Windows Cannot Load The Device Driver, Code 39
Nov 4, 2011
My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
View 3 Replies
ADVERTISEMENT
Jul 30, 2012
My usb composite driver says code 10
View 1 Replies
View Related
Dec 8, 2012
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver DriverWUDFRd failed to load for the device WpdBusEnumRootUMB2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.From checking forums and searching I have found a few others with this issue and a few articles on its cause, WUDFRd failed to load for the device, Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
View 7 Replies
View Related
Oct 2, 2011
I have a Dell XPS , bought it 2 weeks ago , all good , but when I tried to re-install the nvidia graphics driver the windows crashed, and the boot system was down.Tried to fix it , couldnt , and I didnt make a backup either so I went for the format. At the moment the HDD is clean and when I try to install windows7 i get the following error:"Load Driver:a required dvd drive device is missing". I tried everything that I found on this forum/google related to this problem but with no success.
View 4 Replies
View Related
Jan 8, 2013
I have an HP-dm4 2070us and the touchpad will not work. When I go to hidden devices and the driver( Alps) for it is flagged that its not working properly and has an error code 24 for not working or present. I updated the driver and bios (and before that tried rolling back the bios. I even go to Update Driver and it says it's updated and no issues, but then when I exit back out to the main list the error code is still there and it doesn't work. I have to use tab as I don't actually have a mouse. I am on a different computer now. Another HP that I can't get the wireless printer to work on (which is an HP - a gift, otherwise I at this point would not have purchased another HP product).
View 1 Replies
View Related
Jun 13, 2012
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies
View Related
Oct 29, 2011
Windows cannot load drivers code 10?
View 2 Replies
View Related
Nov 19, 2012
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
View 9 Replies
View Related
Dec 9, 2012
My webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies
View Related
Apr 1, 2012
I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this:
Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
View 1 Replies
View Related
Jul 28, 2012
Windows has stopped this device because it has reported problems. (Code 43). I have been sent around in circle trying to use the Microsoft fix it 'genius'. I am trying to connect my Smartphone via usb cable to computer. Battery charges but it either does not detect it at all or comes up with the above error message.
View 7 Replies
View Related
Jan 2, 2010
1. First in the device manager, my "Microsoft Virtual Wifi Miniport Adapter is getting and error that says "Windows has shut down this device (code 43)"
2. The speed of the internet spikes between normal speed(10k-18k bytes/s to around 40 bytes a second
3. In the event view there is a warning that says: "NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The entry is not found. (0x800706E1)"
4. Another problem in the event viewer: "Name resolution for the name isatap.ktechsystems.ca timed out after none of the configured DNS servers responded."
5. Yet another problem, at this point my internet slows down to an unbearable speed: "This computer was not able to set up a secure session with a domain controller in domain KTECHSYSTEMS due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain."
If anyone has a suggestion on how i can fix this, it would be greatly appreciated.
ps.
-internet worked fine while hooked into the router through a cable
-im network retarded
-I apologize for my ignorance
View 9 Replies
View Related
Mar 9, 2012
i have hp mini note book and found usb error 43 i have reinstall all drivers but still received error
View 1 Replies
View Related
Nov 28, 2011
Windows 7 has stopped this device because it has reported (Code 43) usb?
View 2 Replies
View Related
May 30, 2012
Windows 7 has stopped this device because it has reported (Code 43)?
View 1 Replies
View Related
Jan 27, 2012
I am having issues with the atheros ethernet, when I try to update drivers I get the following "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies
View Related
Dec 2, 2009
trying to install a usb device on windows 7 but get this error what can i do?
Error: Windows has stopped this device because it has reported problems (Code 43)
View 3 Replies
View Related
Nov 25, 2011
Windows has stopped this device because it has reported problems. (Code 43).
View 2 Replies
View Related
Dec 2, 2011
Windows has stopped this device because it has reported problems. (Code 43)
View 1 Replies
View Related
Oct 24, 2012
Gateway NV55C and Windows 7. When use SOLIC SLR-8188MV usb headphone, get following msg.Windows has stopped this device because it has reported problems. (Code 43)Checked with another usb headphone, worked fine.
View 6 Replies
View Related
Aug 23, 2012
So i've been playing games on my pc with a usb controller and it's been bugging but know when i plug it in a usb port i get usb unknown device does anyone know how to fix that?
View 9 Replies
View Related
Oct 16, 2012
I am getting this error in device manager over and over and over, i have uninstalled the driver, and reinstalled it over and over, i keep getting the same error, my hauppauge colossus card was working perfectly then all of a sudden i get this error, i have used ccleaner to repair my registry all to no avail, I think i need to do something in the registry to fix this but have no idea exactly what. What do i do?
View 12 Replies
View Related
Jan 12, 2013
I have a Nikon Imaging scanner which my PC detects on connection. I have the correct driver which device manager installs with a code 10 error, the device cannot start.My PC is running Windows 7 64bit. I should point out that the scanner works correctly on my old PC running Windows XP, so there is no problem with the hardware. Anyone got any ideas why I might be getting the code 10 error on my new PC?
View 6 Replies
View Related
Sep 30, 2009
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies
View Related
Aug 30, 2012
Lately I've been getting a sound prompt telling me a device is not connecting. Everything I need seems to be so I can't figure it out.
It's just a bit of a nuisance but I'd like to find out. Is there a command prompt to ask the computer what isn't connecting?
View 2 Replies
View Related
Nov 1, 2009
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
View 9 Replies
View Related
May 31, 2011
The drivers for this device are not installed. (Code 28)
View 2 Replies
View Related
Jun 27, 2011
Somehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
View 2 Replies
View Related
Jan 4, 2012
Windows 7 ultimate 64, my Atapi iHAS124 B ata CD/DVD device keeps "disappearing" try running the Microsoft "fis it now"...and get A driver service for this device has been disabled. An alternate driver may be providing this functionality. Code 32 Tried uninstalling the device and installing new drivewr....same result. This is the 2nd time it has happened...last time I ended up having to rebuild the system from scratch.
View 7 Replies
View Related
Dec 17, 2012
D3d device error code 2005530516?how to solve this error?
View 1 Replies
View Related
Jul 5, 2010
i have a toshiba satellite l555d and i turn on the USB device say a error code 43.
View 3 Replies
View Related
