Gmod Failed To Load Launcher Dll
Jun 28, 2012
First of all. I was playing gmod successfully yesterday, today i downloaded some things into my gmod, i tried to play it.and it Gave me this: Failed to load launcher DLL, my brother gave me advice and he said: ''You should delete all the files and reinstall gmod on steam'' I tried, but.. it still gave me the same error, no diffrences.And yes, i am a girl, i know girls can be professional technics but im not the master of that so dont ask me to do
View 1 Replies
ADVERTISEMENT
May 5, 2012
No one can connect to Gmod server
View 3 Replies
View Related
Jan 23, 2011
statement of windows failed to load because a critical system driver is missing or corrupt. It said for me to insert disk, or contact administrator however, I have no disk
View 3 Replies
View Related
Nov 27, 2011
Been noticing issues with this for a while, was wondering if there is a fix
View 6 Replies
View Related
Feb 14, 2012
Today I started windows with it's default settings and randomly crashed at logon screen,it says that user account service service failed to load,I tryed to restart but same problem.I don't have another account so I can only log with safe mode
View 1 Replies
View Related
Dec 8, 2012
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
View 7 Replies
View Related
Dec 19, 2009
tracking down and getting rid of things that cause error to appear in event log. one of the few left is the rx filter failed to load issue. seems to be due to roxio program somehow and perhaps related to 32/64 bit issues. suggestions or ignore?
View 1 Replies
View Related
Aug 29, 2012
by accident my power source for my computer shut off so i rebooted my computer. then it started to pop up setupapi.dll is missing and failed to load powrprof.dll. now i can't run majority of my programs nor can i watch videos on Internet.
View 2 Replies
View Related
Jan 17, 2011
I want to install Windows 7 to a UEFI-compatible netbook that only has a SD Card slot and a single USB Port (the netbook I'm refering to is the CR-48 if anyone is curious)I know this computer supports UEFI (I was able to start the Fedora 14 EFI and Windows 7 x64 EFI installers) but my assumption is that EFI-based OS installs require you to have the disc inserted (both installers failed to actually load).
View 2 Replies
View Related
Jul 20, 2009
I had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies
View Related
Jan 26, 2012
I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe
Status: 0xc0000221
Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
View 4 Replies
View Related
Dec 16, 2012
Every time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies
View Related
Oct 29, 2011
I turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
View 4 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Jan 21, 2012
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
View 2 Replies
View Related
Aug 4, 2011
I recently bought a new PC and am running Windows 7 64 bit. I'm trying to install some older games (Might and Magic 6 7 and 8 to be exact) and every time I try to run the setup it acts like it's loading then nothing pops up. If I wait 5-10 mins a setup bar will pop up but immediately stops responding. The exact error is "32 bit setup launcher has stopped responding"...so I'm assuming this has something to do with my 64 bit Windows.
View 1 Replies
View Related
Dec 16, 2011
i have purchase laptop in which all ready sound blaster &creative console volume launcher are installed but volume launcher i have uninstalled by mistake can i installed again. my system detail dell studio 1558.service tag 7d776bs.
View 1 Replies
View Related
Dec 19, 2012
Auto Sync Launcher dialog box appears when the computer boots up. I heard that re-installing service pack 1 should fix the problem, however, I tried this and it still appears. What should I do next to solve this problem? I even tried system restore but that was ineffective.
View 2 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
Mar 7, 2012
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
View 1 Replies
View Related
May 8, 2012
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies
View Related
Oct 3, 2012
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
View 3 Replies
View Related
Apr 9, 2011
I am trying to uninstall a program called PCStitch. I get the error message "installscript setup launcher has stopped working". The program closes and I can go no further. I have notified the PCStitch techs and they have never heard of the program doing it and seem to have no answer how to fix it. I get the same message when I try to download the latest version of PCStitch.
View 1 Replies
View Related
Nov 10, 2011
can't find java virtual machine launcher
View 1 Replies
View Related
Jun 22, 2009
How to Create Custom Jump Lists in Windows 7 ?
View 0 Replies
View Related
Oct 25, 2010
I have windows 7 ultimate 64 bit version. There is only one program that I cannot install because I get an error message. The error "32-bit setup launcher has stopped working". How do I get around that?
View 11 Replies
View Related
Dec 11, 2012
could not find the main classluraRunner.program will exit. this error msg is every 30 secs to display on my computer.
View 1 Replies
View Related
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
View Related
Apr 7, 2012
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies
View Related
Jan 12, 2013
Recently my computer is always at 100% even when no apps are running. But as soon as i run Task manager load reduces. This doesnt happen in safe mode. Im sure that this is a virus. When i scan my computer with Avira Antivirus (Free) it doesnt detect anything
View 16 Replies
View Related
Mar 13, 2011
I have restore points being created but on the occasions that I've tried to restore they have failed
View 3 Replies
View Related
