The Driver DriverWUDFRd Failed To Load For The Device?
Dec 8, 2012
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
View 7 Replies
ADVERTISEMENT
Nov 12, 2012
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 �C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
[code]....
Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.On occasions the only response is the pop up message driver device failed to install.The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same result. Have had a Microsoft IT tech look at the computer but he is at a loss.
View 14 Replies
View Related
Apr 4, 2011
Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???
View 2 Replies
View Related
Nov 4, 2011
My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
View 3 Replies
View Related
Oct 2, 2011
I have a Dell XPS , bought it 2 weeks ago , all good , but when I tried to re-install the nvidia graphics driver the windows crashed, and the boot system was down.Tried to fix it , couldnt , and I didnt make a backup either so I went for the format. At the moment the HDD is clean and when I try to install windows7 i get the following error:"Load Driver:a required dvd drive device is missing". I tried everything that I found on this forum/google related to this problem but with no success.
View 4 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
May 8, 2012
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies
View Related
Jan 23, 2011
statement of windows failed to load because a critical system driver is missing or corrupt. It said for me to insert disk, or contact administrator however, I have no disk
View 3 Replies
View Related
Nov 27, 2011
Been noticing issues with this for a while, was wondering if there is a fix
View 6 Replies
View Related
Jun 28, 2012
First of all. I was playing gmod successfully yesterday, today i downloaded some things into my gmod, i tried to play it.and it Gave me this: Failed to load launcher DLL, my brother gave me advice and he said: ''You should delete all the files and reinstall gmod on steam'' I tried, but.. it still gave me the same error, no diffrences.And yes, i am a girl, i know girls can be professional technics but im not the master of that so dont ask me to do
View 1 Replies
View Related
Feb 14, 2012
Today I started windows with it's default settings and randomly crashed at logon screen,it says that user account service service failed to load,I tryed to restart but same problem.I don't have another account so I can only log with safe mode
View 1 Replies
View Related
Dec 19, 2009
tracking down and getting rid of things that cause error to appear in event log. one of the few left is the rx filter failed to load issue. seems to be due to roxio program somehow and perhaps related to 32/64 bit issues. suggestions or ignore?
View 1 Replies
View Related
Aug 29, 2012
by accident my power source for my computer shut off so i rebooted my computer. then it started to pop up setupapi.dll is missing and failed to load powrprof.dll. now i can't run majority of my programs nor can i watch videos on Internet.
View 2 Replies
View Related
Jan 17, 2011
I want to install Windows 7 to a UEFI-compatible netbook that only has a SD Card slot and a single USB Port (the netbook I'm refering to is the CR-48 if anyone is curious)I know this computer supports UEFI (I was able to start the Fedora 14 EFI and Windows 7 x64 EFI installers) but my assumption is that EFI-based OS installs require you to have the disc inserted (both installers failed to actually load).
View 2 Replies
View Related
Jul 20, 2009
I had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies
View Related
Jan 26, 2012
I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe
Status: 0xc0000221
Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
View 4 Replies
View Related
Dec 16, 2012
Every time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do
View 2 Replies
View Related
Oct 29, 2011
I turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
View 4 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Jan 21, 2012
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
View 2 Replies
View Related
Jul 30, 2010
I tried to bring my computer out of hibernation and was confronted with:Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc0000000e
Info: The boot selection failed because a required device is inaccessibleRecently I shrank one of the partition on the data drive in order to enlarge the other partition on the data drive. The enlarged data drive contains the folders of some installed games but the system disk is separate and was not altered in this way. I'm pretty sure that I hibernated and recovered from hibernation at least once since that change was made.Could it be that the OCZ drive has developed a fault? Or would it then be unable to even display this message?When I attempt to repair the installation using the Windows 7 disc, the operating system isn't listed. I don't think that there are any drivers for me to load - I think it's supposed to be automatic (the driver must be a part of Windows own included set).
View 6 Replies
View Related
Oct 14, 2010
right, i've noticed another thread with the similar problem, here, and apparently it's fixed, but as i'm running my system on a laptop, i'm wondering what i can do to recover my system without any data loss. error message's more or less the same, "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disc and restart your computer.
2. choose your language settings, and then click next.
3. click repair your computer
if you do not have this disc.........etcetc
status: 0xc000000e
info: the boot selection failed because a required device is inaccessible."
i'm running an msi cx420 that's 6 months old, windows 7 32 bit. this problem only surfaced after i defragged my laptop and updated MSE and restarted. to be clear, my laptop isn't of much importance but my data is what i'm worried about. edit: also, i've tried to burn the windows 7 system repair disc on a USB as follows, but with no luck. i'm running windows xp on this computer and if anyone could also help me on this i'd be much obliged.
View 6 Replies
View Related
Aug 6, 2012
Boot > advanced options > maximum memory > i checked and changed it to 4GB
After restarting my pc, I reentered to maximum memory and it was 0. I restarted my pc again and it is not working anymore .
Status: 0xc000000e
The boot selection failed because a required device is inaccessible.
View 3 Replies
View Related
Sep 14, 2012
I have an Intel i5, Windows 7 Ultimate, and an SSD as my main drive and 2 SATA HDDs.One day, I got a BSOD appeared and my PC restarted restarted. After that, the following error appeared: Window failed to start. A recent hardware or software change might be the cause. To fix the problem:
1.Insert ....
2. .... ... status: 0xc000000e info: The boot selection failed because a required device is inaccessible
Also I noticed that BIOS only detected one of HDDs, not SSD neither other HDD.Sometimes, Windows can be started, but it doesn't work very well.When trying to copy data from F: to an external USB, it copies for a short time and then Windows 7 becomes unresponsive. This also happens in safe mode.After several reboots, now Windows will not boot and I get the error "The boot selection failed because a required device is inaccessible." And the BIOS only detects the SSD.
UPDATE: my disks:
HDDs
WDC WD10EARS-22Y5B1
Seagate ST31000528AS
SSD
FM-25S2S-120GBP2 - G.SKILL
View 1 Replies
View Related
Apr 5, 2011
I was on my tour to Cyprus and last night I came back I saw my PC uptime was 22days.I asked my brother wht's going on , he told me if you'll shut down pc, i'll not get it stared. Due to some reasons I restarted my pc and now its giving me this error"the boot selection failed because a required device is inaccessible". I've 2 drives 500GB + 1000GB, windows is on 500GB drive which I check through BiOS & shows SATA Port 0 = (0.0GB), SATA Port 1 WDC WD10EARS-0 (1000.2GB).
View 5 Replies
View Related
Jan 10, 2012
after messing around in disk management i rebooted and got this message:0xc000000f -- The boot selection failed because a required device is inaccessible. i think i might have messed up the primary partition. i have no recovery media..
View 1 Replies
View Related
Jun 28, 2012
I went into bios and changed the boot sequence to boot from CD. The keyboard works fine when in bios but when it says press any key to boot from CD the keyboard doesn't seem to function. After that it takes me to this message.
Status: 0xc0000225
Info: The boot selection failed because a required device is inaccessible
I can't log onto windows because the hdd been formatted already. Is there anyway to fix this issue and anyone know how am very grateful for your support.
View 7 Replies
View Related
Aug 25, 2012
I've connected my USB microphone, but Windows tried to install it only once and said Failed. I can't see my microphone now, and not sure what to do. I've checked Device Manager, there's that exclamation sign next to USB Audio Device, but when I click Update Drivers, it just says that Drivers are Up To Date. I've tried installing Realtek HD Audio drivers instead, but they don't work - I can see in Control panel that they are installed, but they are nowhere to be seen on Windows, and didn't change anything after reboot. How can I get this USB mic working?
View 4 Replies
View Related
Jan 30, 2012
I've been getting a BSOD what seemed like once a week for the past 6 months on my laptop, which now won't even boot into windows. The first hdd was the first to go about a year ago as it is rarely even recognized anymore, so I just moved ship to the 2nd hdd which now seems to have followed suit. Before I go out and buy a new HDD a want to confirm that it is indeed the hdd and not memory, or just corrupt drivers or something simple to fix.What's wierd is that when I try to do the recovery disk option or even boot from the original win 7 cd to do a fresh install, I get no where because its so god awful slow now. I literally had to leave it sit to load into the repair disk option menu for a good 3 hours. I can't even start a fresh install of win 7 because of how slow everything is.I also can't press F8 to get into the boot selection menu to select safe mode, or last known good config etc...I updated the bios which made no difference. I opened up the laptop and disconnected and reconnected the one hdd that was easiest to get to(the other is a bitch) and nothing. I also did a scandisk on the only hdd that gets recognized and in the options it said it had a partition size of 0, but had 2 million sectors to scan which it found 0 bad sectors in.Also when it boots up now its not even half as loud as it used to be yet all the fans seem to be spinning.Why would a couple of dead hdds prevent me from booting from a disk or usb to try a fresh install?
Here are the specs.17"WUXGA/GT,w/MULTI DRIVE VISTA ULTIMATE 64 bit WINDOW 7 ULT UPGRADE COUPON Core i7 920 (2.66 GHz) 8M 6GB DDR3 1066 (3 DIMMS) nV GeForce Go GTX 280M w/1GB INTEL WI-FI LINK 5300AGN NP9280 BLUETOOTH CARD 2x 2.5" Seagate SATA 500GB (7200rpm) HDDs RAID-OFF RAID-OFF EXT. USB ATSC HDTV TUNER W/REMOTE EXPRESS CARD SLOT MCE REMOTE NP9262 SMART LI-ION BATTERY
View 2 Replies
View Related
Jan 9, 2010
I recently built a windows 7 home premium PC with an Intel 160 GB SSD as (C) for OS/programs and second 1TB HDD as (D) for data and backups. I also have a DVD burner (H). They are all SATA drives running in AHCI mode. Immediately after installing just windows, I used the windows backup feature to successfully create a system image to a local disk (D) which was and still is nearly empty. The next day, after installing drivers, updates, and a few programs, I went to create a second system image but this time it failed. The process started as it should have but halfway through it failed with the following message:
"The backup failed"
"The device is not connected (0x8007048f)"
At that point, after exiting the program, the D drive does not show up on my computer. Upon rebooting the D drive reappears. I searched the web and found some references to checking whether volume shadow copying services and their dependent services were working and that didn't work. Another reference said to try updating to a newer bios as some have bugs that screw up the enumerator for the drive order. The BIOS I use is the latest and wasn't changed since my first successful attempt at creating the system image.
Windows 7 Home Premium
Gigabyte GA-P55A-UD4 Bios 6 (latest)
Intel 160 GB SSD (C) OS
1 TB HDD (D)
Raedon 5770
4 GB DDR3 RAM
View 3 Replies
View Related
Jan 5, 2012
how do i find driver for unknown device on my laptop?
View 3 Replies
View Related