit Recovery Disc (I downloaded this, I did not make it from this system, the owner never did this), Windows Setup [EMS Enabled].... "Windows is loading files..." OK, Progress bar moves a bit and then:STOP: c00021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000The system has been shut down.
If I use a Retail Windows 7 Disc, "Windows is loading files" OK, then "Starting Windows" the logo forms, and boom:STOP: 0x0000008EI took the HDD out of this system and popped it in my tower. I ran a virus scan (as expected, nothing found), ran an Advanced System Care 5 scan/cleanup. Then I ran a Check Disk (Checked - Automatically fix file system errors and Checked Scan for and attempt recovery of bad sectors), finished fine. no issues.All files are accessible and everything seems fine on the HDD when it's a slave in my tower.So at this point, since I cannot boot into any form of Windows or repair or command prompt that I am aware of, what can I do?
I have a 2 year old vaio that has i5 and 8 gb of ram. I have windows 7 professional x64. My computer froze while on the Internet, and when I manually shut it down and restarted it, it gave me two options. Start repair console, and start normally. When I started it normally, it froze on the windows logo. I restarted it, and tried recovery console, but it loads, then gives me an arrow with a background of blue and a bird on the right, which is windows 7's background when logging in. But it only shows this.I have tried safe mode, but that freezes on classpnp.sys and I have tried to boot from windows 7 recovery disk. I have also tried windows vista recovery disk. When the windows 7 disk booted, it loads and then asks for my country, but then again shows just a cursor.Blue screen of death error is unmountable boot volume.
i recently tried removing some malaware from a laptop that kept rederecting my webpages. I used Hitman Pro and after scanning with it it asked me to reboot for the changes to take affect. One it rebooted igot the BSOD message. i Cant boot in safe mode so im lost on what option i have left. The main point is that i dont want to preform a clean install, and delete my documents.
My set up is or was dual boot Windows 7 rc712 x64 and vista x64 on 2 partitions on the same drive. Suddenly bsod and looped rebooting with windows 7 and I can't even load windows 7 in safe mode. This ocurred after a video crashed in windows 7. I could not load safe mode but I could load vista x64 reguarly(it was a fresh OS I never used). I did a windows 7 upgrade install over the vista when I meant to reinstall on the windows 7.
I had tried to boot from windows 7 disk and couldn't repair the old windows 7 installation. How do I get back to my original windows 7?
Some other babkground info. Prior to all this but maybe unrelated were dreaded nvlddmkm.sys errors even after fresh installs of windows. This error was under my old 32 bit vista right after I changed video cards and occured after windows loads or windows media player opens. My solution was reinstall windows thus I upgraded to windows 7.
My orginal windows 7 custom install(not upgrade) still had some errors though not as many errors and I could boot into safe mode, shut down, then everything was back to normal until the next error. XFX(my video card manufacturer thinks it is a software driver issue and not hardware).
I had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs: Processor: AMD FX-8120 Graphics Card: AMD Radeon HD 6850 RAM: 8GB 1866mhz HDD: 500GB
So I just got back from a 3 day vacation, and when I came back I rebooted my computer only to come back to the "Start Windows Normally/ launch startup repair" naturally I chose startup repair, it froze. Tried starting normally, took me back to the same page. So I tried booting in safe mode, took me to the BSOD that read Bad_pool_header. So then I tried to putting in my windows 7 installation disc to see if I could do a system recover from there, but as soon as I try boot up with the disc it takes me back to the same BSOD. I feel completely stuck as I've tried everything I can think of.
This morning I woke up and the first thing I always do is switch on my PC to check email and to have a quick chat with my friend who lives In Australia before it get's late over there. My PC was on, running S.T.A.L.K.E.R: Call of Pripyat via steam at the time, whilst still talking to my friend in Australia. Whilst typing to him, my system locked up mid sentence. I left it for 15 minutes, got Coffee to wake up, still froze.. I had no choice to manually switch it off via the Power Button on the Tower. When I switch the tower back on, I had no Display on the screen. Now, this isn't actually the problem, I've fixed this kind of issue on a friends PC before and knew straight away my Memory Modules had just died. I removed the RAM, switched on, waited for the long Beep to confirm my Mobo was still breathing.. Placed one Module back in, black screen, tried the other etc etc.. Simple fix, get my spare RAM that I saved from an older build, stuck them in, powered up.
At this point I had to fix a corrupt winload.exe (Or similar) likely due to me having to turn the power off manually.. I hit the Recovery Console, let Window's do it stuff, corrupt file repaired, hello desktop..Just to confirm it wasn't a one-off, I Shutdown the system and powered it back on, still successfully reaching Desktop with no issues.Now this is where it gets weird.. I have a room I keep PC spares as well as my Anti-Static mats and junk. I took my PC to this room in order to change my RAM. After I got the PC working.. All I did was put the side panel back on, take my PC back to my desk in my Lounge where it always is and somehow, some way, in the time it took me to move the PC, despite having no power, Windows managed to Corrupt itself... Eh?
To clarify, I fixed my original issue by swapping out the dead RAM, Fixed a Corrupt File and then successfully booted to desktop. I had fixed the problem, but when I moved my PC back to where it lives, it no longer works. I get to "Windows is Starting" and it freezes.(On a side note: The PC was not knocked on the journey from one room to the next and yes I did double check to see if a cable had came loose. I have not added any additional peripherals, the PC is set up in the exact same way it was when I performed the original RAM Swap)
In an attempt to fix this I have so far, from the (F8) Advanced Options. Repair your Computer All I get is the usual black screen with "Windows is loading files..." with the white progress bar. The Progress Bar reaches full, but then nothing happens. It stays on the same screen and never progresses. I gave the process 15 minutes and still nothing..
Launch Startup Repair (Recommended) Exactly the same as above. Safe Mode Gets stuck at ../disk.sys Safe Mode with Networking
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
I cannot start my windows 7 in safe more or use recovery function. Problem happened after windows 7 update, then after restart windows defender asked me to restart again, and then blue screen or auto restart forever. I would like to disable or uninstall windows defender as i can access the command prompt but I can't find how to do? How to uninstall windows latest update with command prompt?
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
Earlier today I wanted to get into Safe Mode in order to cleanup up leftover files from an uninstall of Catalyst.I have a hard time getting into safe mode via my BIOS so I generally use msconfig. I always set it to run straight into Safe Mode (which is what I did today). When I restarted I got the 01E BSOD. I'm assuming it is another driver or that my system files are corrupted.I checked my hardware and individually ruled that out.Now I am in a situation where I cannot boot into the regular OS to try and figure out what is really going on (gather the dump files etc..). I have been trying to access msconfig via the command line from my DVD but can't figure out how to get the right permissions and actually run it to turn off the safe mode boot option. I use a RAID 0 startup so I have to load the RAID drivers when I pop in the DVD. Then I have to switch drives from the command prompt from "X" to whatever the RAID drive shows up as.
my computer was running fine then yesterday i suddenly got shut down and anytime i turned it back on i would get a BSOD after a few seconds unless i went to safe mode its a page_fault_in_nonpaged_area 0x00000050.the only thing different is i downloaded borderlands from steam, played for about 8 hours, then got the packs running, then 10 mins later it shut itself down on its own currently system restore only had 2 options for 8am when i downloaded borderlands, 1 said critical system update adn the other was direct x 9 im not good with computer hardware so if u need any more info tell me, but heres some system stuff System Info Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
I bought the bleeping Dell Inspiron 560, was to rapidly tap F8 during startup to bring up the "Advanced Boot Options." I saw the guy at Best Buy do it but it did not work on my machine when I got home. I'm using Windows 7 Home Premium. The computer came without a manual or any disks.
I have a laptop with broken lcd. So im using it now as desktop, connecting it to an external lcd monitor.Last night I suspected a worm and tried to boot up in safe mode by pressing F8 but couldn't make it work because windows only activate the external monitor by the time it has finished loading drivers. The result was it keeps booting into normal mode.So, I remembered there's another way to boot into safe mode by accessing boot options in msconfig...Now I'm stuck with safemode and cannot do anything because safemode doesnt enable external monitor. I know for sure that I could enter password and get into safemode but I can't tell what should I press or click to access to that msconfig windows again to return boot options to normal state.
So last night I updated my computer (which I don't often do). Then today I go to play a game and I bsod. Try again, same thing. I boot in safe mode. Bsod again. I boot in safe mode once again and revert to a restore point from three days ago. I go to play the game again, bsod. There's only the most recent bsod saved from all of it, which I've uploaded here: [URL]. I didn't write down the information to "find solutions" for, unfortunately, suffice to say that the error given was just BlueScreen.
The updates I installed were: KB2588516 KB2617657 KB2620704 KB2641690 KB890830 As well as a small handful of office 2010 updates.
I have been having nonfrequent bsod errors for quite a while, and since playing a game of Starcraft 2 today (~3 hours ago) my computer started to constantly bsod. I can not log into windows for more than a minute or two (if that) before it BSOD's again. I am currently posting with my laptop, and the desktop that is BSOD'ing is dualbooting linux (ubuntu) which has no BSOD issues whatsoever. I also ran the memtest that comes with installing ubuntu and no issues were found. Attached are my minidumps.
[code] I couldn't do a health report due to being stuck with safe mode with networking. The BSOD started about two months ago while the gf was using it and didn't happen for me till yesterday. As of now I can get it to start normally but It crashes any time I open anything. I tried swapping ram and no change. I honestly don't know a whole lot about windows 7.
i been getting bsod alot in the past week a few time i got a few with ROQE LESS OR EQUAL something like that but i think i solve that already. now i getting the 0x000000f4 it just appear yesterday when i was watching a movie online snice then no matter if i start it on normal or any safe mode it appear after like 5 second after the restart so i cant get the dump files. the only thing i overclock is the cpu fan thats it.
I have a Compaq persario CQ62 laptop i was on facebook about a week ago and signed out and my computer froze i powered it down and when i turned it on i thought it was going to start and then it went to a blue screen. I am doing this from another computer because i cant get that one to boot from anything disk or drive. I can not access safe mode or repair mode If i try to load safe mode it does not even show me the file its loading.
I can only run Windows 7 Home Premium (different computer than the one I'm posting from) in safe mode. When I try to use the Diagnostic Tool, it says that it is saving the files but then it doesn't finish up with giving me the folder on my desktop. How I can get the files to show so that I can attach them to this thread?
However after about a week of usage with no errors all of a sudden I have started getting the odd BSOD, and today I have had about 20, even in safe mode.
Last thing I did on my laptop was download baseball team logos a couple days previous to problems.. Use mobile hotspot for internet and this is not working in SafeMode. These are the lap top specs, and can provide more if needed: [CODE]
Dell Inspiron laptop, working fine, shut itself down last night mid work and now will kind of start up but only go so far. am left with Black screen with a blinking cursor in the top left hand corner. Managed to get f8 to work after a while. It runs the pre-boot system assessment build 4116 - everything gets a "pass" except The hard drive which gets a "running". All memory tests "pass" also. After this it will go no further, no more screens. Running windows 7....F2 and F12 will not work either so cannot start in safe!
I have Windows 7 Home Premium in a laptop. How do start it in Safe Mode? I have malfunctioning antivirus program that won't uninstall nor shutdown, and I'd like to try fixing it with Safe Mode.
