I want to install Windows 7 to a UEFI-compatible netbook that only has a SD Card slot and a single USB Port (the netbook I'm refering to is the CR-48 if anyone is curious)I know this computer supports UEFI (I was able to start the Fedora 14 EFI and Windows 7 x64 EFI installers) but my assumption is that EFI-based OS installs require you to have the disc inserted (both installers failed to actually load).
View 2 RepliesI recently just build a new setup with Asus P8Z77-V LK, this motherboard comes with UEFI boot and legacy BIOS boot support.So I tested install windows 7 in both mode, and I didn't find any advantage of UEFI consider it is a new technology been promoted quite a lot for recent years.The benefit I found is: a graphic BIOS setup, which is useless to most users if you don't OC. Even you did, I still find using keyboard to navigate through the menu is much easier than mouse.Faster boot time? very negligible, could be 31 seconds compare to 28 seconds. As I timed use my stopwatch, the value could include a few seconds human error as well.Support boot from > 2.2TB HDD? nowadays most user use SSD as boot drive so this really doesn't matter.GPT disk partition? don't see any benefit here compare to legacy MBR...
View 3 Replies View RelatedCurrently having a wake on lan issue with a certain computer.
The machine is setup correctly but the windows boot information is stored in a 100mb UEFI partition, and when the computer wakes on lan, it will not boot windows, just sit at a blank screen. When it wakes on lan it is trying to boot from the legacy device (same blank screen happens if you choose to boot from it from bios) ive tried updating the bios but no luck, all settings seem to be as they should be.
Is there some trick to get it to load the UEFI MBR, or is there a safe way other then reformatting the machine to move the MBR over to the legacy device itself?
looking for best graphic card for my system cor2duo 2.4 4GB DDR2 dg31pr intel board Samsung 2233 550watt supply
View 1 Replies View Relatedstatement of windows failed to load because a critical system driver is missing or corrupt. It said for me to insert disk, or contact administrator however, I have no disk
View 3 Replies View RelatedI had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies View RelatedI have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe
Status: 0xc0000221
Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
I turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies View Relatedinstalling Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
Been noticing issues with this for a while, was wondering if there is a fix
View 6 Replies View RelatedFirst of all. I was playing gmod successfully yesterday, today i downloaded some things into my gmod, i tried to play it.and it Gave me this: Failed to load launcher DLL, my brother gave me advice and he said: ''You should delete all the files and reinstall gmod on steam'' I tried, but.. it still gave me the same error, no diffrences.And yes, i am a girl, i know girls can be professional technics but im not the master of that so dont ask me to do
View 1 Replies View RelatedToday I started windows with it's default settings and randomly crashed at logon screen,it says that user account service service failed to load,I tryed to restart but same problem.I don't have another account so I can only log with safe mode
View 1 Replies View RelatedSince the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
tracking down and getting rid of things that cause error to appear in event log. one of the few left is the rx filter failed to load issue. seems to be due to roxio program somehow and perhaps related to 32/64 bit issues. suggestions or ignore?
View 1 Replies View Relatedby accident my power source for my computer shut off so i rebooted my computer. then it started to pop up setupapi.dll is missing and failed to load powrprof.dll. now i can't run majority of my programs nor can i watch videos on Internet.
View 2 Replies View RelatedEvery time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies View RelatedMy google-fu is failing me and I can't seem to find any solution before I return some of my new hardware. I just picked up and assembled the PC. I unstalled Windows 7 64 bit ultimate without any issues. As soon as I add the Ceton InfiniTV4 to any PCI-E slot, I can't get past the loading operating system.
The Ceton card works fine in my other other PC with a Gigabyte board so I am guessing it is some conflict with something on the Z68 board. This is a fresh install with only driver updates, and Windows 7 updates.
Please could anyone tell me how to download creatacard onto my laptop with windows 7, I'm finding it most frustrating as this is not the only programme compatible with windows 7.
View 2 Replies View RelatedI'm considering a newer PC running Win 7 Home. Can I use my Dazzle brand usb card reader to load my photos from an older Sony camera?
View 2 Replies View RelatedQuick summary: SATA Controllers on motherboard are not working. Ordered and installed a PCI-E SATA Controller Card. Connected Hard Drive & DVD Drive to new card ports. Upon attempting to boot installed windows 7, it spontaneously restarts before loading. It seems that I need to get the Controller Card's drivers installed. i try startup repair mode, and I can load the driver and see the Windows 7 installation after that, but then I don't know how to permanantly add the drivers for this installation.
View 1 Replies View RelatedI've Lenovo G570 I want to know that I can install Windows 7 in UEFI on my laptop or not? I didn't see any UEFI option in my BIOS menu, the specs are:
Lenovo G570,
Intel Core i5-2430M 2.4Ghz
4GB DDR3 SDRAM
Intel HD Graphics 3000
this has been dealt with in various places but not to my total satisfaction. So bear with me if the answer is hidden somewhere in the forum.I've got an oem asus with 2 hdds the first of which has Win 7 64 home pre-installed via uefi boot manager. It is a gpt formatted disk. The second disk is empty and is set up with mbr. I wish to dual boot onto the second disk with Win 7 32 Pro but fear a rejection due to the fact appparenly Uefi will not manage 32 bit installs/boots. More to the point , will the mbr variance on the 2nd disk somehow make for an exception to this 32bit 'prejudice' on the part of uefi or simply make matters worse? My bios has a single option regarding a legacy setting connected with uefi which is disabled. PxO.or rather. Gregrocker seems to think obviating the problem with 2 physically separate installs (i.e. Hdd disconnect) will allow a Bios based boot as opposed to a Uefi/Windows managed one. Is this workaround a sure thing and my only option or is there a practical way to go the classic route with the auto boot loader screen on start up? Perhaps a better way to put it is..on dual boot systems is it true that you can't have BOTH uefi and the bios directing the show. You gotta choose one or the other. Frankly, to my novice mind this whole problem seems to be a regression from the XP days.
View 9 Replies View RelatedSince UEFI exists, some people talk about BIOS replacement by UEFI in short-term (2011 for exemple) (see "News").Who never has problem with BIOS bugs ? I must fight against several problems on one of my mobos because of its incorrect BIOS code, essentially for long time boot BIOS and very buggy S3 sleep mode.However, when I read many posts about people who have installed their Windows 7 x64 in UEFI mode, I'm afraid of some new problems that UEFI causes, according to these people, even during a Windows session, even if installation was fine.I would like to know your experience about UEFI, on motherboards which support it (my motherboard is an Intel DG45ID which proposes UEFI boot).
View 2 Replies View Relatednew mobo won't load sound card?
View 7 Replies View RelatedI have windows 7. cannot load card games but can play pop-pit.
View 3 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
I'm using a GA z77x-UD5H and it has its own UEFI dualBios. I am using an external dvd drive to try and install windows 7 because I just built this pc. I have nothing on my HDD yet. All I am trying to do is figure out how to boot using the DVD drive to install windows.
View 5 Replies View Related