Uncountable Boot Volume, No Safe Mode, No Recovery Console?
Jan 22, 2012
I have a 2 year old vaio that has i5 and 8 gb of ram. I have windows 7 professional x64. My computer froze while on the Internet, and when I manually shut it down and restarted it, it gave me two options. Start repair console, and start normally. When I started it normally, it froze on the windows logo. I restarted it, and tried recovery console, but it loads, then gives me an arrow with a background of blue and a bird on the right, which is windows 7's background when logging in. But it only shows this.I have tried safe mode, but that freezes on classpnp.sys and I have tried to boot from windows 7 recovery disk. I have also tried windows vista recovery disk. When the windows 7 disk booted, it loads and then asks for my country, but then again shows just a cursor.Blue screen of death error is unmountable boot volume.
View 4 Replies
ADVERTISEMENT
Mar 9, 2012
I'm frankly not that familiar with Windows 7. Also, this isn't a computer that I used, so I'm not familiar with what exactly was happening, if anything, before the situation it's in now.My friend has the following system:Gateway NV7915uIntel Core i3 330M 2.13Ghz500 GB SATA HDD4 GB DDR3 SDRAMWindows 7 Home Premium 64 BitOn Start Windows Normally, it just freezes on "Starting Windows" I have left it like this for days with no progress.On Launch Startup Repair, "Windows is loading files..." OK Then when "Starting Windows" appears, BSOD:DRIVE_IRQL_NOT_LESS_OR_EQUALSTOP: 0x000000D1On Safe Mode, BSOD at classpnp.sys:PAGE_FAULT_IN_NONPAGED_AREASTOP: 0x00000050On Debug Kernel, freezes on "Starting Windows"On Windows Home Premium 64-Bit Recovery Disc (I downloaded this, I did not make it from this system, the owner never did this), Windows Setup [EMS Enabled].... "Windows is loading files..." OK, Progress bar moves a bit and then:STOP: c00021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000The system has been shut down.
If I use a Retail Windows 7 Disc, "Windows is loading files" OK, then "Starting Windows" the logo forms, and boom:STOP: 0x0000008EI took the HDD out of this system and popped it in my tower. I ran a virus scan (as expected, nothing found), ran an Advanced System Care 5 scan/cleanup. Then I ran a Check Disk (Checked - Automatically fix file system errors and Checked Scan for and attempt recovery of bad sectors), finished fine. no issues.All files are accessible and everything seems fine on the HDD when it's a slave in my tower.So at this point, since I cannot boot into any form of Windows or repair or command prompt that I am aware of, what can I do?
View 2 Replies
View Related
Nov 19, 2011
It seems to me that XP's recovery console is somewhat better than the one that comes with Vista or 7, unless someone can point me in the right direction for finding further documentation on this topic.
The main difference is the lack of ability to tinker with services (LISTSVC / ENABLE / DISABLE commands). A missed opportunity is the lack of registry tweaking, considering that REGEDIT can be run, but I think it only allows you to look at the registry for the recovery console rather than the main Windows installation, which doesn't help much (though I haven't tried to import/mount the registry file from the main Windows installation).
View 1 Replies
View Related
May 15, 2011
This morning I woke up and the first thing I always do is switch on my PC to check email and to have a quick chat with my friend who lives In Australia before it get's late over there. My PC was on, running S.T.A.L.K.E.R: Call of Pripyat via steam at the time, whilst still talking to my friend in Australia. Whilst typing to him, my system locked up mid sentence. I left it for 15 minutes, got Coffee to wake up, still froze.. I had no choice to manually switch it off via the Power Button on the Tower. When I switch the tower back on, I had no Display on the screen. Now, this isn't actually the problem, I've fixed this kind of issue on a friends PC before and knew straight away my Memory Modules had just died. I removed the RAM, switched on, waited for the long Beep to confirm my Mobo was still breathing.. Placed one Module back in, black screen, tried the other etc etc.. Simple fix, get my spare RAM that I saved from an older build, stuck them in, powered up.
At this point I had to fix a corrupt winload.exe (Or similar) likely due to me having to turn the power off manually.. I hit the Recovery Console, let Window's do it stuff, corrupt file repaired, hello desktop..Just to confirm it wasn't a one-off, I Shutdown the system and powered it back on, still successfully reaching Desktop with no issues.Now this is where it gets weird.. I have a room I keep PC spares as well as my Anti-Static mats and junk. I took my PC to this room in order to change my RAM. After I got the PC working.. All I did was put the side panel back on, take my PC back to my desk in my Lounge where it always is and somehow, some way, in the time it took me to move the PC, despite having no power, Windows managed to Corrupt itself... Eh?
To clarify, I fixed my original issue by swapping out the dead RAM, Fixed a Corrupt File and then successfully booted to desktop. I had fixed the problem, but when I moved my PC back to where it lives, it no longer works. I get to "Windows is Starting" and it freezes.(On a side note: The PC was not knocked on the journey from one room to the next and yes I did double check to see if a cable had came loose. I have not added any additional peripherals, the PC is set up in the exact same way it was when I performed the original RAM Swap)
In an attempt to fix this I have so far, from the (F8) Advanced Options. Repair your Computer All I get is the usual black screen with "Windows is loading files..." with the white progress bar. The Progress Bar reaches full, but then nothing happens. It stays on the same screen and never progresses. I gave the process 15 minutes and still nothing..
Launch Startup Repair (Recommended)
Exactly the same as above.
Safe Mode
Gets stuck at ../disk.sys
Safe Mode with Networking
[code]....
View 1 Replies
View Related
Jun 3, 2012
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies
View Related
Feb 7, 2011
I tried booting into safe mode to scan for malware and viruses but I cannot go into safe mode just by tapping f8 right before windows starts. I have tried many times but to no avail. I think it is broken because the only way I can go into safe mode is via msconfig, but I would like to avoid that. Also, the volume does not go down, only up, and I have tried using both the function keys and the main volume control. It will go down but it goes up again by itself.
View 4 Replies
View Related
Apr 15, 2011
I cannot start my windows 7 in safe more or use recovery function. Problem happened after windows 7 update, then after restart windows defender asked me to restart again, and then blue screen or auto restart forever. I would like to disable or uninstall windows defender as i can access the command prompt but I can't find how to do? How to uninstall windows latest update with command prompt?
View 2 Replies
View Related
Dec 16, 2011
i have purchase laptop in which all ready sound blaster &creative console volume launcher are installed but volume launcher i have uninstalled by mistake can i installed again. my system detail dell studio 1558.service tag 7d776bs.
View 1 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Nov 28, 2012
i am using factory installed Windows 7 over hp laptop its working perfectly even recovery from f11 and hp recovery manager system recovery option also working means easily to restore i was create recovery usb from recovery manager when i try to boot usb for recovery after loading start error show Unmountable Boot Volume blue screen appears
View 1 Replies
View Related
Sep 14, 2012
So it all started last night. My computer was unresponsive, and after clicking "shut down" a few times to no avail, I decided to do a hard reset. I didn't think anything would happen, but afterwards it just wouldn't boot back up. It goes to the windows logo and stays there. I don't get any errors, it just hangs there. I have tried many things, so far nothing has worked.
I have tried booting into safe mode. This does not work, it gets stuck at classpnp.sys and stays there. I have tried booting from the windows 7 disc. This does not work, after it loads the disc it will hang at a black screen. I have tried switching from IDE to AHCI. This has worked, but not fixed the problem. When booting into safe mode it will crash instead of hanging.
When booting from the windows 7 disc I can almost reinstall windows, however I get the error "Windows could not format a partition on disk 1. The error occurred while preparing the partition selected for installation. Error code 0x80070057." When attempting to restore windows to a restore point I get the error "The system image restore failed. Error details: Windows backup failed to read from the recovery volume. (0x8078002F)"
I have tried connecting the SSD to a different windows 7 computer in a attempt to reformat it, however just plugging it in would give the same problem to that computer. So, is my SSD toast? Did I mess it up beyond repair? Now system repair will not hang on IDE, but still gives me the same errors. Also, now it says missing operating system. Not sure how that happened.
View 6 Replies
View Related
Oct 10, 2011
I bought the bleeping Dell Inspiron 560, was to rapidly tap F8 during startup to bring up the "Advanced Boot Options." I saw the guy at Best Buy do it but it did not work on my machine when I got home. I'm using Windows 7 Home Premium. The computer came without a manual or any disks.
View 4 Replies
View Related
Dec 24, 2012
I have a laptop with broken lcd. So im using it now as desktop, connecting it to an external lcd monitor.Last night I suspected a worm and tried to boot up in safe mode by pressing F8 but couldn't make it work because windows only activate the external monitor by the time it has finished loading drivers. The result was it keeps booting into normal mode.So, I remembered there's another way to boot into safe mode by accessing boot options in msconfig...Now I'm stuck with safemode and cannot do anything because safemode doesnt enable external monitor. I know for sure that I could enter password and get into safemode but I can't tell what should I press or click to access to that msconfig windows again to return boot options to normal state.
View 5 Replies
View Related
Mar 26, 2009
I've installed Windows 7 Build 7057 on a partition where I previously had Windows XP. I wanted this installation to wipe out the XP, but instead it created a Windows.old folder. I've deleted that folder, but now when the system starts up a black screen with three options shows up:
1. Previous Windows
2. Windows 7
3. Windows Recovery Console
This Recovery Console was installed when I had the XP, I have no idea why it's still there.
I would like to remove any traces of XP and this console so that the system can boot 7 right away.
Also, a tiny thing: for like 2 seconds a black screen with all drives attached shows up, I'd like to remove that one, too.
Could you tell me how to do it?
View 2 Replies
View Related
Nov 22, 2009
How to boot in Safe Mode in XP Mode?
View 6 Replies
View Related
Oct 2, 2011
I need to change a registry setting so i can use my raid drive,which is isastorV or wahtever, to 3 but once im done editting the registry under recovery console in windows 7. (from a repair disk)i noitce, that when i return to recovery console after a reboot, the setting has reverted back to 0 from its change of 3.In other words.Regedit is not saving any changes i make to it (the registry) under recovery console).
View 3 Replies
View Related
Mar 9, 2012
I have Windows 7 Home Premium in a laptop. How do start it in Safe Mode? I have malfunctioning antivirus program that won't uninstall nor shutdown, and I'd like to try fixing it with Safe Mode.
View 5 Replies
View Related
Aug 8, 2011
So the other day I boot up my computer and try to login under my user account. I get a "The user profile failed the logon. The user profile cannot be loaded" error message. After looking inline i find out how to fix this. The problem is I can't seem to boot into safe mode. It's an Asus motherboard P8H67-M series. I've tried hitting F8 and F5 (as was suggested with Asus boards), but neither of them work. I login under another use and type msconfig form the start menu to try and manually set the computer to boot into safe mode. I get asked for the admin password (my user account is the admin account), so I type is the password and I get a "windows cannot find C:windowssystem32msconfig.exe" error message.
View 1 Replies
View Related
Jan 26, 2013
Cannot Boot up in anything but Safe Mode on an Acer Aspire X1430.
View 14 Replies
View Related
Jul 3, 2012
Toshiba laptop hangs at pick user screen when booting normally. Tried creating new user acct, same result. Boots up in safe mode. Re-seated memory sticks, hard drive, no change. Tried updating drivers too. AV scan finds nothing.
View 5 Replies
View Related
Jan 2, 2011
The driver is mismanaging system PTES, and another one I think. So I could not boot into Safe Mode or Normal Mode. Eventually I got through and I cleaned out the registry and had it reinstall video drivers as well. Now all seems to work fine, except that the taskbar refuses to keep Use Small Icons checked, and when I click on Pin this program to taskbar with any random shortcut it does nothing at all.Both these things worked fine before the BSOD spam I had. It's an HP Workstation xw3100 running on the default VGA (video card died, getting a new one) with 2GB of DDR400 RAM (1GB factory RAM from HP) a SATA DVD/RW Drive and a Seagate 80GB 7200RPM HDD, everything else is as it was from the factory.
View 1 Replies
View Related
Nov 19, 2012
cannot boot into safe mode for windows 7. Booting normally works fine, and I notice no problems with it. When I try to boot into safe mode (or safe mode with networking..etc.), it doesn't work. It goes through lists of loading drivers for a bit, then the light blue windows login page background comes up, and it says configuring computer.Then the computer reboots. I don't need it for anything vital right now, but I sure don't want to try and fix it in the moment when I do need it.
View 3 Replies
View Related
Nov 23, 2009
I am turning on my computer, pressing F8, the boot menu appears (Safe mode window), I choose "Safe mode" and click enter.
The display shows that it is "Loading windows files", then it stucks on a black screen.
I tried it many times but it's the same. I was waiting even 30 minutes but nothing helped.
Anyone knows what could be the problem?
Is the System recovery. startup repair Tool could help me in this case?
View 2 Replies
View Related
Aug 5, 2012
My issue is that my PC reboots immediately every time I log in. I try to boot into safe mode using f8. When the option to use safe mode comes up my keyboard its unresponsive. The keyboard is wired and works fine in the bios settings screen. So I cannot boot into safe mode using f8 and it reboots immediately after I log in so I cannot us msconfig.
View 5 Replies
View Related
Jan 23, 2012
My computer is constantly rebooting in the Recovery Console. I chose this option because I was trying to restart in safe mode, but I didnt see that option, so it was basically a mistake. But now that I have done that, I can not get it to boot back up normally. Also, when I try to use option 1 in Recovery, I put my password in and it says its incorrect
View 7 Replies
View Related
Apr 11, 2012
When I turn on my Acer laptop normally it loads but then completely freezes, not letting me do anything. The only way I can use it is through safe mode. It was working fine before it suddenly broke and it is only a few months old. I thought it might be a virus? I do have up to date anti virus thoug
View 9 Replies
View Related
Aug 7, 2012
my Sony VAIO VGC-LA3 seems to have a problem. I recently did a clean install of windows 7, which was no problem and completely drama free. I then sourced all the relevant drivers and installed a few essential programs and updates to get the machine up and running. I was then prompted into doing a restart so the updates could be installed. Upon restart the machine came on, start up options flashed up as normal and proceeded to the windows loading screen. The screen then goes black and shows no sign of coming back on until I bet the 'blue screen of death' 5 minutes later. The HDD and WIFI light do flash during these 5 mins. Then the computer restarts after the BSOD and says that Windows wasn�t shut down correctly etc� I chose to start normally and the same thing happens again. I then chose to start in Safe Mode With Networking and the machine would go through the start up procedure as expected, loading the OS with only basic drivers. I have tried wiping the hard drive and doing another installation of 7, with no success, and have also tried Vista, with the same result.
View 7 Replies
View Related
Aug 10, 2012
getting BSOD after boot and desktop comes up. i can get in safe mode without BSOD coming up. Attached SF Diagnost. from my Dell Laptop.
View 3 Replies
View Related
Nov 9, 2012
i recently tried removing some malaware from a laptop that kept rederecting my webpages. I used Hitman Pro and after scanning with it it asked me to reboot for the changes to take affect. One it rebooted igot the BSOD message. i Cant boot in safe mode so im lost on what option i have left. The main point is that i dont want to preform a clean install, and delete my documents.
View 3 Replies
View Related
Jun 22, 2009
I have just installed win 7 and got the dual boot with windows Xp, which I already had. now I want to do safe mode of windows Xp tapping the F8 during the boot, but nothing happens....no safe mode at all. What happened ???
I cannot rich the safe mode even in win 7. I don`t know why ???
View 3 Replies
View Related
