i have purchase laptop in which all ready sound blaster &creative console volume launcher are installed but volume launcher i have uninstalled by mistake can i installed again. my system detail dell studio 1558.service tag 7d776bs.
View 1 RepliesI have a 2 year old vaio that has i5 and 8 gb of ram. I have windows 7 professional x64. My computer froze while on the Internet, and when I manually shut it down and restarted it, it gave me two options. Start repair console, and start normally. When I started it normally, it froze on the windows logo. I restarted it, and tried recovery console, but it loads, then gives me an arrow with a background of blue and a bird on the right, which is windows 7's background when logging in. But it only shows this.I have tried safe mode, but that freezes on classpnp.sys and I have tried to boot from windows 7 recovery disk. I have also tried windows vista recovery disk. When the windows 7 disk booted, it loads and then asks for my country, but then again shows just a cursor.Blue screen of death error is unmountable boot volume.
View 4 Replies View RelatedIt seems to me that XP's recovery console is somewhat better than the one that comes with Vista or 7, unless someone can point me in the right direction for finding further documentation on this topic.
The main difference is the lack of ability to tinker with services (LISTSVC / ENABLE / DISABLE commands). A missed opportunity is the lack of registry tweaking, considering that REGEDIT can be run, but I think it only allows you to look at the registry for the recovery console rather than the main Windows installation, which doesn't help much (though I haven't tried to import/mount the registry file from the main Windows installation).
I have windows 7 ultimate 64 bit version. There is only one program that I cannot install because I get an error message. The error "32-bit setup launcher has stopped working". How do I get around that?
View 11 Replies View RelatedI recently bought a new PC and am running Windows 7 64 bit. I'm trying to install some older games (Might and Magic 6 7 and 8 to be exact) and every time I try to run the setup it acts like it's loading then nothing pops up. If I wait 5-10 mins a setup bar will pop up but immediately stops responding. The exact error is "32 bit setup launcher has stopped responding"...so I'm assuming this has something to do with my 64 bit Windows.
View 1 Replies View RelatedFirst of all. I was playing gmod successfully yesterday, today i downloaded some things into my gmod, i tried to play it.and it Gave me this: Failed to load launcher DLL, my brother gave me advice and he said: ''You should delete all the files and reinstall gmod on steam'' I tried, but.. it still gave me the same error, no diffrences.And yes, i am a girl, i know girls can be professional technics but im not the master of that so dont ask me to do
View 1 Replies View RelatedAuto Sync Launcher dialog box appears when the computer boots up. I heard that re-installing service pack 1 should fix the problem, however, I tried this and it still appears. What should I do next to solve this problem? I even tried system restore but that was ineffective.
View 2 Replies View RelatedI am trying to uninstall a program called PCStitch. I get the error message "installscript setup launcher has stopped working". The program closes and I can go no further. I have notified the PCStitch techs and they have never heard of the program doing it and seem to have no answer how to fix it. I get the same message when I try to download the latest version of PCStitch.
View 1 Replies View Relatedcan't find java virtual machine launcher
View 1 Replies View RelatedI bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?
Note: My Headphone does not have any soft of driver or software
How to Create Custom Jump Lists in Windows 7 ?
View 0 Replies View Relatedcould not find the main classluraRunner.program will exit. this error msg is every 30 secs to display on my computer.
View 1 Replies View RelatedWhat is the optimal set-up?
High volume on speakers and low in windows, or low on speakers and highest in windows?
I rebooted my computer today and now every time I try and bring it up it goes in to the recovery console and doesn't show that I have an operating system loaded. I have tried everything from safe mode, to last known good config, vga mode, tried repairing errors, and nothing works. I tried System Restore from the Recovery Console options but it kept reading that I must "Select an operating system in order to continue". Obviously, I can't select one if it isn't there to do so. I think my hard drive is going bad from a diagnostic test, so I need to get it booted up just long enough to create a backup so I don't lose years worth of work.
View 2 Replies View Relatedso i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies View RelatedI am hosting a minecraft server, and am trying to use a windows scheduled task to start a .bat file that calls on java and shows input on the cmd.exe console. When I manually start the .bat file the console shows, but when I start it with the windows scheduler its hidden. When I start the run.bat with a scheduled task on computer start up. The server will start and function correctly, but I don't know how to open the cmd console to type things in.
View 1 Replies View RelatedI just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.
First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.
A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.
View 2 Replies View RelatedI like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?
View 9 Replies View Related[email]amtemirak@hotmail.comSpoiler :[spoiler]
View 1 Replies View Relatedi have Windows 7 x64 when i running quake 4 and opening console and typing it shows only square block not words an the fps counter in the right corner only show 1 block not numbers whats wrong?
View 4 Replies View RelatedI've installed Windows 7 Build 7057 on a partition where I previously had Windows XP. I wanted this installation to wipe out the XP, but instead it created a Windows.old folder. I've deleted that folder, but now when the system starts up a black screen with three options shows up:
1. Previous Windows
2. Windows 7
3. Windows Recovery Console
This Recovery Console was installed when I had the XP, I have no idea why it's still there.
I would like to remove any traces of XP and this console so that the system can boot 7 right away.
Also, a tiny thing: for like 2 seconds a black screen with all drives attached shows up, I'd like to remove that one, too.
Could you tell me how to do it?
I'm looking for a good permanent/persistent RDP Remote Desktop setup to the Windows 7 machine I'm mostly using as HTPC and file service. It would be ideal if the setup also included the ability to wake the HTPC from sleep. I would like to RDP with Windows 7/8 'console', plus iPAD and Android handsets/tabs.What's the best application to use for this? the ones I know of offhand all require intervention on both ends, which is not what I'm after. I need more of a server type setup
View 1 Replies View RelatedI got rid of the WildTangent games console that came on my Toshiba computer, however, the games still show up. I have carefully removed registry entries related to it(making a backup of the registry) and they still remain. I have also used Revo Uninstaller Pro and removed what it found.
View 4 Replies View RelatedThe Services console I use all the time. To go through and change everything every time is ridiculous including window size. I tried (using the hidden Admin account) choosing Author mode, un-checking the "do not save changes" check box, but the O/S won't allow change the services.msc file. I even tried to rename the file, which did save, but only limited changes were saved. W/O using a 3rd party program (which seems to be the only way anything can get changed with Windows 7), how can something that was easy (by changing the attribute) be remembered??
View 3 Replies View Relateda few days ago i've installed Windows 7 64-bit(ultimate),everything seems to be going well except for the sound card -.-, I go on the creative site and download the drivers for 64 bit windows seven, but when it comes to the end of the installation gives me a message saying the device is not supported as well if I try to open the audio console same message, I tried the modified drivers and the problem seemed to be resolved, but it is not the same as the original drivers, does anyone know how to fix?
View 9 Replies View RelatedI have the Creative XF-i Extreme Audio soundcard on my system and since upgrading to Windows 7, I am missing the THX console and also the Creative Volume Panel applications. I have used my original Creative CD and installed the drivers and software etc from that in hoping to be able to extract just them components but I can't and they don't seem to be there and I have looked through all folders etc. Obviously being the very original CD that first shipped with PC the drivers and applications are out of date so Creative Auto Update takes care of that. However, what it does not do is find nor install those said applications. I am disappointed that they are not included and when running a new auto update scan it finds no new updates and says I have the latest available software. I have even been on the Creative website and when I do eventually find my soundcard, the updates etc do not show anything to do with the THX console. Basically, it was an interface that let you adjust bass gain and boost and let you physically adjust sliders and effects to suit. Nice feature and I have it in XP, just not win 7
View 4 Replies View RelatedI need to change a registry setting so i can use my raid drive,which is isastorV or wahtever, to 3 but once im done editting the registry under recovery console in windows 7. (from a repair disk)i noitce, that when i return to recovery console after a reboot, the setting has reverted back to 0 from its change of 3.In other words.Regedit is not saving any changes i make to it (the registry) under recovery console).
View 3 Replies View Relatedconsole window host has stopped working, this message always pop up on laptop screen, please help me fixed this problem. im using window 7 ultimate os.
View 1 Replies View RelatedToday i on my laptop ( asus vx 6 ) and i got an error say " Bootmgr is missing "i load up my CD and went into recovery option, and my OS was never listed over there.
View 8 Replies View RelatedI can't login locally on console when first time I have logged in using remote desktop after restart. When I am in front of the console again, try to login locally system seem to load my desktop but for only a while. It shows only blank screen for a second and logon screen appears again. I can try to logon milion times - always the same. But when first time I have logged on console, after that logged using remote desktop, and then try another time log on using console everything works fine.
View 2 Replies View Related